• 제목/요약/키워드: compressive capacity

검색결과 780건 처리시간 0.027초

혼화재료에 의한 경량기포 콘크리트의 품질향상에 관한 기초적 연구 (A Fundamental Study on the Quality Improvement of Lightweight Foamed Concrete with Admixture Types)

  • 신재경;정광복;이율구;이건철;윤기원;한천구
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2006년도 춘계학술논문 발표대회 제6권1호
    • /
    • pp.35-38
    • /
    • 2006
  • This study investigated fundamental properties of lightweight foamed concrete using cement kiln dust (CKD) and both fly ash(FA) and stability agent. Test results showed that concrete incorporating more amounts of admixture decreased slump flow and it caused increase of superplasiticizer in order to secure the fluidity performance. In addition concrete adding stability agent showed stable flow state, resisting segregation of materials and decreasing bleeding capacity. Sinking depth of concrete incorporating 20% of CKD and adding 0.002% of stability agent was indicated at 0mm. For the properties of hardened concrete. compressive strength of concrete incorporating CKD declined due to a lower appearance density, compared with other specimens. The difference of that was not very significant and the value of ail specimen was higher than KS range. Moreover strength of concrete incorporating CKD was even higher at curing temperature $5^{\circ}C$. Tensile strength ratio of concrete incorporating CKD was indicated between 0.50 to 0.59, which is higher value than control concrete. Heat conductivity of concrete incorporating FA was under the KS range while concrete incorporating 20% of CKD was satisfied in KS. Concrete adding stability agent improved insulation performance due to the lower heat conductivity. In conclusion, it is possible that concrete incorporating 20% of CKD and adding 0.002% of stability agent can secure high quality of lightweight foamed concrete.

  • PDF

동결토의 일축압축강도와 전단강도 상관관계 분석에 관한 연구 (Analysis of the Relationship between Unconfined Compression Strength and Shear Strength of Frozen Soils)

  • 강재모;이장근;이준용;김영석
    • 한국지반신소재학회논문집
    • /
    • 제12권3호
    • /
    • pp.23-29
    • /
    • 2013
  • 동결토는 물과 얼음의 상변화에 따라 일반적인 흙과는 다른 거동을 보이며, 동결토의 강도는 온도, 함수비, 시간, 토질 특성 등 다양한 인자에 의해 영향을 받는다. 특히 지반이 동결되는 경우, 얼음과 흙 입자의 결합력에 의해 높은 강도 특성을 보이며, 이때의 전단강도는 흙의 구조적 결합에 영향을 미치는 얼음과 세립분의 함량에 따라 달라지며, 이로 인해 점착력이 동결토의 전단강도에 미치는 영향은 증가한다. 본 논문에서는 동결조건에서 직접전단시험과 일축압축강도시험을 실시하여 온도에 따른 흙의 강도 특성을 확인하였으며, 점착력과 일축압축강도와의 상관관계를 확인하였다.

수치해석을 이용한 확공형 앵커의 인발거동 특성 (Pullout Behavior Characteristics of Enlarged Cylinder Type Anchor Using Numerical Analysis)

  • 문준식;이민주
    • 한국지반신소재학회논문집
    • /
    • 제16권4호
    • /
    • pp.113-118
    • /
    • 2017
  • 확공형 앵커에 대한 인발시 거동 특성을 분석하기 위해 유한요소해석 프로그램을 이용하여 수치해석을 수행하였다. 확공형 앵커에 대한 수치해석 결과에서 확개각도의 변화에 따른 앵커의 지지력 비율 결과값과 앵커의 강선에 작용하는 축하중 결과값의 비교 분석을 통해 확개각도의 크기가 커질수록 앵커의 지지력 증대효과가 나타나는 것을 알 수 있었다. 확개각도가 $30{\sim}60^{\circ}$인 경우 앵커인장력에 따른 변형 및 응력분포 특성은 유사하게 나타났으나 동일한 앵커인장력이 작용할 경우 확개각도에 따라 상부 변위발생량의 차이로 인하여 마찰저항력 발현정도에 차이가 나타남을 볼 수 있었다. 또한, 본 연구에서 적용된 확공형 비트가 상부를 원뿔형으로 굴착함에 따라 그라우팅부 상부 원뿔위치에서 최대압축력과 인장력이 발생하는 것이 확인되었으며, 상부 그라우팅부의 인장파괴가 발생할 가능성이 있음을 알 수 있었다.

고온에 노출된 H-형강 압축재의 유한요소해석 (Finite Element Analysis of H-Shaped Compressive Member Exposed High Temperatures)

  • 이수헌;이희두;최준호;신경재
    • 한국화재소방학회논문지
    • /
    • 제30권5호
    • /
    • pp.54-59
    • /
    • 2016
  • 구조재료 중에서 강재는 불연성 재료이지만 열전도가 높고, 온도상승에 의하여 강성의 저하가 높은 편이다. 일반적으로 강재의 항복강도 및 탄성계수는 $350^{\circ}C$에서 70%, $600^{\circ}C$에서 50% 이하로 감소하기 때문에 고온에서의 철골구조의 재하능력은 급격히 감소하게 된다. 통상 내화구조로 인정받기 위해서는 공인기관으로부터의 품질시험을 거쳐야 한다. 하지만, 실물내화실험은 공간과 시간의 제약, 고비용의 문제점을 안고 있으므로, 본 연구에서는 ABAQUS 프로그램의 유한요소법을 이용한 열해석을 수행하여 압축을 받는 H-형강기둥의 내화실험과의 비교로 해석모델의 신뢰성을 입증하고, 실물실험의 보완책으로의 가능성을 제시한다.

경골 내 변형률 및 응력 분포 특성 분석을 통한 새로이 개발된 재치환용 인공슬관절의 생체역학적 안정성 평가: 유한요소해석 (Evaluation of Biomechanical Stability of Newly Developed Revision Total Knee Arthroplasty through Strain and Stress Distribution Analysis within the Tibia: Finite Element Analysis)

  • 한바울;장영웅;유의식;김정성;김한성;임도형
    • 대한의용생체공학회:의공학회지
    • /
    • 제34권1호
    • /
    • pp.14-23
    • /
    • 2013
  • In this study, biomechanical stability of the newly developed revision total knee arthroplasty (rTKA) was evaluated through strain and stress distribution analysis within the implanted proximal tibia using a three-dimensional finite element (FE) analysis. 2000N of compressive load (about 3 times body weight) was applied to the condyle surface on spacer, sharing by the medial (60%) and lateral (40%) condyles simulating a stance phase before toe-off. The results showed that PVMS within the revision total knee arthroplasty and the proximal tibia were less than yield strength considering safe factor 4.0 (rTKA: less than 10%, Cortical bone: less than 70%, Cancellous bone: less than 70%). The materials composed of them and the strain and stress distributions within the proximal tibia were generally well matched with those of a traditional revision total knee arthoplasty (Scorpio TS revision system, Stryker Corp., Michigan, USA) without the critical damage strain and stress, which may reduce the capacity for bone remodeling, leading to bone degeneration. This study may be useful to design parameter improvement of the revision total knee arthoplasty in biomechanical stability point of view beyond structural stability of revision total knee arthoplasty itself.

균열자기치유용 콘크리트를 사용한 전주의 구조 성능 (Structural Capacity of Poles Using Crack Self-healing Concrete)

  • 유성원;김상준;박홍기
    • 한국건설순환자원학회논문집
    • /
    • 제6권3호
    • /
    • pp.222-227
    • /
    • 2018
  • 최근 콘크리트 전주의 20~30년 이상 경과로 인한 노후화와 각종 자연재해로 인하여 전주의 손상/파괴로 인해 유지 보수에 대한 요구가 증가하고 있다. 이를 위해 최근 전 세계적으로 구조물에 발생한 균열을 스스로 치유하여 유지보수비용을 감소시킬 수 있는 자기치유 콘크리트 기술의 연구가 활발하게 이루어지고 있다. 이에 본 논문에서는 Fly ash, GGBS, CA 등이 혼입된 변수의 균열자기 치유 콘크리트를 이용하여 10m 크기의 실제 전주 10개를 제작하여 휨강도실험을 수행하였다. 고로 슬래그를 첨가한 콘크리트의 압축강도가 우수한 것으로 나타났으나, 플라이 애시를 첨가한 콘크리트는 기준강도에 다소 미달하는 것으로 나타났다. 또한 실험체의 균열하중은 KS F 4304 기준을 만족하였으며, 하중-처짐 및 변형률 관계의 경우, 플라이 애시를 첨가 실험체의 경우에는 유사한 거동을 보였지만, 고로 슬래그가 함유된 실험체의 경우 균열발생 후 결정촉진제가 혼입된 실험체는 대량의 변형률이 발생하는 것으로 나타났다.

SD500 철근용 충전식 슬리브 철근이음에 대한 해석 및 실험적 연구 (Analytical and Experimental Studies on Splice Sleeves for SD500 Rebars)

  • 오영훈;문정호
    • 콘크리트학회논문집
    • /
    • 제25권2호
    • /
    • pp.165-173
    • /
    • 2013
  • 이 연구에서는 설계기준항복강도 500 MPa의 HD25 철근과 HD32 철근에 사용할 수 있는 스플라이스 슬리브에 대한 실험 및 해석 연구를 수행하였다. 비선형 유한요소해석을 실시하여 적정 형상을 선정하였으며, 총 18개의 실험체를 제작하여 구조 실험을 실시하였다. 실험체는 철근의 종류, 슬리브의 길이, 그라우트 강도, 철근의 정착길이 등을 변수로 하였다. 동일한 변수의 실험체를 3개씩 제작하여 실험에서 발생 할 수 있는 오차를 해소하고자 하였다. 그리고 비선형 유한요소해석을 실시하여 구조실험 결과와 비교하였다. 총 18개의 실험체에 대한 인장실험 결과 모든 실험체가 구조설계기준에서 요구하는 조건을 만족함을 보였다. 그라우트의 강도와 철근의 정착길이는 슬리브 실험체의 강성 및 강도에 거의 영향을 미치지 않았다.

Partial Confinement Utilization for Rectangular Concrete Columns Subjected to Biaxial Bending and Axial Compression

  • Abd El Fattah, Ahmed M.;Rasheed, Hayder A.;Al-Rahmani, Ahmed H.
    • International Journal of Concrete Structures and Materials
    • /
    • 제11권1호
    • /
    • pp.135-149
    • /
    • 2017
  • The prediction of the actual ultimate capacity of confined concrete columns requires partial confinement utilization under eccentric loading. This is attributed to the reduction in compression zone compared to columns under pure axial compression. Modern codes and standards are introducing the need to perform extreme event analysis under static loads. There has been a number of studies that focused on the analysis and testing of concentric columns. On the other hand, the augmentation of compressive strength due to partial confinement has not been treated before. The higher eccentricity causes smaller confined concrete region in compression yielding smaller increase in strength of concrete. Accordingly, the ultimate eccentric confined strength is gradually reduced from the fully confined value $f_{cc}$ (at zero eccentricity) to the unconfined value $f^{\prime}_c$ (at infinite eccentricity) as a function of the ratio of compression area to total area of each eccentricity. This approach is used to implement an adaptive Mander model for analyzing eccentrically loaded columns. Generalization of the 3D moment of area approach is implemented based on proportional loading, fiber model and the secant stiffness approach, in an incremental-iterative numerical procedure to achieve the equilibrium path of $P-{\varepsilon}$ and $M-{\varphi}$ response up to failure. This numerical analysis is adapted to assess the confining effect in rectangular columns confined with conventional lateral steel. This analysis is validated against experimental data found in the literature showing good correlation to the partial confinement model while rendering the full confinement treatment unsafe.

합성수지를 이용한 원형단면 목재의 압축보강 성능에 관한 실험적 연구 (A Experimental Study on the Compressive Capacity of Circular Section Wood using Synthetic Resins)

  • 박성무;박광섭;강병두;하종한
    • 한국공간구조학회논문집
    • /
    • 제9권3호
    • /
    • pp.93-100
    • /
    • 2009
  • 최근 문화유산에 대한 관심이 고조 되면서 노후화된 건조물문화재의 보존에 대한 중요성이 대두되고 있다. 건조물문화재의 대부분이 목재를 주재료로 사용하였으며, 이들 건조물문화재의 노후화에 따른 부식 및 손상에 대한 보존수리는 부재자체의 문화재적 가치를 고려하여 원형유지를 기본원칙으로 한다. 이에 따라, 합성수지를 이용한 보존처리방법이 부각되고 있다. 이에 본 논문은 합성수지로 보강한 원형단면 목재의 압축보강 성능에 관한 실험적 연구로서 합성수지의 보강단면적비율, 단면의 보강방향, 보강길이, 합성수지강도를 변수로 하여 총 14개의 시험체를 제작하여 실험하였다. 실험결과 합성수지를 이용하여 적절하게 보강할 경우 신재이상의 보강효과가 있는 것으로 나타났으며 문화재의 보수 및 보강에서 가장 중요한 오센티시티(authenticity)를 확보할 수 있을 것이다.

  • PDF

가새골조의 연쇄붕괴 저항성능 (Progressive Collapse Resisting Capacity of Braced Frames)

  • 김진구;이영호;최현훈
    • 한국전산구조공학회논문집
    • /
    • 제21권5호
    • /
    • pp.429-437
    • /
    • 2008
  • 본 논문에서는 비선형 정적해석 및 동적해석을 이용하여 가새골조의 연쇄붕괴 저항능력을 평가하였다. 모두 아홉 개의 서로 다른 가새 형태를 고려하였으며, 모멘트골조의 해석 결과와 비교하였다 비탄성 정적해석 결과에 따르면 현행 기준에 따라 설계된 저층 가새골조는 1층 중앙에 위치한 기둥이 제거될 경우 연쇄붕괴 저항성능 기준을 만족하는 것으로 나타났으나 대부분 취성적인 파괴모드를 나타내었다. 특히 압축가새가 좌굴한 후 인장가새가 인장력을 발휘하기 전에 취약한 층의 기둥이 좌굴하는 것으로 나타냈다. Inverted-V형 가새골조의 경우가 가장 연성도 면에서 우수한 것으로 나타났다. 동적 해석 결과에 따르면 모든 가새골조는 중앙에 위치한 기둥이 제거될 경우 붕괴되지 않으며, 동일한 규모의 모멘트 저항골조에 비해 진동이나 처짐량이 작은 것으로 나타났다.