• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1775-1778
• /
• 2006

Through baking process on an interlayer, known as hole transporting layer, varying baking temperature up to 300 degree, which is considered as extremely high for polymer light emitting device (PLED) system, we found interesting relationship between packing density and morphology affecting device performance. Granular morphology shows that as temperature increases, grain size is getting smaller to pack closely and make interlayer harden. Such denser interlayer has temperature dependency of its own mobility, even without clear evidence of degradation of material itself. Its fact proven in a single film also reflects on multilayered PLED's performance like IVL, efficiency, lifetime. It's found that, especially, to enhance lifetime is related with thermal stability of interlayer and its mobility dependency to meet better charge balance. Therefore, it gives us understanding not only baking effect of interlayer, but also material & device designing guide to enhance lifetime.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(2)
• /
• pp.177-180
• /
• 2001

The quantum effects in the channel of a $\delta$ -doped NMOSFET structures are investigated by solving Schrodinger and Poisson equations self-consistently. According to the scaling of MOSFET structures, electron distributions change by the strong energy quantization. However the presence of a low-doped epitaxial region produces a reduction of the electron effective field for a given charge sheet density and therefore, improves the electron effective mobility. We also focus the quantum-induced threshold voltage shifts, low-field electron effective mobility and gate-to-channel capacitance. The reported results give indications for the fabrication of ultra short MOSFET's.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.200-200
• /
• 2010

이 논문에서는 field-effect mobility를 향상시키기 위해 triple-layer (SiNx/SiO2/SiOxNy stack 구조)를 gate dielectric material 로 LTPS TFTs에 적용하였다. 이는 플라즈마 처리 기법과 적층구조의 효과적인 in-situ 공정을 이용하여 interface trap과 mobile charge를 낮추어 높은 이동도의 결과를 생각하고 실험하였다. 실험은 SiO2 gatedielectric과 triple-gate dielectric의 C-V curve를 1 MHz의 주파수에서 측정하였다. 또한 Transfer characteristics를 single SiO2 gatedielectric과 triple-gate dielectric of SiNx/SiO2/SiOxNy를 STA 장비를 이용해 측정하였다. 위의 측정을 통해 threshold voltage, mobility, subtheshold swing, driving current, ON/OFF current ratio를 비교 분석하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1055-1055
• /
• 2009

The mobility of charge carriers has been investigated in the pristine and phosphorescent materials doped host materials using time-of-flight photoconductivity technique. The field and temperature dependences of the mobility were analyzed with the Gaussian disorder model. Based on these results, we optimized white organic light emitting diodes (WOLEDs) consisting of multi-emitting layers doped with phosphorescent and fluorescent dopants. Especially, we studied the effect of each emitter position and an interlayer on the device characteristics of WOLEDs.

• ETRI Journal
• /
• 제11권2호
• /
• pp.109-119
• /
• 1989

Based on the 2-dimensional charge-control simulation[4], a purely analytical model for MODFET's is proposed. In this model, proper treatment of the diffusion effect in the 2-DEG transport due to the gradual channel opening along the 2-DEG channel was made to explain the enhanced mobility and increased thershold voltage. The channel thickness and gate capacitance are experssed as functions of gate vlotage including subthreshold characteristics of the MODFET's analytically. By introducing the finite channel opening and an effective channel-length modulation, the slope of the saturation region of the I-V curves was modeled. The smooth transition of the I-V curves from linear-to-saturation region of the I-V curves was possible using the continuous Troffimenkoff-type of field-dependent mobility. Furthermore, a correction factor f was introduced to account for the finite transtition section forming between the GCA and the saturated section. This factor removes the large discrepanicies in the saturation region fo the I-V curves presicted by existing 1-dimensional models. The fitting parameters chosen in our model were found to be predictable and vary over relatively small range of values.

• 대한기계학회논문집B
• /
• 제28권5호
• /
• pp.501-509
• /
• 2004

Unipolar diffusion charging of non-spherical particles was investigated for various particle shapes. We researched with TiO$_2$agglomerates produced by the thermal decomposition of titanium tetraisopropoxide (TTIP) vapor. TTIP was converted into TiO$_2$, in the furnace reactor and was subsequently introduced into the sintering furnace. Increasing the temperature in the sintering furnace, aggregates were restructured into higher fractal dimensions. The aggregates were classified according to their mobility using a differential mobility analyzer. The projection area and the mass fractal dimension of particles were measured with an image processing technique performed by using transmission electron microscope (TEM) photograph. The selected aggregates were charged by the indirect photoelectric-charger and the average number of charges per particle was measured by an aerosol electrometer and a condensation particle counter. For the particles of same mobility diameter, our results showed that the particle charge quantity decreases as the sintering temperature increases. This result is understandable because particles with lower fractal dimension have larger capacitance and geometric surface area.

• 한국군사과학기술학회지
• /
• 제13권3호
• /
• pp.343-348
• /
• 2010

Recently, unmanned electric vehicles are increasingly interested among all of the world since they can provide low exhaust gas, high efficiency and high mobility. To exploit their silent maneuver and high mobility, unmanned electric vehicles have been developed since early 1980's for military. However, it is not easy to design and control a power system satisfying operating duration and mobility performance requirements based on various mission profiles for military use under the conditions of limited space and weight. Moreover it is also necessary to prevent over-charge, over-discharge and voltage unbalance between cells of battery to secure high voltage battery which is serially connected with muti-cells. In this paper, we presents power control and optimal management method for the dog-horse robot which adopts a electric power system and suggests a guide-line to manage and control to secure high voltage battery.

• 한국인터넷방송통신학회논문지
• /
• 제21권1호
• /
• pp.175-179
• /
• 2021

최근 1인 가구 비율의 증가로 합리적인 개인 이동수단에 대한 수요가 증가하면서 간편하고, 간결하게 이용할 수 있는 'Personal Mobility'산업이 급성장하였다. 실제로 한국교통연구원의 자료에 따르면 2022년에는 전동킥보드의 수가 20만대로 확대될 것으로 전망되었다. 전기를 동력으로 작동되는 전동킥보드의 특성상 안정적이고, 효율적인 배터리 수급이 가장 기본적이면서도 중요한 이슈가 된다. 최근 전동킥보드를 이용한 사용자의 후기에 따르면 전동킥보드를 이용하려고 하였으나 배터리가 방전상태이거나 배터리 충전 정도가 낮아 이용을 하지 못하는 경우가 종종 발생되고 있는 것을 확인할 수 있다. 이에 본 논문은 전동킥보드의 안정적인 배터리 사용을 위한 태양광 충전시스템을 제안한다. 본 시스템이 적용 될 경우 전동킥보드의 친환경적인 충전 방법이 될 뿐만 아니라 주행 중에도 안정적으로 배터리 수급이 가능할 것으로 예상된다.

• 전자공학회논문지D
• /
• 제35D권4호
• /
• pp.53-60
• /
• 1998

The purpose of this paper is to meausre the electrophotographic characteristics of double-layered organic photoreceptor and to evaluate an application for the laser beam printer drum. The characte carrier generation layer(CGL) of double-layered photoreceptor was fabricated with .tau.-H$_{2}$Pc which has high photosensitivity in the near-infrareed region(thickness is about 0.3.mu.m), and Oxadiazole derivative was chosen as a charge carrier transport layer(CTL) because of its high hole mobility. To observe the electrophotographic characteristics of the photoreceptor, we measured the charge acceptance, dark-decay ratio, residual potential after light irradiation. From the result of this study, proper thickness of CTL was about 10.mu.m. Also it's realized that electrophotographic characteristics of the photoreceptor were depend on the thickness of the CTL and the initial surface potential.

• 반도체디스플레이기술학회지
• /
• 제5권1호
• /
• pp.45-49
• /
• 2006

In this paper, a new method that monitors the quantity of particles using ion-counter in vacuum environment is introduced. In-situ particle monitoring (ISPM) system is composed by Gerdien type ion-counter (house-made), DC power supply and electrometer. The ion-counter applied by positive voltage detects only positive charged particles. Therefore the particles to be detected should be in known charge state for further data analysis. ion-counter is installed at the exhaust line of process equipment where the pressure loss is structurally low. ISPM system performance has been verified with SMPS (Scanning Mobility Particle Sizer) system. The correlation coefficient is above 0.98 at the particle size range of $20{\sim}300nm$ in diameter with identified charge distribution under $0.1{\sim}10.0$ Torr.