• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 춘계 학술논문 발표대회
• /
• pp.18-19
• /
• 2017

In this study, hardening characteristics and microstructure of blast furnace slag-cement mortar replaced alpha-calcium sulfate hemihydrate were analyzed. As a result of replacing alpha-calcium sulfate hemihydrate with 0, 10, 20, 30%, it was confirmed that the initial and final setting times are faster than that of blast furnace slag-cement mortar. The compressive strength of the specimens containing alpha-calcium sulfate hemihydrate decreased in the range of 42 ~ 76% at age 28 days compared with blast furnace slag-cement mortar. In the case of replacing the alpha-calcium sulfate hemihydrate, the shrinkage did not occur more rapidly than the cement mortar, but the slope of the strain curve showed a linear behavior. The results of scanning electron microscopy images analysis showed that the formation of ettringite was increased at alpha-calcium sulfate hemihydrate replaced mortar.

• 한국세라믹학회지
• /
• 제44권9호
• /
• pp.496-501
• /
• 2007

The properties of the polymer-modified mortars are influenced by the polymer film, cement hydrates and the combined structure between the organic and inorganic phases. Also, this quality of polymer modified cement strongly depend on weather condition. To overcome this problem, polymer-modified cement based on rapid setting cement mortars were prepared by varying polymer/cement mass ratio (P/C) with a constant water/cement mass ratio of 0.5. The effect of polymer on the hydration of this polymer cement is studied on different curing temperature. The results showed that the polymer mortar which is modified with rapid setting cement have superior physical strength properties on independent curing temperature. In addition the PIC ratio, the compressive strength, flexural strength, tensile strength and adhesion strength of mortar is enhances and polymer-modified cement based on rapid setting cement is more beneficial to the improvement of the mortar properties in jobsite.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표논문집(II)
• /
• pp.392-397
• /
• 1998

In this paper, the properties of cement mortar used recycled aggregate are analyzed and compared with river and crushed sand mortar. Recycled aggregates are made by crushing wasted concrete had various compressive strength, and test items are the properties of fresh mortar, hardened mortar and durability. According to the experimental results, flow, unitweight, strength and durability of cement mortar used recycled aggregates decrease compared with those of river and crushed sand mortar.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회 논문집(II)
• /
• pp.1133-1138
• /
• 2000

The interface necessarily exists in joints using cement mortar, UP(Unsaturated Polyester : UP) mortar and SBR(SBR-latex) mortar. Characteristics of shear transfer in joint interface consisting of different materials are studied with experimental and analytical methods. The uniaxial compressive shear experiments are accomplished with various angle of inclination (35, 45, 55, 65, 75°), materials of old and new-cast mortar. In this study, The results are as follows ① Mohr-coulomb's slip theory be applied to the interface consisting different materials ② The cohesion of UP mortar is superior to that f cement mortar, SBR mortar.

• 폴리머
• /
• 제34권3호
• /
• pp.247-252
• /
• 2010

본 연구에서는 시멘트 복합체의 단점을 보완하기 위해 유기화합물인 폴리머를 시멘트 모르타르에 혼입하여 폴리머 시멘트 모르타르를 제작하고 이에 대한 인장력과 부착특성을 개선시키고자 하였다. 또한, 폴리머 시멘트 모르타르 내에서 형성되는 폴리머 필름의 인장강도와 유리전이온도가 폴리머 시멘트 모르타르의 인장강도와 부착특성에 미치는 영향을 파악하였다. 본 연구 결과 폴리머 시멘트 모르타르는 보통 시멘트 모르타르에 비해 인장강도의 경우 최대 2배 정도 증진효과를 나타내고 있었으며 부착특성에 있어서도 약 4배 정도의 증진효과가 나타났다.

• Advances in concrete construction
• /
• 제12권6호
• /
• pp.479-490
• /
• 2021

Present research is mainly focused on, microstructural and durability analysis of Graphene Oxide (GO) in Wollastonite (WO) induced cement mortar with silica fume. The study was conducted by evaluating the mechanical properties (compressive and flexural strength), durability properties (water absorption, sorptivity and sulphate resistance) and microstructural analysis by SEM. Cement mortar mix prepared by replacing 10% ordinary portland cement with SF was considered as the control mix. Wollastonite replacement level varied from 0 to 20% by weight of cement. The optimum replacement of wollastonite was found to be 15% and this was followed by four sets of mortar specimens with varying substitution levels of cementitious material with GO at dosage rates of 0.1%, 0.2%, 0.3% and 0.4% by weight. The results indicated that the addition of up to 15%WO and 0.3% GO improves the hydration process and increase the compressive strength and flexural strength of the mortar due to the pore volume reduction, thereby strengthening the mortar mix. The resistance to water penetration and sulphate attack of mortar mixes were generally improved with the dosage of GO in presence of 15% Wollastonite and 10% silica fume content in the mortar mix. Furthermore, FE-SEM test results showed that the WO influences the lattice framework of the cement hydration products increasing the bonding between silica fume particles and cement. The optimum mix containing 0.3% GO with 15% WO replacement exhibited extensive C-S-H formation along with a uniform densified structure indicating that calcium meta-silicate has filled the pores.

• 한국건축시공학회지
• /
• 제21권6호
• /
• pp.529-538
• /
• 2021

본 논문은 발수제 첨가 모르타르의 강도 및 발수성에 미치는 다양한 요인 중에서 발수제 종류 및 잔골재 입도에 대한 영향을 검토하고자 하였다. 그 결과 발수제 첨가 시멘트 모르타르의 압축강도는 무첨가 시멘트 모르타르와 비교하여 감소하였고, 올리고머계 발수제 첨가 모르타르의 압축강도는 모노머계 발수제와 비교하여 높게 나타났다. 또한 잔골재 입도에 따른 시멘트 모르타르 압축강도 영향은 크게 나타나지 않았다. 발수제 첨가 모르타르의 접촉각은 무첨가 모르타르와 비교하여 증가하였고, 올리고머계 발수제보다는 모노머계 발수제가 상대적으로 증가하였다. 또한 연마 전후 접촉각은 잔골재 입도에 따라서 상이한 경향을 보이고 있다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1995년도 봄 학술발표회 논문집
• /
• pp.36-41
• /
• 1995

Recently, as the problems according to the deteriorated structure were gathering sterength, there were required the advent of the high peformance for polymer ceme at compostie in building constrution devision. The polymer cement mortar was developed for improvements of the various problems in ordinary cement mortar. finishing method using the super flowing polymer-based self levelling mortar for concrete slab and floor.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 봄 학술논문 발표대회
• /
• pp.51-52
• /
• 2022

The electro-mechanical impedance(EMI) behavior of piezoelectric sensor embedded in cement mortar was investigated to assess the setting times. EMI signal was continuously measured for 12 hours by the PZT sensor embedded in cement mortar with different ratio of sand. As a result, the setting times by the penetration resistance test were accelerated as the sand ratio increased. However, the setting times by EMI sensing technique were delayed as the sand ratio increased.

• 콘크리트학회논문집
• /
• 제28권6호
• /
• pp.665-672
• /
• 2016

본 연구는 상전이물질이 시멘트 모르타르의 수화특성 및 강도특성에 미치는 영향을 평가하기 위하여 실시되었다. 이를 위하여 바륨 및 스트론튬계 상전이물질을 사용하였으며, 상전이물질 혼입률 1~5%에 대한 실험을 수행하였으며, 시멘트 모르타르 작업성 평가, 간이단열온도상승 실험, 압축 및 휨 강도 평가를 실시하였다. 실험결과 상전이물질의 혼입은 시멘트 모르타르의 수화열 감소에 효과적인 것으로 나타났으며, 바륨 기반 PCM을 사용할 경우 흐름성능이 다소 감소하는 것으로 나타났다. 압축 휨 강도의 경우 상전이물질의 혼입률이 증가함에 따라 감소하는 경향을 나타내었으며, PCM을 사용할 경우 혼입률에 따라 압축강도 발현추이의 변화가 발생하였다. 따라서 본 연구에서는 상전이물질이 혼입률에 따른 압축강도 추정식을 제시하였다.