• 한국결정성장학회지
• /
• 제19권2호
• /
• pp.102-105
• /
• 2009

$BaTiO_3$ 입자 크기가 MLCCs의 절연 특성 및 MLCCs 특성 열화에 미치는 영향을 알아보기 위해 서로 다른 입자를 사용하여 제작한 MLCCs의 가속열화시험을 $150^{\circ}C$, 75 V조건에서 실시하였다. 실험에 사용된 MLCCs는 각각 $0.525{\mu}m$, $0.555{\mu}m$, $0.580{\mu}m$의 입자 크기를 가지는 $BaTiO_3$와 Ni계 전극을 사용하여 상용화된 공정을 통해 제조되었다. 제조된 MLCCs에 대해 정상 유무 확인을 위해 X5R조건 하에서 TCC(Temperature Coefficient of Capacitance) 측정을 통해 유전 변화율에 대해 알아보았다. 세 가지 입자 크기에 따른 절연저항의 거동을 알아보기 위해 BDV(Breakdown Voltage)를 실시하였고, 가속열화시험 후 입자의 크기에 따른 MLCCs 열화의 정도와 원인을 알아보기 위해 XPS(If-ray photoelectron spectroscopy)를 통해 고장분석을 하였다. $BaTiO_3$의 입자 크기가 작을수록 절연파괴저항 및 절연저항 열화에 우수한 특성을 나타내었고, XPS 분석 결과 확인된 NiO peak과 $BaTiO_3$ peak 감소를 통해 MLCCs 열화원인이 유전체의 산소 환원과 환원된 산소와 전극간 반응임을 알 수 있었다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제12권1호
• /
• pp.59-65
• /
• 2012

A study on the electrical characteristic analysis of solar cell diodes under experimental conditions of varying temperature and frequency has been conducted. From the current-voltage (I-V) measurements, at the room temperature, we obtained the ideality factor (n) for Space Charge Region (SCR) and Quasi-Neutral Region (QNR) of 3.02 and 1.76, respectively. Characteristics showed that the value of n (at SCR) decreases with rising temperature and n (at QNR) increases with the same conditions. These are due to not only the sharply increased SCR current flow but the activated carrier recombination in the bulk region caused by defects such as contamination, dangling bonds. In addition, from the I-V measurements implemented to confirm the junction uniformity of cells, the average current dispersion was 40.87% and 10.59% at the region of SCR and QNR, respectively. These phenomena were caused by the pyramidal textured junction structure formed to improve the light absorption on the device's front surface, and these affect to the total diode current flow. These defect and textured junction structure will be causes that solar cell diodes have non-ideal electrical characteristics compared with general p-n junction diodes. Also, through the capacitance-voltage (C-V) measurements under the frequency of 180 kHz, we confirmed that the value of built-in potential is 0.63 V.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 B
• /
• pp.813-815
• /
• 1992

Accurate Capacitance-Voltage characteristics of Metal-Insulator-Semiconductor (MIS) devices in narrow band-gap semiconductors are presented. The unique band structure of narrow band-gap semiconductors is taken into account such as non-parabolicity and degeneracy. Compensated and partially ionized impurities either in the bulk or the space charge region are also considered. HgCdTe is a defect semiconductor, so this approach is very important for characterization and analysis of MIS devices.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.388-388
• /
• 2013

현대 사회에서 고집적 및 고성능의 전자소자의 필요성은 지속적으로 요구되고 있으며, 투명하거나 플렉서블한 특성의 필요성에 따라 이에 대한 기술개발이 이루어지고 있다. 특히, 이러한 특성을 만족하면서 대면적화 및 저온 공정의 특성을 지니는 유기물 반도체가 주목받고 있고, 이를 이용하여 OLED (Organic Light Emitting Diode), OTFT (Organic Thin Film Transistor)와 같은 다양한 유기물 반도체 소자가 개발되고 있다. 대표적인 예로는이 있다. 유기물 반도체 소자의 특성을 이용한 메모리 소자 또한 연구 및 개발이 지속되고 있으며, 유연성과 낮은 공정가격 등의 특성을 가지는 나노 입자들이 기존 Floating Gate의 대체물로 각광받고 있다. 본 논문에서는 MIS (Metal/Insulator/Semiconductor) 구조를 제작하고, Insulator 내부에Core/Shell 구조를 가지는 CdSe/ZnS 나노 입자를 부착하여 메모리 소자의 특성 확인 및 단위 면적당 개수에 따른 특성 변화를 확인하고자 하였다. 합성된 PVP (Poly 4-Vinyl Phenol)를 Insulator 층으로 사용하였으며 단위 면적당 나노 입자의 개수를 조절하여 제작된 MIS 소자를 Capacitance versus Voltage (C-V) 측정을 통하여 변화특성을 확인하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1988년도 추계학술대회 논문집
• /
• pp.79-81
• /
• 1988

The capacitance-voltage (C-V) characteristics of poly-Si gate MOS devices fabricated by Low-Pressure Chemical Vapor Deposition (LPCVD) system have been studied. In the case poly-Si gate, work function difference and surface state charge density was found lower than that of Al gate. This fact was identified from the C-V curves that flatband shift was shown small due to the hydrogen gas diffused into oxide in processing of alloy and the annealing effect in processing of poly-Si deposition.

• 반도체디스플레이기술학회지
• /
• 제20권3호
• /
• pp.103-107
• /
• 2021

In this paper, a capacitive water level sensor for boilers was developed. In order to accurately monitor the water level in a high-temperature boiler that generates a lot of precipitates, the occurrence of precipitates on the surface of the water level sensor should be small, and a sensor capable of measuring even if the sensor surface is somewhat contaminated is required. The capacitive water level sensor has a structure in which one of the two electrodes is insulated with Teflon coating, and the stainless steel package of the water level sensor is brought into contact with the water tank so that the entire water tank becomes another electrode of the water level sensor. A C-V converter that converts the capacitance change of the capacitive water level sensor into a voltage change was developed and integrated with the water level sensor to minimize noise. The performance of the developed capacitive water level sensor was evaluated through measurement.

• 한국재료학회지
• /
• 제4권5호
• /
• pp.510-515
• /
• 1994

플라즈마 화학 증착법으로 (100)p-type Si wafer위에 $Y_2O_3$-Stabilzed $ZrO_2$박막을 증착하였다. 반응 기체로는 zirconium triflouracethylacetonate[Zr(tfacac) $[Zr(tfacac)_4]$, tri(2.2.6.6 tetramethy1-3, 5-heptanate) yttrium $[Y(DPM)_3]$과 oxygen gas를 사용하였다. X-ray diffraction(XRD)과 fourier Particle induced x-ray emission(PIXE)을 통하여 $Y(DPM)_3$ bubbling temperature가 $160^{\circ}C, 165^{\circ}C, 170^{\circ}C$일때 $Y_2O_3$함량이 12.1mo1%, 20.4mol%, 31.6mol%임을 알 수 있었다. C-V측정에서 $Y(DPM)_3$ bubbling temperature가 증가함에 따라 flat band voltage가 더욱더 음의 방향으로 이동하였다.

• 한국전기전자재료학회논문지
• /
• 제24권12호
• /
• pp.939-943
• /
• 2011

In this paper, reliability of the two sandwiched MIM capacitors of $Al_2O_3-HfO_2-Al_2O_3$ (AHA) and $SiO_2-HfO_2-SiO_2$ (SHS) with hafnium-based dielectrics was analyzed using two kinds of voltage stress; DC and AC voltage stresses. Two MIM capacitors have high capacitance density (8.1 fF/${\mu}m^2$ and 5.2 fF/${\mu}m^2$) over the entire frequency range and low leakage current density of ~1 nA/$cm^2$ at room temperature and 1 V. The charge trapping in the dielectric shows that the relative variation of capacitance (${\Delta}C/C_0$) increases and the variation of voltage linearity (${\alpha}$/${\alpha}_0$) gradually decreases with stress-time under two types of voltage stress. It is also shown that DC voltage stress induced greater variation of capacitance density and voltage linearity than AC voltage stress.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 추계학술발표대회
• /
• pp.14-14
• /
• 2011

AlInN has been studied extensively over the past few years due to its interesting material properties that are not present in other ternary nitrides. However, basic material study of AlInN has not been reported as much compared to device applications due to the difficulty in the growth. We have performed the material studies from various aspects. A secondary ion mass spectrometry (SIMS) has shown high oxygen content above $1{\times}10^{18}\;cm^{-3}$ with its insensitivity to the growth conditions. While the free carrier concentration observed by the capacitance-voltage (C-V) measurements was about $3{\times}10^{17}\;cm^{-3}$, the activation energy measured by temperature dependent C-V was only about 4 meV. Si doped AlInN (Si level ${\sim}2{\times}10^{18}\;cm^{-3}$) showed almost no carrier freeze-out at carrier density of $1{\times}10^{18}\;cm^{-3}$. More studies were carried out with a transmission electron microscopy, time-resolved photoluminescence and other analytical techniques to understand the results from SIMS and C-V studies. In this report, we will discuss the possible correlations between the abnormal characteristics in AlInN.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 추계학술대회 논문집
• /
• pp.71-74
• /
• 1996

Ta$_2$O$_{5}$ film ale recognized as promising capacitor dielectric for future DRAM\`s. The electrical properties of Ta$_2$O$_{5}$films greatly depend on the heating condition. In the practical fabrication process, several annealing process, such as the annealing of Al in H$_2$(about 40$0^{\circ}C$) and reflow of BPSG (borophosphosilicate glass) film in $N_2$(about 80$0^{\circ}C$), exist after deposition of Ta$_2$O$_{5}$ film. In this paper, we describe the temperature effect on the electrical properties of W/Ta$_2$O$_{5}$/Si structure. The thin film of Ta$_2$O$_{5}$ and tungsten have been deposited on p-si(100) wafer using the sputtering system. The heating temperature was varied from 500 to 90$0^{\circ}C$ in $N_2$for 30min and The degree of temperature is 100\`C. In a log(J/E$^2$) Vs 1/E plot of typical I-V data, we find a linear relationship for the temperature of 500, $600^{\circ}C$ and as deposition. This could indicate Fowler-Nordheim tunneling as the dominant mode of current transports. However, we can not find a linear relationship for the temperature above $700^{\circ}C$. This could not indicate Fowler-Nordheim tunneling as the dominant mode of current transport. The high frequency (1MHz) capacitance-voltage (C-V) of W/Ta$_2$O$_{5}$/Si Capacitor were investigated on the basis of shift in the threshold voltage and dielectric constant. The magnitude of the threshold voltage and dielectric constant depends on the heating temperature, and increases with heating temperature.temperature.