• Restorative Dentistry and Endodontics
• /
• v.23 no.1
• /
• pp.54-67
• /
• 1998

The purposes of this study were to evaluate the efficiency of dentin cutting and root-end cavity preparation, and to determine the incidence of tooth crack when root-end retrograde cavity preparation was done with. ultrasonic diamond instruments. To evaluate the efficiency of dentin cutting, ultrasonic diamond and stainless steel instruments were applied to 20 exposed bovine dentin surfaces perpendicularly or parallely at the low, and medium power settings for 1 minute ($Miniendo^{TM}$, EIE, CA, U.S.A.). The resultant cavity depth was measured. To evaluate the efficiency of cavity preparation and to investigate the incidence of tooth crack, 165 mesiobuccal, distobuccal and palatal root-ends of extracted human maxillary first molars were resected by 3 mm perpendicularly to the long axis of tooth using a slow speed diamond saw after root canal preparation and filling. Retrocavities were prepared using a ultrasonic diamond instrument or a stainless steel one of the low- or medium power settings of 2 or 6. Time consumed and the number of strokes used for the cavity preparation were measured and the incidence of tooth cracks was evaluated under a stereomicroscope. The results were as follows: Both at the low and medium power settings, and both with perpendicularly- and parallely applied tips to dentin, diamond instruments showed higher dentin cutting efficiency than stainless steel ones did (p<0.01). When tips were applied to dentin perpendicularly, both diamond instrument and stainless steel one showed higher cutting efficiency with medium power setting than with low power one (p<0.01). Both at the low- and medium power settings, both diamond instrument and stainless steel one showed higher cutting efficiency when tips were applied perpendicularly to dentin surface than applied parallely (p<0.01). At the medium power setting, the number of stroke and time consumed were less with diamond instrument than with stainless steel one (p<0.05) for the retrograde cavity preparation. At the low power setting, diamond instrument induced less tooth cracks than stainless steel one did (p<0.01).

• Restorative Dentistry and Endodontics
• /
• v.34 no.4
• /
• pp.324-332
• /
• 2009

The purpose of this study was to investigate the effect of rigidity of post core systems on stress distribution by the theoretical technique, finite element stress-analysis method. Three-dimensional finite element models simulating an endodontically treated maxillary central incisor restored with a zirconia ceramic crown were prepared and 1.5 mm ferrule height was provided. Each model contained cortical bone, trabecular bone, periodontal ligament, 4 mm apical root canal filling, and post-and-core. Six combinations of three parallel type post (zirconia ceramic, glass fiber, and stainless steel) and two core (Paracore and Tetric ceram) materials were evaluated, respectively. A 50 N static occlusal load was applied to the palatal surface of the crown with a $60^{\circ}$angle to the long axis of the tooth. The differences in stress transfer characteristics of the models were analyzed. von Mises stresses were chosen for presentation of results and maximum displacement and hydrostatic pressure were also calculated. An increase of the elastic modulus of the post material increased the stress, but shifted the maximum stress location from the dentin surface to the post material. Buccal side of cervical region (junction of core and crown) of the glass fiber post restored tooth was subjected to the highest stress concentration. Maximum von Mises stress in the remaining radicular tooth structure for low elastic modulus resin core (29.21 MPa) was slightly higher than that for high elastic modulus resin core (29.14 MPa) in case of glass fiber post. Maximum displacement of glass fiber post restored tooth was higher than that of zirconia ceramic or stainless steel post restored tooth.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.30 no.3
• /
• pp.111-120
• /
• 2012

This study regards a series of achievement on Wonlim(Garden) Cultural Properties Excavation Project, led by field of landscape architecture. It will mainly describe excavation results of Gwiam(龜巖: Turtle rock) and historical value of it in terms of Nakseojae(樂書齋) restoration in Bogil-do Yun,Seondo Wonlim(Scenic Sites, No.34). Gwiam(Turtle rock) was found 14.6m apart from the north of Nakseojae, and it covered with 10~15m topsoil tilted toward Nakseojae, The size of Gwiam, which was Granite, was 360cm length, 270cm width, 95cm high. The Edge of Gwiam's North west part was of triangular shape forming Turtle head. The back of the Turtle head was form of Tortoise-shell because of wide backboard with both side groove. The southeast part of Gwiam projected was Turtle's tail. This Granite was obvious Turtle shape artificially made, and there are less likely to relocate from place to place. This Turtle-shaped Gwiam is important landmark for Nakseojae, which is one of the four spiritual creatures written in Bogildoji(甫吉島識) and Gosanyugo(孤山遺稿) by Yunwi. According to Bogildoji, it is estimated that Gwiam were on the axis with Soeunbyung(小隱屛), Nakseojae and was buried when Yiguan(Gosan's grandson) reconstructed a building. Also, it was place for enjoying the moon. But, Even after three times excavation in Nakseojae, there was no way to identify further information regarding Gwiam, so it was a matter of mystification. As a result of this study, Gwiam is laid bare to light in at least 260 years, so it is good example for boosting importance of landscape architecture field and restoring Nakseojae. Furthermore, firm base-soil was discovered in 135m high Rock Mass below, so natural ground of Nakseojae can be estimated by this basis. To be conclusion, Preservation Process for Gwiam and Estimation Space through interpretation of four spiritual creatures(四靈) in Gosan's Poetry should be continue.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.28 no.2
• /
• pp.109-117
• /
• 2010

This study conducts a case analysis based on the Olympic Forest Park in Beijing, which is specially designed for the 2008 Beijing Olympic Games. The construction of the Olympic Forest Park not only comprises the design philosophy of city parks and forest parks, but also applies Chinese traditional design elements. This study, first, researches on the design concepts of city parks in the context of traditional landscape architecture elements from both physical and cultural perspectives. The author studies the related materials including the"General Introduction of the Beijing Olympic Forest Park Landscape Plan", and employs the approaches of site investigation and user survey and interview, to analyze the cognition and preference degree of the various traditional design elements displayed in the Olympic Forest Park. To quantize the survey data on the Olympic Forest Park, this study uses the spss(v17.0) software to run a frequency analysis and presents detailed demographic, frequencies and means analyses. The author then reaches the conclusion on the preference degree of the various Chinese traditional design elements in the Olympic Forest Park. According to the analysis result, the elements that appear with the highest frequencies are mountains and waters, traditional garden plants and artistic conception. The most favorable elements are in sequence traditional garden architecture, traditional garden philosophical thinking and artistic conception. The Olympic Forest Park in Beijing is constructed on the basis of multiple design elements, comprising Chinese traditional design elements and the historical axis. As an exemplification of contemporary city park that reflects the variation of age and development of society, the Olympic Forest Park offers the reference for the selection of traditional design elements in the future schemes of city parks. However, due to the difficulty in gathering materials about the Forest Park and the limitations on the location and time constrain of the survey, there exists lack of sufficiency that could be improved in the future.

• Journal of the Korean Arthroscopy Society
• /
• v.8 no.2
• /
• pp.75-81
• /
• 2004

Purpose: Recent development and advances in arthroscopic surgical techniques for Anterior Cruciate Ligament(ACL) reconstruction have led to the ideal location for the etric point from 10 o'clock (in right knee) and 13:30 (in left knee) to 10:30 (in right knee) and 14 o'clock (in left knee) in the frontal plane. This study was performed to compare operative methods and the radiologic results of femoral tunnels made through the tibial tunnel(trans-tibial approach) and the anteromedial portal. Material and Methods: From January 2003 to May 2004, one-hundred reconstructions of anterior cruciate ligament were performed. Group I (femoral tunnel through tibial tunnel) was composed of 50 cases and group ll (femoral tunnel through anteromedial portal) was consisted of 50 cases. The study was performed to compare the radiographic results of femoral tunnels made through the tibial tunnel and the anteromedial portal and operative methods. Results: In operative methods at Group II, femoral tunnel was made more easily at isometric point than Group I, a good visual field was achived because 100$^{\circ}$ flxion of knee, they can be reduced risk of posterior cortical breakage and tunnel-graft mismatching and decreased divergence of femoral interference screw in radiology (P<0.05). The angle between femoral tunnel and longitudinal axis of ACL wae increased at Group ll. Conclusion: Aanteromedial portal technique was more useful in ACL reconstruction for femoral tunnel toward 10 o'clock to10:30(in right) or 1:30 to 2 o'clock(in left).

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.04a
• /
• pp.1-2
• /
• 2011

Hybrid rockets have lately attracted attention as a strong candidate of small, low cost, safe and reliable launch vehicles. A significant topic is that the first commercially sponsored space ship, SpaceShipOne vehicle chose a hybrid rocket. The main factors for the choice were safety of operation, system cost, quick turnaround, and thrust termination. In Japan, five universities including Hokkaido University and three private companies organized "Hybrid Rocket Research Group" from 1998 to 2002. Their main purpose was to downsize the cost and scale of rocket experiments. In 2002, UNISEC (University Space Engineering Consortium) and HASTIC (Hokkaido Aerospace Science and Technology Incubation Center) took over the educational and R&D rocket activities respectively and the research group dissolved. In 2008, JAXA/ISAS and eleven universities formed "Hybrid Rocket Research Working Group" as a subcommittee of the Steering Committee for Space Engineering in ISAS. Their goal is to demonstrate technical feasibility of lowcost and high frequency launches of nano/micro satellites into sun-synchronous orbits. Hybrid rockets use a combination of solid and liquid propellants. Usually the fuel is in a solid phase. A serious problem of hybrid rockets is the low regression rate of the solid fuel. In single port hybrids the low regression rate below 1 mm/s causes large L/D exceeding a hundred and small fuel loading ratio falling below 0.3. Multi-port hybrids are a typical solution to solve this problem. However, this solution is not the mainstream in Japan. Another approach is to use high regression rate fuels. For example, a fuel regression rate of 4 mm/s decreases L/D to around 10 and increases the loading ratio to around 0.75. Liquefying fuels such as paraffins are strong candidates for high regression fuels and subject of active research in Japan too. Nakagawa et al. in Tokai University employed EVA (Ethylene Vinyl Acetate) to modify viscosity of paraffin based fuels and investigated the effect of viscosity on regression rates. Wada et al. in Akita University employed LTP (Low melting ThermoPlastic) as another candidate of liquefying fuels and demonstrated high regression rates comparable to paraffin fuels. Hori et al. in JAXA/ISAS employed glycidylazide-poly(ethylene glycol) (GAP-PEG) copolymers as high regression rate fuels and modified the combustion characteristics by changing the PEG mixing ratio. Regression rate improvement by changing internal ballistics is another stream of research. The author proposed a new fuel configuration named "CAMUI" in 1998. CAMUI comes from an abbreviation of "cascaded multistage impinging-jet" meaning the distinctive flow field. A CAMUI type fuel grain consists of several cylindrical fuel blocks with two ports in axial direction. The port alignment shifts 90 degrees with each other to make jets out of ports impinge on the upstream end face of the downstream fuel block, resulting in intense heat transfer to the fuel. Yuasa et al. in Tokyo Metropolitan University employed swirling injection method and improved regression rates more than three times higher. However, regression rate distribution along the axis is not uniform due to the decay of the swirl strength. Aso et al. in Kyushu University employed multi-swirl injection to solve this problem. Combinations of swirling injection and paraffin based fuel have been tried and some results show very high regression rates exceeding ten times of conventional one. High fuel regression rates by new fuel, new internal ballistics, or combination of them require faster fuel-oxidizer mixing to maintain combustion efficiency. Nakagawa et al. succeeded to improve combustion efficiency of a paraffin-based fuel from 77% to 96% by a baffle plate. Another effective approach some researchers are trying is to use an aft-chamber to increase residence time. Better understanding of the new flow fields is necessary to reveal basic mechanisms of regression enhancement. Yuasa et al. visualized the combustion field in a swirling injection type motor. Nakagawa et al. observed boundary layer combustion of wax-based fuels. To understand detailed flow structures in swirling flow type hybrids, Sawada et al. (Tohoku Univ.), Teramoto et al. (Univ. of Tokyo), Shimada et al. (ISAS), and Tsuboi et al. (Kyushu Inst. Tech.) are trying to simulate the flow field numerically. Main challenges are turbulent reaction, stiffness due to low Mach number flow, fuel regression model, and other non-steady phenomena. Oshima et al. in Hokkaido University simulated CAMUI type flow fields and discussed correspondence relation between regression distribution of a burning surface and the vortex structure over the surface.

• Korean Journal of Heritage: History & Science
• /
• v.54 no.4
• /
• pp.174-191
• /
• 2021

Gangdo (江都), a reproduction of Gaegyeong, was the capital of Goryeo for 39 years. However, due to the urgent wartime situation of the Mongol invasion and the geographical features of Ganghwa Island, the castle system and palace layout were somewhat different from those of Gaegyeong. Gangdo's castle can be understood as a triple castle system consisting of outer castle, middle castle, and inner castle. First, the outer castle was the first to be completed, and it was built at the forefront to prevent the Mongol army from invading in the first place. It is presumed that the section was between Huamdon and Hwadodon in the outer castle during the Joseon Dynasty. The middle castle can be seen as the present 'Middle Castle', a castle built of earth on the outskirts of the Ganghwa-mountain Castle. Considering the sophistication and robustness of the construction method confirmed in the archaeological research, this castle is thought to have been built under a meticulous plan. In other words, as the capital city, it was completed 'at last' as recorded in the Koryo History, after a long 18-year construction process to protect palaces, government offices, and private houses. The inner castle was a castle with the character of a palace. This corresponds to the Old Castle of Ganghwabu (江華府) during the Joseon Dynasty, and it almost coincided with the scale of the composition of Gaegyeong's palace castle. It was a complex functional space, featuring the integration of the palace and the imperial castle, where the main government offices and ancillary facilities, including the palace, were located. Based on the documentary record that these palaces were similar to Gaegyeong's palace, the palace map was overlapped with that of Gaegyeong. The central axis of the building from Seungpyeongmun (昇平門) to Seongyeongjeon (宣慶殿) coincided with Kim Sangyongsunjeol Monument in Ganghwa- Goryeo Palace. Therefore, it seems that the palace of Gangdo had the same basic structure as that of Gaegyeong. However, the inner palace and annexed buildings must have been arranged in consideration of the topographical conditions of Ganghwa, and this is estimated to be the Gunggol area in Gwancheong-ri.

• Korean Journal of Environment and Ecology
• /
• v.35 no.2
• /
• pp.164-180
• /
• 2021

Plants Social Network(PSN) analysis combines the plant sociological method and the social network analysis to understand plant society focusing on environmental-to-plant and plant-to-plant relationships. PSN is at an early stage of research and require comparing plant society analyses in various environments and existing interspecies binding analysis. This study conducted a vegetation structural analysis of Mudeungsan National Park and compared the existing interspecies connection analysis with the PSN. A total of 60 plots were established for a survey on the Old Trail. The TWINSPAN and DCA analysis showed that the 60 survey plots were divided into the Quercus serrata-Pinus densiflora community (Community I) and the Quercus mongolica community (Community II) based on an altitude of 800 meters. We performed the interspecies correlation with more than 30% emergence frequency and the DCA analysis and compared the results with a focus on the major species in each colony. The results showed that Quercus serrata had a correlation of -0.450^** and -0.375^** with Pinus densiflora and Quercus mongolica, respectively. The DCA analysis also confirmed that Quercus serrata was located close to Pinus densiflora and far from Quercus mongolica along one axis. For the PSN analysis of PSN, 40 survey plots were added to investigate the species appearing in a total of 100 survey plots. The network structural analysis showed 378 links and a species having an average of 6 interspecies bindings. The density was 0.097, the diameter was 7, and the average path distance was 2.788, similar to the PSN analysis results of the Busan Metropolitan City. The plant social network analysis showed similar results to the existing interspecies combination analysis, enabling analyzing more data than the existing methods and observing the structure of plant society.

• (The) Research of the performance art and culture
• /
• no.36
• /
• pp.505-530
• /
• 2018

The purpose of this study is to examine the meaning of learning methods for education to transmit the items designated as intangible cultural heritages focusing on Seoul-gut. Recently, as the Act on the Preservation and Promotion of Intangible Cultural Heritages was promulgated, 'the archetype' instead of 'the prototype' has become highlighted as a crucial axis for transmission. Although there are some controversies over the definition of the archetype among scholars, it is now possible for transmitters to make use of transformations rather freely being freed from strict orientation to the prototype to follow some fixed frame. Examining learning methods used in education to transmit mudang-gut, one of the items designated as intangible cultural heritages, however, this author has found that the prototype is still emphasized or in the center of learning instead. Presenting learning methods employed for Hwanghaedopyeongsansonoreum-gut of a national intangible cultural heritage, Namijanggunsadang-gut of Seoul Special City's intangible cultural heritage, and Bonghwasandodang-gut as examples, this researcher intends to reveal the reality. In the recent situation that education centering around academies is being widely spread to transmit mudang-gut, setting forth the designation of some of the items as intangible cultural heritages, they are publishing articles on newspaper as an advertisement to encourage learning about mudang-gut. Responding to the advertisement, there are more and more shamans intending to learn mudang-gut coming to the society for preserving items designated as intangible cultural heritages. They can, of course, perform mudang-gut on their own but come to learn it as there is no fixed or definite system for it. Even though the concept of the archetype was introduced, as now it is possible to learn the fixed frame through learning about the prototype regarding the item of mudang-gut as an intangible cultural heritage, those involved in shamanism are coming to it more and more. As transmitting the prototype rather deteriorated the liveliness of gut, those involved in shamanism are coming to it to learn about gut thinking that it is where they can learn the basic frame and also acquire more detailed knowledge about shamanism. Therefore, it is needed for the item of mudang-gut designated as an intangible cultural heritage to accept the aspects of change and develop new methods of education to transmit intangible cultural heritages.

• Journal of Korean Philosophical Society
• /
• no.123
• /
• pp.137-185
• /
• 2018

This article aims to deconstruct the mechanism of male domination that constantly reproduces the hegemonic class of men. In order to overcome misogyny, we should no longer deny the ontological dimension of the reality of women's oppressions and the pre-eminence of the material condition of women's existence. In addition, the possibility of the category of women as a modality of resistance should be taken into consideration. First, I will highlight the correlation between penis and phallus according to which the phallus refers to the penis which is malleable and fragile and which disappears without being castrated by the external factor. From here we could deduce the fragility and imperfection, the non-absoluteness of the phallic order. Secondly, I will analyze the mechanism of penis-narcissism, which is the modality of the constitution of the individual identity of man. The penis is not only a physiological organ, but a site of self-estimation and the validity of the succession of power and authority of the father's law. With this penis-narcissism, man is constituted as a hegemonic body that can let itself go without worrying about the reactions of others. Thirdly, I will focus on the mechanism of the penis-cartel which is the modality of the formation of the collective identity. The penis-cartel is reinforced by the mutual affirmation of the superiority of men among themselves, but also by the permission and the tacit agreement of their absurdity and lack of rationality and corruption. Because the privilege of men is not monopolized by a small part of the elite, but is consciously and unconsciously shared by all men who are part of the hegemonic and collective category. In order to deconstruct the penis-narcissism and the penis-cartel, it is necessary to demonstrate that the penis is not a self-sufficient body, nor a closed and impermeable body, but that it is a porous body where the organ serves both ejaculation and urinary ejection. The penis is a porous body that is at once the site of sublimity and degradation, purity and impurity. In addition, the penis is no longer an all-powerful and aggressive organ, but it is a malleable and fluid flesh that constantly changes its shape. Linked to a phallus-organ that is the notion of Jacques-Alain Miller, it is a site of deficiency and vulnerability that is not the axis of the penis-cartel. It is through the notion of the double porosity of the penis and the phenomenology of the flesh of the penis, I try to provide the modality of undoing the reproductive mechanism of predatory masculinity. Because this would be an effective strategy to overcome misogyny.