• IE interfaces
• /
• v.23 no.1
• /
• pp.58-67
• /
• 2010

The purpose of this paper is to present the development processes of the assembly line tester of power transmission for lift truck. Because power transmission is most important part of lift truck, all assembled powertrain parts must be inspected for operational defects, pressures and RPM. Developed assembly line tester is designed to take about 25 minutes for inspecting each assembled power transmission and located it at the end of assembled line. The assembly line no-load tester consists of three parts: (1) the driving hardware part; for installing and operating the transmission. (2) control PCB part; send data from sensors to a computer and control driving part, (3) operation software of no-load tester; for an automatic inspection or manual inspection, for database management and printing transcripts.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.6
• /
• pp.45-54
• /
• 2004

Usually, according as accumulation degree of semi-conductor element increases, dynamic mistake test time increases sharply, and use of pattern generator is essential at manufacturing process to solve these problem. In this paper, we designed the PLD(Programmable Logic Device) circuit of pattern generator to examine dynamic mistake of semi-conductor element. Such all item got result that is worth verified action of return trip and function through simulation, and satisfy.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.6 no.1
• /
• pp.193-203
• /
• 2002

The results of an experimental study on Saemangeum dredged sands are presented. Undrained triaxial compression tests were performed with there different initial relative densities, namely 18, 34, and 50%, intend to evaluate undrained Behavior. All undrained triaxial compression tests were performed under static loading conditions. Undrained triaxial compression tests were exhibited complete static liquefaction, zero effective confining pressure and zero stress difference at lower confining pressures. As confining pressures were increased, the effective stress paths indicated increasing resistance to static liquefaction by showing increasing dilatant tendencies. The fines and larger particles create a particle structure with high compressibility at lower confining pressure. The effect of increasing relative density was to increase the resistance of the sand against static liquefaction by making the sand more dilatant.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.2 no.2
• /
• pp.185-194
• /
• 1998

This paper shows a case study on quality confirmation and maintenance monitoring of the tunnel underpassing the Han River. First of all, when it comes to the quality confirmation, soil investigation techniques and shotcrete core test will be improved. On the construction stages, quality control procedures are needed. Second, on the maintenance monitoring, it is the main tool to control stability and safety of the tunnel structures throughout the construction period. On the geotechnical monitoring instrumentation, some considerations such as installation of monitoring sections in time, immediate base readings, adequate reading frequency, etc - shall be improved.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.2 no.2
• /
• pp.177-184
• /
• 1998

The equation of motion on the vehicle-bridge system is established as the simultaneous equations which are combined the equation of vehicle and bridge by the interaction elements. A vehicle element is modeled as lumped masses supported by springs and dashpots, and a bridge element with pavement roughness is modeled as beam elements. An interaction element is defined to consist of a bridge element and the suspension units of the vehicle resting on the element. By the dynamic condensation method, the degrees of the freedom are eliminated, and compared with all the degrees of freedom on the bridge, the efforts of calculation is decreased. Thus, although a very small computational error is occured, the present technique appears to be computationally more efficient. It is particularly suitable for the simulation of bridges with a series of vehicles moving on the deck.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.3
• /
• pp.210-220
• /
• 2003

This work presents a method of point to surface assignment fur 3D metrology of solder pastes on PCB. A bounding box enclosing the solder paste tightly on all sides is introduced to avoid incorrect assignment. The shape of bounding box fur solder paste brick is variable according to geometry of measured points. The surface geometry of bounding box is obtained by using five peaks selected in the histogram of normalized gradient vectors. By using the bounding box enclosing the solder pastes, the task of point-to-surface assignment has been successfully conducted, then geometrical features are obtained through the task of surface fitting.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.8 no.1
• /
• pp.121-128
• /
• 2004

This study aims to attain the basic data needed for the adaptation and application of polymer cement concrete as a new construction material by reviewing the various physical characteristics of polymer cement concrete following the changes in polymer type. The research found that cement concrete mixed with polymer, while it had some variation, had excellent qualities in all of compressive strength, tensile strength, water absorption, weight reducing ratio, and resistance of freezing and thawing.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2004.02a
• /
• pp.17-25
• /
• 2004

During the past few years, advances have been made in both in X-ray tube and detector technologies. The field of microfocus radioscopy has been established as an important testing process and has expanded into many new industrial applications that require quality control or process optimization. The first nanofocus and multifocus X-ray systems have become available with a focal spot of .5 micron. In the existing range of microfocus X-ray tubes, further improvements have been achieved as well, such as increased long term stability of intensity position constancy. Software, image processing and manipulation techniques have all progressed as well, allowing X-ray to become a formidable non-destructive inspection method for manufacturers in virtually every industry, especially those involved with Electronic Packaging and SMT.

• Korea Trade Review
• /
• v.47 no.5
• /
• pp.95-113
• /
• 2022

Tariffs on pharmaceuticals are generally low, but the time-consuming and costly licensing procedures of importing countries may act as barriers to trade. Accordingly, in terms of improving export competitiveness through cost reduction of exporting countries and improving public health for importing countries, international regulatory collaboration is effective for both countries. However, little is known about the impact of cross-border cooperation in pharmaceutical regulation on international trade. This study empirically analyzed the effect of cross-border regulatory collaboration on pharmaceutical trade using the gravity model. It was confirmed that the regulatory collaboration measures had a trade promotion effect in all drugs(HS29+HS30), finished drugs (HS30), and vaccines (HS300220). This study is meaningful in that it empirically analyzed with the consideration of the reference pharmacopoeia, safety and effectiveness in addition to the GMP inspection used in the previous study.

• Journal of Radiation Industry
• /
• v.18 no.1
• /
• pp.79-87
• /
• 2024

In a previous study, the suitability for use of inspection equipment was evaluated at temperatures outside the quality assurance range. The quality assurance operating temperature of the safeguards equipment is 0~+40℃, and previous studies have confirmed the performance of the safeguards equipment for temperatures ranging from -40~+70℃. The scintillator-based verification equipment showed a shift in the centroid channel and a change in the count rate in all temperature ranges, and the semiconductor-based safeguards equipment generated Leakage Current and equipment failure. In this study, a retrofit was performed applying a vacuum housing to the safeguards equipment (Inspector-2000-based inspection equipment), and performance evaluation was performed at a low temperature and snowy site, and it was confirmed that the same performance was observed as the measurement results at room temperature.