Browse > Article

Development of the Assembly Line Tester of Power Transmission for Lift Truck  

Jang, Kyoung-Yeol (R&D Center, Wooyoung Hydraulics Corporation)
Yoo, Woo-Sik (Department of Industrial and Management Engineering, University of Incheon)
Publication Information
IE interfaces / v.23, no.1, 2010 , pp. 58-67 More about this Journal
Abstract
The purpose of this paper is to present the development processes of the assembly line tester of power transmission for lift truck. Because power transmission is most important part of lift truck, all assembled powertrain parts must be inspected for operational defects, pressures and RPM. Developed assembly line tester is designed to take about 25 minutes for inspecting each assembled power transmission and located it at the end of assembled line. The assembly line no-load tester consists of three parts: (1) the driving hardware part; for installing and operating the transmission. (2) control PCB part; send data from sensors to a computer and control driving part, (3) operation software of no-load tester; for an automatic inspection or manual inspection, for database management and printing transcripts.
Keywords
assembly line tester; lift truck; power transmission system; power shift drive axle;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 Park, S. H. (2005), Design of experiments, Minyeongsa, Seoul, Korea.
2 Kim, O. S. (1998), No-load actuation Test of Hoist Cylinder using Dump Truck, KSPSE Fall Conference, 232-235.
3 Park, H. S., Bae, H. J., Lee, S. J., Lee, C. K., and Kim, Y. H. (2005), An Influence of Frictional Factors on the Friction Characteristics of Automobile Transmission Gear Materials by using Design of Experiment, Journal of the KSTLE, 21(2), 93-99.   과학기술학회마을
4 Joh, W. S. and Kim, K. H. (1997), Development of Software for the Measurement of Fatigue Limit of Automobile Rear Axle, KSAE Spring Conference, 557-562.
5 Jang, K. Y., Pang, J. S., and Yoo, S. K. (2007), A case study on development of the power transmission system for lift truck, KIIE Fall Conference.
6 Jang, K. Y., Pang, J. S., and Yoo, S. K. (2009), A Study on the design and development of the power transmission system for lift truck, Journal of Society of Korea Industrial and Systems Engineering, 32(1), 34-43.   과학기술학회마을
7 Song, H. L. and Kim. H. S. (1997), A Study on Multi Pass Transmission System for a Flywheel Hybrid Vehicle, Transactions of the KSAE, 5(3), 106-116.
8 Lee, W. G. (1996), The principles of statistics, Yulgok publishing co., Seoul, Korea.