• Korean Journal of Agricultural and Forest Meteorology
• /
• v.3 no.4
• /
• pp.215-219
• /
• 2001

Land surface parameterization schemes for atmospheric models as well as decision support tools for ecosystem management require a frequent updating of land cover classification data for regional to global scales. Rice paddies have not been treated independently from other agricultural land classes in many classification systems, despite their atmospheric and ecological significance. A simple but improved method over conventional land cover classification schemes for rice paddy is suggested. Normalized difference vegetation index (NDVI) was calculated for the land area of South Korea at a 1km by 1 km resolution from the visible and the near-infrared channel reflectances of NOAA-AVHRR (Advanced Very High Resolution Radiometer). Monthly composite images of daily maximum NDVI were prepared for May and August, and used to classify 4 major land cover classes : urban, farmland, forests and water body. Among the pixels classified as "forests" in August, those classified as "water body" in May were assigned a "rice paddy" class. The distribution pattern of "rice paddy" pixels was very similar to the reported rice acreage of 1,455 Myons, which is the smallest administrative land unit in Korea. The correlation coefficient between the estimated and the reported acreage of Myons was 0.7, while 0.5 was calculated from the USGS classification.calculated from the USGS classification.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.6 no.2
• /
• pp.85-93
• /
• 2004

In recent years, technology has advanced so much, especially in the developed world, such that its application in development activities may be lagging behind. The lag between technological advances and its application affects agrometeorological science as well. This paper discusses technological advances that may be better used to communicate agrometeorological information. It is important to bear in mind that technological advances are only channels of communication that may be used to speed up the transference of information from the source to the user. The paper begins with a review of the definitions of 'communication' to put the discussion into context. After reviewing several papers, in simple terms, communication can be defined as the sharing of meaning. The paper also looks at operational communications channels and comes to a conclusion that operational communications channels are pretty much universal irrespective of the development level of a country, although some are more easily accessible in some parts of the world than others. The common communications channels include: newspapers, farming papers, radio, television, fax, email, mobile phones (SMS) and Internet web sites. As part of technological advances, mobile phones are becoming increasingly useful all over the world. In order to make better use of this technology, it is important far those that will use this technology to understand how the technology works, not necessarily in detail, but to be able to operate the technology and obtain the data they need. When it comes to constraints, communication of agrometeorological information requires a substantial amount of resources and it is generally expensive especially when sophisticated models must be operated.

• Journal of Animal Science and Technology
• /
• v.51 no.2
• /
• pp.97-104
• /
• 2009

Complement of test standard, evaluation methods and models are needed to improve national competitiveness and to exchange superior genetic resources through the comparison of genetic evaluation score among nations in dairy cattle. Therefore, this study was conducted for the application of international standard to Korea considering domestic circumstance by changing linear-classification test score system of 50 classes which is currently used in Korea to system of 9 classes which is used in advanced nations of dairy. 15,230 of holstein cow linear type records with first parity records for the fifteen linear type and one total score from 2001 to 2006 and pedigree data which were collected by the Korean Animal Improvement Association were used in this study. Population classified by 9 levels was more normal distributed than 50 levels. Correlation coefficients between 50 and 9 score system showed over 0.98 by each classification scheme. Therefore, the 50 point system can be substituted with 9 point system due to their highly positive correlation. However, scores in all traits were still very contingent on classifier under the 9 point system (p<0.001), and F values between foot angle and front teat attachment showed high fluctuation depending on classifier. It means that subjective opinions of classifier would influence on linear type score as ever even if class scheme transformed to system of 9 class. Therefore, the relevance of transformation to the 9 point system should be assessed after analyses about various environmental factors.

• Journal of Biomedical Engineering Research
• /
• v.23 no.4
• /
• pp.269-279
• /
• 2002

When we inject a current into an electrically conducting subject such as a human body, voltage and current density distributions are formed inside the subject. The current density within the subject and injection current in the lead wires generate a magnetic field. This magnetic flux density within the subject distorts phase of spin-echo magnetic resonance images. In Magnetic Resonance Current Density Imaging (MRCDI) technique, we obtain internal magnetic flux density images and produce current density images from $\bigtriangledown{\times}B/\mu_\theta$. This internal information is used in Magnetic Resonance Electrical Impedance Tomography (MREIT) where we try to reconstruct a cross-sectional resistivity image of a subject. This paper describes numerical techniques of computing voltage. current density, and magnetic flux density within a subject due to an injection current. We use the Finite Element Method (FEM) and Biot-Savart law to calculate these variables from three-dimensional models with different internal resistivity distributions. The numerical analysis techniques described in this paper are used in the design of MRCDI experiments and also image reconstruction a1gorithms for MREIT.

• Korean Journal of Ecology and Environment
• /
• v.43 no.2
• /
• pp.255-262
• /
• 2010

This study was conducted at 5 sites of Bocheong Stream basin in May and September 2009 for the evaluate of fish assemblage and chemical water quality. For the study, the models of Index of Biological Integrity (IBI) and Qualitative Habitat Evaluation Index (QHEI) were modified as 8 and 11 metric attributes, respectively. We also analyzed patterns of chemical water quality at the sampling site over the period of 2005~2009, using the water chemistry dataset, obtained from the Ministry of Environment, Korea. The survey showed that total sampled fishes were 34 species and the most dominant species was Zacco platypus (24.3%). In Bocheong Stream basin, values of IBI averaged 28 (n=5), which is judged as a "Good". IBI score at B1, B4 and B5 indicating a "Good" condition whereas, B2 and B3 were as 21 and 22, indicating "Fair" condition, respectively. QHEI was 152 (n=5), judged as "Fair" habitat condition. Values of BOD and COD averaged 1.0 $mgL^{-1}$ (scope: 0.3~4.0 $mgL^{-1}$) and 2.3 $mgL^{-1}$ (scope: 0.3~18.7 $mgL^{-1}$), respectively. Total nitrogen (TN), total phosphorus (TP) and suspended solid (SS) were distinct spatial variation. Based on the IBI, QHEI and chemical water quality dataset, ecological health of Bocheong Stream basin was evaluated that generally good.

• Atmosphere
• /
• v.21 no.2
• /
• pp.131-142
• /
• 2011

Spectral solar irradiances were observed using a visible and UV Multi-Filter Rotating Shadowband Radiometer on the rooftop of the Science Building at Yonsei University, Seoul ($37.57^{\circ}N$, $126.98^{\circ}E$, 86 m) during one year period in 2006. 1-min measurements of global(total) and diffuse solar irradiances over the solar zenith angle (SZA) ranges from $20^{\circ}$ to $70^{\circ}$ were used to examine the effects of clouds and total optical depth (TOD) on enhancing four solar irradiance components (broadband 395-955 nm, UV channel 304.5 nm, visible channel 495.2 nm, and infrared channel 869.2 nm) together with the sky camera images for the assessment of cloud conditions at the time of each measurement. The obtained clear-sky irradiance measurements were used for empirical model of clear-sky irradiance with the cosine of the solar zenith angle (SZA) as an independent variable. These developed models produce continuous estimates of global and diffuse solar irradiances for clear sky. Then, the clear-sky irradiances are used to estimate the effects of clouds and TOD on the enhancement of surface solar irradiance as a difference between the measured and the estimated clear-sky values. It was found that the enhancements occur at TODs less than 1.0 (i.e. transmissivity greater than 37%) when solar disk was not obscured or obscured by optically thin clouds. Although the TOD is less than 1.0, the probability of the occurrence for the enhancements shows 50~65% depending on four different solar radiation components with the low UV irradiance. The cumulus types such as stratoculmus and altoculumus were found to produce localized enhancement of broadband global solar irradiance of up to 36.0% at TOD of 0.43 under overcast skies (cloud cover 90%) when direct solar beam was unobstructed through the broken clouds. However, those same type clouds were found to attenuate up to 80% of the incoming global solar irradiance at TOD of about 7.0. The maximum global UV enhancement was only 3.8% which is much lower than those of other three solar components because of the light scattering efficiency of cloud drops. It was shown that the most of the enhancements occurred under cloud cover from 40 to 90%. The broadband global enhancement greater than 20% occurred for SZAs ranging from 28 to $62^{\circ}$. The broadband diffuse irradiance has been increased up to 467.8% (TOD 0.34) by clouds. In the case of channel 869.0 nm, the maximum diffuse enhancement was 609.5%. Thus, it is required to measure irradiance for various cloud conditions in order to obtain climatological values, to trace the differences among cloud types, and to eventually estimate the influence on solar irradiance by cloud characteristics.

• The Journal of Advanced Prosthodontics
• /
• v.6 no.1
• /
• pp.1-7
• /
• 2014

PURPOSE. The accuracy of a gypsum model (GM), which was taken using a conventional silicone impression technique, was compared with that of a polyurethane model (PM), which was taken using an iTero$^{TM}$ digital impression system. MATERIALS AND METHODS. The maxillary first molar artificial tooth was selected as the reference tooth. The GMs were fabricated through a silicone impression of a reference tooth, and PMs were fabricated by a digital impression (n=9, in each group). The reference tooth and experimental models were scanned using a 3 shape convince$^{TM}$ scan system. Each GM and PM image was superimposed on the registered reference model (RM) and 2D images were obtained. The discrepancies of the points registered on the superimposed images were measured and defined as GM-RM group and PM-RM group. Statistical analysis was performed using a Student's T-test (${\alpha}=0.05$). RESULTS. A comparison of the absolute value of the discrepancy revealed a significant difference between the two groups only at the occlusal surface. The GM group showed a smaller mean discrepancy than the PM group. Significant differences in the GM-RM group and PM-RM group were observed in the margins (point a and f), mesial mid-axial wall (point b) and occlusal surfaces (point c and d). CONCLUSION. Under the conditions examined, the digitally fabricated polyurethane model showed a tendency for a reduced size in the margin than the reference tooth. The conventional gypsum model showed a smaller discrepancy on the occlusal surface than the polyurethane model.

• Korean Journal of Social Welfare
• /
• v.35
• /
• pp.85-105
• /
• 1998

This article examined the trend of 125 empirical researches which were published in Jr. of Korean Social Welfare from the first issue to no. 33. in terms of theoretical and methodological orientations. The content analysis was employed for the purpose of the study. Since 1979, the number of empirical researches was in the trend of increasing. The findings from this research were as follows. 1) Among 166 authors, 96.4% were majored in social welfare. Also 6.0% were practitioners and the rest of them were in the position of professors or researchers. The outcome of lack of interdisciplinary co-work and researcher-practitioner co-work led the article to conclude that the nature of applied social science of social welfare was not so actively pursued in Korea. 2) It was almost impossible to find researches which studied same theme or employed same analytical framework. This meant that the work of re-verifying and proving the contray could not be done although it was essential for theory-building. In other words, the disciplinary of social welfare was far behind in the process of theory-building. 3) The methodology upon which most of researches were relied was quantitative methodology(92.8%). The article concluded 'paradigm shift' was not begun in the disciplinary of social welfare yet. 4) The study concluded that the particularity of empirical researches of social welfare in Korea was descriptive-configurative study. Whereas 65.5% of 125 empirical studies were descriptive-configurative, 25% were hypothesis - model test and only 6% causal analysis. 5) The most applied statistic models through the period from 1979 to 1997 were descriptive statistics such as frequency, chi square test, Pearson's r. More advanced statistics such as logit regression, probit regression, path analysis, covariance structure analysis were shown since 1990.

• Journal of Korea Port Economic Association
• /
• v.35 no.4
• /
• pp.187-206
• /
• 2019

After reviewing the concept and previous studies related to green ports, this study analyzes the implications of green port policy of advanced ports in foreign countries and analyzes problems in terms of environmentally-friendly green port policy for Ulsan port, and to present sustainable green logistics establishment measures. The literature survey and Benchmarking methods are adopted as research methodology and the results are as follows. First, the pan-government climate change response management system, legislation of relevant laws, implementation of fiscal support policies, and roadmaps should be established. Second, the foundation for eco-friendly green growth should be established through the discovery of business models in conjunction with leading industries in the Southeastern Metropolitan Economic Area. Third, the Ulsan Port Greenport, such as AMP, in-port LNG propulsion ship, and ESI vessel incentive, should be built. Fourth, a low-carbon, high-efficiency sea-shuttle service shall be established through the introduction of the sea-shuttle service along the sea route. Fifth, energy self-reliant ports, including all institutions in the metropolitan Ulsan port area that have exceeded the level of Ulsan port Authority, should be built. Finally, water-type ports need to be built through the creation of coastal forests, the purification of marine water quality, and the introduction of colors to port.

• Journal of Service Research and Studies
• /
• v.7 no.4
• /
• pp.39-50
• /
• 2017

As a comparative study on the value of design concept between service provider (Developer) and service receiver (Customer) group, the aims of this study was to present a service model focused on Continuous positive airway pressure (CPAP) based on U-health care and user environment. Double Diamond-based methods led to a case study that conducted jointly by the department of otolaryngology in U hospital, Ulsan. By targeted on Sleep Apnea patients from the stage of diagnosis to CPAP treatment, variety of meaningful experiences have been extracted and classified into several types of customers. In the final analysis of the 13 service scenario models, Kano Satisfaction and Potential Customer Satisfaction Improvement Index (PCSI) were conducted with the customers, yet Score Model and Concept Position were evaluated by the service provider groups who engaged in development services. The results of this study showed that 7 items in the total of 12 items reached a consensus of viewpoint on value between service receiver and service provider, which the attributes of the service model are based on user environment. Whereas the other 5 items showed the divergent viewpoint on value which included the attributes of U-healthcare service model.