• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.972-975
• /
• 2001

The effect of Cr$_2$O$_3$(0 to 0.5 wt%) doping on the microstructure and electrical properties of ternary Pb(Zr,Ti)O$_3$-Pb(Ni,Nb)O$_3$piezoelectric ceramic has been investigated. Abnormal grain growth (grain size 3.3 to 11.2 $\mu$m) and densification are found. Minor additives of $\leq$0.1 wt% improve the mechanical coupling factor, but with more additives of $\geq$0.2 wt% electrical properties deteriorate. Thus, these phenomna can be ascribed mainly to anomalous developed microstructure. The large grains were composed of a core region that is free of Cr and a surrounding shell region rich in Cr. The interfaces between the core and the shell were composed of misfit dislocations. The mechanical properties of the specimens were strongly influenced by this microstructural change. The microstrutural and compositonal evolution of the specimens containing different amounts of Cr$_2$O$_3$were monitored. Electrical properties were measured and related to the variations in the microstructure.

• 한국표면공학회지
• /
• 제47권6호
• /
• pp.293-296
• /
• 2014

Fe-Ni has been of great interest because it is known as one of low thermal expansion alloys as various application areas. This alloy was fabricated by electroforming process, and effect of heat treatment on thermal expansion and hardness was investigated. Nano-crystalline structure of 13.3 - 63.5 nm in size was observed in the as-deposited alloy. To investigate the effect of heat treatment on grain growth and mechanical/thermal properties, we conducted hardness and coefficient of thermal expansion (CTE). From this, we confirmed these properties were varied by heat treatment. In this nano-crystalline alloy, we could observe abnormal behavior in thermal expansion between $350-400^{\circ}C$. Additionally, an abrupt change in hardness has also been observed. However, once the grains grow up to micro-sized the mechanical and thermal properties mentioned above were stabilized similar to those of bulk alloys due to heat treatment.

• 한국재료학회지
• /
• 제31권9호
• /
• pp.488-495
• /
• 2021

Solid state grain growth (SSCG) is a method of growing large single crystals from seed single crystals by abnormal grain growth in a small-grained matrix. During grain growth, pores are often trapped in the matrix and remain in single crystals. Aerosol deposition (AD) is a method of manufacturing films with almost full density from nano grains by causing high energy collision between substrates and ceramic powders. AD and SSCG are used to grow single crystals with few pores. BaTiO₃ films are coated on (100) SrTiO₃ seeds by AD. To generate grain growth, BaTiO₃ films are heated to 1,300 ℃ and held for 10 h, and entire films are grown as single crystals. The condition of grain growth driving force is ∆G_max < ∆G_c ≤ ∆G_seed. On the other hand, the condition of grain growth driving force in BaTiO₃ AD films heat-treated at 1,100 and 1,200 ℃ is ∆G_c < ∆G_max, and single crystals are not grown.

• 한국재료학회지
• /
• 제29권4호
• /
• pp.205-210
• /
• 2019

$Pb(Zr,Ti)O_3$ (PZT) is used for the various piezoelectric devices owing to its high piezoelectric properties. However, lead (Pb), which is contained in PZT, causes various environment contaminations. $(K,Na)NbO_3$ (NKN) is the most well-known candidate for a lead-free composition to replace PZT. A single crystal has excellent piezoelectric-properties and its properties can be changed by changing the orientation direction. It is hard to fabricate a NKN single crystal due to the sodium and potassium. Thus, $(Na,K)NbO_3-Ba(Cu,Nb)O_3$ (NKN-BCuN) is chosen to fabricate the single crystal with relative ease. NKN-BCuN pellets consist of two parts, yellow single crystals and gray poly-crystals that contain copper. The area that has a large amount of copper particles may melt at low temperature but not the other areas. The liquid phase may be responsible for the abnormal grain growth in NKN-BCuN ceramics. The dielectric constant and tan ${\delta}$ are measured to be 684 and 0.036 at 1 kHz in NKN-BCuN, respectively. The coercive field and remnant polarization are 14 kV/cm and $20{\mu}C/cm^2$.

• 한국기후변화학회지
• /
• 제4권4호
• /
• pp.371-384
• /
• 2013

최근 기후변화로 인해 잇따라 발생하는 전 지구적 이상기후의 출현은 사회 전반에 걸쳐 직 간접적으로 많은 영향을 미친다. 특히, 자연을 통해 기본 에너지를 얻는 농업은 기상환경에 따라 작물의 생장과 수확이 직접적으로 영향을 받기 때문에, 기후변화와 관련된 사회적 중요 관심사가 되었다. 본 연구에서는 국내 주요 수입곡물중 큰 부분을 차지하고 있는 옥수수와 밀에 대하여 주요 수출국인 미국과 중국을 대상으로 생산량에 많은 영향을 끼치는 온도의 변화 경향을 통해 취약성 평가를 하였다. 주요 곡물 생산국들의 곡물 생산성에 영향을 미치는 재배기간을 문헌 및 기존 연구를 통해 국가별로 파악하여 주요 재배기간으로 정하고, 옥수수와 밀에 대한 생산국별 주요 재배기간에 해당하는 미래 기상은 RCP8.5 기후변화 시나리오를 기반으로 구축하였다. 기온의 변화경향을 나타내는 적응성과 기온의 변화 정도를 나타내는 민감도를 이용하여 중국과 미국 간의 곡물별 생산취약성을 분석한 결과, 과거에 밀은 미국이 생산에 유리하고, 옥수수는 중국이 유리하였지만, 미래에는 두 곡물 모두 미국이 생산에 유리한 것으로 나타났다. 본 연구를 통해 도출된 생산성 취약성 평가 결과는 기후변화로 인한 미래 수입 곡물 가격변동에 대한 대비 자료로 이용될 수 있을 것으로 판단된다.

• 대한지리학회지
• /
• 제43권6호
• /
• pp.858-872
• /
• 2008

본 연구는 사료를 기초로 조선시대 제주도의 기상재해에 대하여 살펴보고, 정부와 제주민들은 이에 어떻게 대응했는지를 분석하였다. 조선시대 제주도의 기상 특이일 기록 건수는 17세기가 가장 많았고, 18세기, 16세기, 15세기, 19세기 순으로 나타났다. 기상재해의 유형별로는 풍해가 가장 많았고, 수해, 한해(旱害), 설동해 순으로 나타났다. 지역별로는 제주목이 풍해와 수해가 많았고, 대정현은 한해가 많았다. 기상재해가 발생하면 기근으로 이어지는 것이 상례였다. 정부에서는 한반도의 곡식을 제주도로 이전하여 백성을 구제하였으며, 이를 위해 갈두진창, 나리포창, 제민창을 설치하였다. 또한 제주도 백성을 평안도 등 한반도로 이주시켜 만성적인 기근을 해결하고자 했다. 이상 기후에 대응하여 제주도 농민들은 답전, 바령, 복토, 방풍 등의 농법을 행하였고, 해민들은 환전, 석력 선적 등의 항해술을 행하였다.

• 한국재료학회지
• /
• 제21권4호
• /
• pp.220-224
• /
• 2011

Zircon has excellent thermal, chemical, and mechanical properties, but it is hard to make a dense sintered product because of dissociation during the sintering process. This study analyzes how the addition of $SiO_2$ and $Al_2O_3$ affects the mechanical properties of sintered zircon, particularly in regards to reducing the thermal dissociation and improving the mechanical properties of $ZrSiO_4$. Zircon specimens containing different amounts of $SiO_2$ and $Al_2O_3$ were prepared and sintered to observe how the mechanical properties of $ZrSiO_4$ changed according to the differing amount of $SiO_2$ and $Al_2O_3$. The $ZrSiO_4$ that was used for the starting material was ground by ball mill to an average particle size of 3 ${\mu}m$. The $SiO_2$ and $Al_2O_3$ that was used for additives were ground to an average particle size of 3 ${\mu}m$ and 0.5 ${\mu}m$, respectively. Adding $SiO_2$ resulted in transformation in the liquid phase at high temperatures, which had little effect on suppressing the thermal dissociation but enhanced the mechanical properties of $ZrSiO_4$. When $Al_2O_3$ was added, the mechanical properties of $ZrSiO_4$ decreased due to the formation of pores and abnormal grains in the microstructure of the sintered zircon.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2010년도 춘계학술발표대회
• /
• pp.48.2-48.2
• /
• 2010

The effect of additives as rare-earth in dielectric materials has been studied to meet the development trend in electronics on the miniaturization with increasing the capacitance of MLCCs (multi-layered ceramic capacitors). It was reported that the addition of rare-earth oxides in dielectrics would contribute to enhance dielectric properties and high temperature stability. Especially, dysprosium and thulium are well known to the representative elements functioned as selective substitution in barium titanate with perovskite structure. The effects of these additives on microstructure and electric properties were studied. The 0.8 mol% Dy doped $BaTiO_3$ and the 1.0 mol% Tm doped $BaTiO_3$ had the highest electric properties as optimized composition, respectively. According to the increase of rare-earth contents, the growth of abnormal grains was suppressed and pyrochlore phase was formed in more than solubility limits. Furthermore, the effect of two rare-earth elements co-doped $BaTiO_3$ on the dielectric properties and insulation resistance was investigated with different concentration. The dielectric specimens with $BaTiO_3-Dy_2O_3-Tm2O_3$ system were prepared by design of experiment for improving the electric properties and sintered at $1320^{\circ}C$ for 2h in a reducing atmosphere. The dielectric properties were evaluated from -55 to $125^{\circ}C$ (at $1KHz{\pm}10%$ and $1.0{\pm}0.2V$) and the insulation resistance was examined at 16V for 2 min. The morphology and crystallinity of the specimens were determined by microstructural and phase analysis.

• Journal of Plant Biology
• /
• 제3권1호
• /
• pp.32-38
• /
• 1960

Since the peculiar virus disease of chinese date tree (Zizyphus jujuba Mill. var. inermis Rehd.) has been noted in South Korea around 1950, 70% to 80% of the economically important trees have been either completely destroyed or infected with the virus, severe damage has been noted, particularly, across the area ranged from middle east to the middle part of Korea, including Seoul area. Yoon-Koock-Byung in 1958 first reported the disease and descirbed it might be caused by a kinds of yellows. But he did not conform in his paper that the disease is pecisely caused by yellows virus. The authors, hereby intend to identify the true cause of the desease of the chinese data tree by studying the external symptoms of the disease and the internal morphological characteristics of the diseaset plant which shows various abnormalities in contrast to the healthy checks. In view of fact that leaves of the infected plants become yellowish in color similar to the peach yellows, aster yellows, it is likely to be identifiable as the common yellows. Furthermore, the abnormal characteristics observed by the authors are as follow: The floral organs such as petals, sepals, stamens, and pistil turn into vegetative leaves, the leaves on heavily infected plant appear as small sized one and also showing as a common witch's broom like symptom. There are also an occuring of numerous advantitious shoots developed from both of stems and roots. The amount of photosynthetic starch grains increases in parenchymatous cells, necrosis takes place in mesophyll, Particularly, Palisade Parenchyma in the leaves of infected plants are distinguished in contrast to the healthy checks. From the symptoms and the present experimetns described above, the authors are believed that the disease of chinese data tree is not caused by the yellows. It appears the disease is rather similar to the symptoms of sandal spike virus which was noted in India early in this centry. But the host plant of standal disease, Santalum albun L. and the insect vector, Jassus indicus Wal., have never been reported in Korean flora and the founa. The termperature and the otehr environmental factors is quite different Korea and India. Thus the authors believe that the peculiar disease must be an endemic new virus origin in Korea and must be called as "shoot cluster disease of chinese date tree."

• 한국세라믹학회지
• /
• 제49권6호
• /
• pp.485-492
• /
• 2012

Dense and single phase $BiFeO_3$ (BFO) ceramics were prepared using attrition milled calcined (coarse) powders of an average particle size of ${\approx}3{\mu}m$ by conventional sintering process. A relative density of ${\approx}96%$ with average grain size $7.3{\mu}m$ was obtained when the powder compacts were sintered at $850^{\circ}C$ even for a shorter duration of 10 min. In contrast, densification barely occurred at $800^{\circ}C$ for up to 12 h rather the microstruce showed the growth of abnormal grains. The grain growth behavior at different temperatures is discussed in terms of nonlinear growth rates with respect to the driving force. The sample sintered at $850^{\circ}C$ for 12 h showed enhanced electrical properties with leakage current density of $4{\times}10^{-7}A/cm^2$ at 1 kV/cm, remnant polarization $2P_r$ of $8{\mu}C/cm^2$ at 20 kV/cm, and minimal dissipation factor (tan ${\delta}$) of ~0.025 at $10^6$ Hz. These values are comparable to the previously reported values obtained using unconventional sintering techniques such as spark plasma sintering and rapid liquid phase sintering.