• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2006년도 춘계학술대회 논문집
• /
• pp.407-409
• /
• 2006

This paper presents the methods of designing the control circuits for a Class D amplifier to have a peak performance. The proposed approach is based on the three functional components - a carrier generator, a feedback circuit and a dead-time circuit. First the analog signal is applied to the controller, which outputs the 3 level PWM waveform. The controller used for this experiment is made of the operational amplifier and the logic circuit. The experimental results show that the control circuit performs with satisfaction and its output is proportional to input audio signal, providing a satisfactory 3 level PWM pattern. From this design methodology, by implementing a proposed control circuit we can achieve the efficient Class D amplifier using the half-bridge, full-bridge or push-pull topology at the output stage.

• Journal of the Korean Data and Information Science Society
• /
• 제3권1호
• /
• pp.47-63
• /
• 1992

Bechhofer and Tamhane(1981) proposed Balanced Treatment Incomplete Block (BTIB) desings for comparing p test treatments with a control treatment in blocks of size ${\kappa}$. Notz and Tamhane(1983) solved the problem about determination of the minimal complete class for ${\kappa}=3$. However there are a number of design parameters for which BTIB designs do not exist. We suggest a new class of designs called Group Divisible Treatment Desings(GDTD's) that is a larger class including BTIB designs as a subclass. In this paper we give the minimal complete classes of generator designs for GDTD's with ${\kappa}=2,\;p{\geq}4(except\;prime\;number)\;and\;{\kappa}=3,\;p=4(2)6$.

• Transactions on Control, Automation and Systems Engineering
• /
• 제3권3호
• /
• pp.164-169
• /
• 2001

This paper considers the problem of robust stabilization and disturbance attenuation for a class of uncertain singularly perturbed systems with norm-bounded nonlinear uncertainties. It is shown that the state feedback gain matrices can be determined to guarantee the stability of the closed-loop system for all $\varepsilon$$\in$(0, $\infty$). Based on this key result and some standard Riccati inequality approaches for robust control of singularly perturbed systems, a constructive design procedure is developed.

• 전기학회논문지
• /
• 제57권7호
• /
• pp.1247-1253
• /
• 2008

A design method of a T-S fuzzy model based reduced order nonlinear unknown input observer(NUIO) is presented. The fuzzy NUIO is designed based on the parallel distributed compensation(PDC) concept. It consists of a number of the linear UIOs, each of which is designed for each local linear model in the T-S fuzzy model of a class of nonlinear systems. The fuzzy NUIO provides not only the state estimates insensitive to the unknown inputs, for example, disturbances and faults etc., but also the estimates of the unknown inputs. Therefore, It can be employed in the state feedback control and disturbance rejection control of a class of nonlinear systems with unknown disturbances. It also applied to the robust residual generation for the fault detection and isolation systems and to the design of fault tolerant control systems. As an example, the NUIO is applied to an inverted pendulum system to show the state and disturbance estimation performance and to illustrate the fuzzy reduced order NUIO design method.

• 제어로봇시스템학회논문지
• /
• 제10권3호
• /
• pp.216-224
• /
• 2004

In this paper we address reliable output feedback control problem for a class of linear systems with actuator/sensor failures. An output feedback control method is proposed which stabilizes the plant and guarantees $H_\inftyt$-norm constraint against all admissible actuator/sensor failures. The controller can be obtainer by solving some LMls that cover all failure cases. Effectiveness of this controller is validated via a numerical example. This paper addresses reliable output feedback control problem for a class of linear systems with actuator/sensor failures. An output feedback control method is proposed which stabilizes the plant and guarantees $H_\inftyt$-norm constraint against all admissible actuator/sensor failures. The controller can be obtained by solving some LMls that cover all failure cases. Effectiveness of this controller is validated via numerical example.

• Journal of Electrochemical Science and Technology
• /
• 제1권1호
• /
• pp.39-44
• /
• 2010

1.5 V and 3.0 V-class film-type primary batteries were designed for radio frequency identification (RFID) tag. Efficient fabrication processes such as screen-printings of conducting layer ($25{\mu}m$), active material layer ($40{\mu}m$ for anode and $80{\mu}m$ for cathode), and electrolyte/separator/electrolyte layer ($100{\mu}m$), were adopted to give better performances of the 1.5 V-class film-type Leclanch$\acute{e}$ primary battery for battery-assisted passive (BAP) RFID tag. Lithium (Li) metal is used as an anode material in a 3.0 V-class film-type $MnO_2||$Li primary battery to increase the operating voltage and discharge capacity for application to active sensor tags of a radio frequency identification system. The fabricated 3.0 V-class film-type Li primary battery passes several safety tests and achieves a discharge capacity of more than 9 mAh $cm^{-2}$.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1955-1959
• /
• 2005

This paper presents a systematic analysis and a simple design of a robust adaptive control law for a class of non linear systems with modeling errors and a time-delay input. The theory for designing a robust adaptive control law based on input- output feedback linearization of non linear systems with uncertainties and a time-delay in the manipulated input by the approach of parameterized state feedback control is presented. The main advantage of this method is that the parameterized state feedback control law can effectively suppress the effect of the most parts of nonlinearities, including system uncertainties and time-delay input in the pp-coupling perturbation form and the relative order of non linear systems is not limited.

• 대한전자공학회논문지TC
• /
• 제45권12호
• /
• pp.1-6
• /
• 2008

본 논문에서는 전력증폭기의 입력신호의 크기에 따라 CMOS class-E 전력증폭기의 게이트와 드레인의 바이어스 전압을 조절함으로써 낮은 출력전력에서도 80% 이상의 고효율 특성을 갖는 CMOS class-E 전력증폭기를 설계하였다. 입력신호의 포락선을 검파하여 전력증폭기의 바이어스 전압을 조절하는 방법을 이용하였고, 동작주파수는 2.14GHz, 출력전력은 22dBm에서 25dBm, 전력부가효율은 모든 입력전력레벨에서 80.15%에서 82.96%의 특성을 얻을 수 있었다.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2005년도 종합학술발표회 논문집 Vol.15 No.1
• /
• pp.97-100
• /
• 2005

This paper proposes a linearization method that is to control the operating point of a class AB amplifier according to its output power. The proposed linearization method is presented in this paper and the performance test results using two-tone signal are presented also.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 B
• /
• pp.1278-1280
• /
• 1996

In this paper, an Iterative learning control algorithm is presented for a class of non linear system which have external inputs or disturbances. The acceleration of error signal is used to update the next control signal. It is shown that the feedback gain can be deter.ined so that the overall errors are convergent.