• Journal of the Korea Institute of Military Science and Technology
• /
• v.19 no.5
• /
• pp.669-674
• /
• 2016

The purpose of this study is to demonstrate the suitability of hydrogen peroxide($H_2O_2$) vapor system for platform interior decontamination. Geobacillus stearothermophilus biological indicator(BI) strips and a field tent were used as a biological simulant and as a simulated platform, respectively. Decontamination was performed based on injection rates and tent sizes with exposure time 60 minutes. We standardized the conditions for the field tent decontamination : 8.0 g/min for $30m^3$($H_2O_2$ vapor concentration of 150~500 ppm, relative humidity of 50 %) and 12.0 g/min for $60m^3$($H_2O_2$ vapor concentration of 250~400 ppm, relative humidity of 55 %). Thus we suggest the system is one of the possible candidates for decontamination of platform interiors.

• 한국연소학회:학술대회논문집
• /
• 2014.11a
• /
• pp.215-218
• /
• 2014

High combustion efficiency of hydrogen could make it an ideal source of green energy in the future. At this time, high pressure vessel is the most reasonable method of storing hydrogen. However, such a high pressurized vessel could pose a critical threat if ruptured. For this reason, it is important to understand the mechanism of hydrogen's self-ignition when a high-pressure hydrogen released into air. This paper presents several visualization images as experimental results using high-speed camera. From the visualization images, the ignition is initiated near rupture disk immediately after failure of disk. And the initial ignition and flame is stronger as a rupture pressure increases. However, this ignition region do not affect the general self-ignition mechanism when a high-pressure hydrogen is released into air through tue after failure of disk.

• Proceedings of the KIEE Conference
• /
• 1996.07a
• /
• pp.238-240
• /
• 1996

This paper presents the optimum design of the slit type linear induction motor(LIM). For the analysis of the slit type LIM, as the boundary problem, the equivalent circuit is composed from the analysis method given the slit pitch boundary condition. Using the deterministic method and the stochastic method among the optimization methods, each of the optimum design variables is derived. The analysis result by the proposed method is compared with the experimental result.

• Journal of the Korean Society of Combustion
• /
• v.4 no.1
• /
• pp.131-139
• /
• 1999

A Numerical Analysis of NOx production in Hydrogen-Air flame is performed using the quasi-laminar reaction modelling. As results, in low global strain rate region, $U_F/D_F\;{\leq}\;50,000$, the quasi-laminar reaction modelling reproduces the experimentally observed EINOx half power scaling that the ratio of EINOx and flame residence time, $L_f^3(D_F^2U_F)$, is proportional to the square root of global strain rate. Thus, it suggests that turbulence-chemistry interaction has a minor impact on the trend of NOx production in low global strain rate region. However, the quasi-laminar reaction modelling predicts the higher temperature and NOx than experimentally observed. This overprediction may be due to the lack of radiation and quasi-laminar reaction modelling.

• Journal of Korean Society of Rural Planning
• /
• v.12 no.2 s.31
• /
• pp.1-9
• /
• 2006

Current environmental problems of rural area are connected to loss of rural functions which is food security as well as conservation of environment, balanced development of country and succession of traditional culture. To solve these problems, recent projects are focusing on social changes in rural area and conservation of rurality creating values of rural amenity resources. At this point, full implications of rurality which is the various aspects of rurality should be defined to be applied in direct plans to conserve the rurality. In this study, nine attributes of rurality are found as various meanings with adjectives included in image of rurality. For practical use of these adjectives of rurality attributes, we evaluate the list of rural amenity resources and suggested plans for conservation of rural amenity. These attributes can be used as an effective method for village plan which brings one of the attributes into relief.

• BMB Reports
• /
• v.30 no.6
• /
• pp.410-414
• /
• 1997

We purified a protein carboxyl O-methyltransferase (protein methylase II) from porcine spleen to homogeneity. The molecular weight of the porcine spleen protein methylase II (ps-PM II) was estimated to be 27,500 daltons on SDS-PAGE. Amino acid sequence of N-terminal 28 residues for ps-PM II was identified. Amino-terminal three amino acid residues of ps-PM II were deleted when compared to those of other protein carboxyl methytransferase. S-Adenosyl-L-homocysteine competitively inhibits ps-PM II with a K, value of $1.63{\times}10^{-7}M$. Myelin basic protein exhibited the highest methyl-accepting capacity among the proteins tested.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.565_566
• /
• 2009

전력거래소는 시장원리를 적용한 지원금 입찰제에 의한 수요시장을 설계하고 시장운영에 필요한 시스템을 구축하여 수요반응을 측정하기 위한 수요자원시장을 2008년도에 시범적으로 운영하였다. 본 논문에서는 작년도 수요자원시장 운영결과를 분석하여 개선점을 도출하고 수요반응에 입각한 전력수요 자원을 효율적으로 활용하기 위한 방안에 대하여 소개한다.

• Korean Institute of Interior Design Journal
• /
• v.14 no.2 s.49
• /
• pp.72-82
• /
• 2005

Metaphor has been regarded as a simple methods for decorating languages for a long time, nowadays it has important role in creative thinking. Designers have had used metaphoric thoughts in art work design and architectural design as well as writers. But designers and art critics have not recognize its importance, in addition research about metaphor specially in design have not even started yet in any design areas. This research is on the line of studying automation design by explain mechanism of metaphoric design regarded as black box. Ronchamp Chapel design by Le Corbusier has been analyzed and some metaphoric processes has been logically described. In this process, properties of sound are transferred and used as window design to control lights.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.2
• /
• pp.125-130
• /
• 2011

This paper shows a method to design complementary filter using least square. The complementary filter is one of useful filters estimating angle. The basic concept of this filter is to enhance advantages of each sensor that angle detecting using a gyroscope has good accuracy at a high frequency and an accelerometer at a low frequency. When designing complementary filter, the most commonly used method is using cut-off frequency. However, it may be not easy to obtain a cut-off frequency. This paper presents a systematic method to determine the coefficients of the complementary filter using well-known linear least squares minimizing error between estimating angle and true angle.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.12
• /
• pp.1201-1207
• /
• 2010

This paper shows to stabilize a balancing robot. We derive the dynamics of a balancing robot and design its controller using LQR method. For stabilizing balancing robot, we introduce a method to detect an angle using inertial sensors. In this study, we use a complementary filter to fuse signals by frequency response of gyroscope and accelerometer in order to measure the inclined angle of balancing robot. The filter coefficients are obtained by least square to minimize error in angle-detecting filter design. And then, after we derive a dynamics of balancing robot using Lagrange method, we linearize that dynamics for using LQR method.