• 대한기계학회논문집A
• /
• 제21권1호
• /
• pp.164-172
• /
• 1997

Two parameter technique that uses far-field stress and displacement distributions was applied to composite laminates in order to calculate mode II energy release rate, $G_{II}$ . The $G_{II}$ calculated by two parameter technique was compared with that calculated from the crack closure method to inspect the effectiveness of two parameter technique. Sensitivity study of two parameter technique to the crack extension size was also performed. The results showed that both methods produced comparable $G_{II}$ results. In particular, it was found that although the crack closure method was affected by the crack extension size, the two parameter technique was less affected by the crack extension size.

• Communications for Statistical Applications and Methods
• /
• 제14권1호
• /
• pp.255-266
• /
• 2007

A Bayesian estimation of the four-parameter gamma distribution is considered under the noninformative prior. The Bayesian estimators are obtained by the Gibbs sampling. The generation of the shape/power parameter and the power parameter in the Gibbs sampler is implemented using the adaptive rejection sampling algorithm of Gilks and Wild (1992). Also, the location parameter is generated using the adaptive rejection Metropolis sampling algorithm of Gilks, Best and Tan (1995). Finally, the simulation result is presented.

• 한국해양공학회지
• /
• 제13권4호통권35호
• /
• pp.174-181
• /
• 1999

A form parameter method compounds the form parameters which define the hull geometric characteristics. This method can transform a hull form by changing the form parameters. The form parameter method is a hull define method without utilization of mother ships. However it is difficult to determine these form parameters. Thus, we are complemented the form parameter method using the neural networks. It is found that the form parameter method using the neural networks is efficient in hull form design by consideration of application examples.

• 한국군사과학기술학회지
• /
• 제14권1호
• /
• pp.92-99
• /
• 2011

In this study, new multi-axial, critical plane based, fretting fatigue crack initiation parameter is developed by the addition of a new term into the Modified Shear Stress Range(MSSR) parameter. The newly developed parameter (MSSR') is then used to evaluate fretting fatigue life of titanium alloy, Ti-6A1-4V with various contact conditions. Finite element analysis is also used in order to obtain stress distribution on the contact surface during fretting fatigue test, which is then used for the calculation of fretting fatigue parameter. The MSSR' parameter shows better performance in predicting fretting fatigue lives from the conventional fatigue data, and less scattering within fretting fatigue data with different contact geometries.

• 산업경영시스템학회지
• /
• 제32권3호
• /
• pp.99-109
• /
• 2009

Negative binomial yield model for semiconductor manufacturing consists of two parameters which are the average number of defects per die and the clustering parameter. Estimating the clustering parameter is quite complex because the parameter has not clear closed form. In this paper, a Bayesian approach using Markov Chain Monte Carlo is proposed to estimate the clustering parameter. To find an appropriate estimation method for the clustering parameter, two typical estimators, the method of moments estimator and the maximum likelihood estimator, and the proposed Bayesian estimator are compared with respect to the mean absolute deviation between the real yield and the estimated yield. Experimental results show that both the proposed Bayesian estimator and the maximum likelihood estimator have excellent performance and the choice of method depends on the purpose of use.

• 영어어문교육
• /
• 제5호
• /
• pp.219-247
• /
• 1999

The purpose of this paper is to examine how Korean learners of English reset the "prodrop" parameter of Korean into "non-prodrop" parameter of English in the process of English acquisition. An experiment was conducted to 45 Korean learners of English on the prodrop phenomenon, namely on the null referential or null nonreferential subject, and subject-verb agreement by way of grammatical judgment. The results of the experiment are as follows: First, L2 learners follow the parameter of L1, and then reset the parameter of L2 regardless of the parameter of L1 as their L2 abilities advance. Thus, this study provides further support for the hypothesis that universal grammar is available via L1. Second, the referential subject is, at first, easier to acquire than nonreferential subject, and the triggering fact for the switch from [+prodrop] to [-prodrop] was the use of nonreferential subjects. Third, 3rd person agreement has no connection with the acquisition of the prodrop parameter as a result of subject-verb agreement. Therefore, these results indicate that verb agreement is not a trigger for the recognition of the obligatory subject.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.268-272
• /
• 1996

Error correction effect for maladjusted stereo cameras with calibrated pixel distance parameter is presented. The camera calibration is a necessary procedure for stereo vision-based depth computation. Intra and extra parameters should be obtain to determine the relation between image and world coordination through experiment. One difficulty is in camera alignment for parallel installation: placing two CCD arrays in a plane. No effective methods for such alignment have been presented before. Some amount of depth error caused from such non-parallel installation of cameras is inevitable. If the pixel distance parameter which is one of intra parameter is calibrated with known points, such error can be compensated in some amount. Such error compensation effect with the calibrated pixel distance parameter is demonstrated with some experimental results.

• 전자공학회논문지S
• /
• 제34S권11호
• /
• pp.73-79
• /
• 1997

This paepr is concerned with the design of linear parameter varying filter that ensures H$^{2}$/$H^{\infty}$ performance for a class of linear parameter varying(LPV) plants. The state space matrices of plant are assumed to be dependent affinely on a vector of time varying parameter, and each parameter is assumed to be measured in real time. Using the linear matrix inequalities(LMIs), we can solve the synthesis problem and the solution of LMIs is carried out off-line. The designed filter is parameter varying and automatically scheduled along parameter trajectories. Because the solution of LMIs is carried out off-line, computation time of filter gain is reduced. The validity of the proposed algorithm is verifed through computer simulation..

• 대한수학회보
• /
• 제57권3호
• /
• pp.751-762
• /
• 2020

We define the average of a set of continuous functions of two variables (surfaces) using the structure of the two-parameter Wiener space that constitutes a probability space. The average of a sample set in the two-parameter Wiener space is defined employing the two-parameter Wiener process, which provides the concept of distribution over the two-parameter Wiener space. The average defined in our work, called an average function, also turns out to be a continuous function which is very desirable. It is proved that the average function also lies within the range of the sample set. The average function can be applied to model 3D shapes, which are regarded as their boundaries (surfaces), and serve as the average shape of them.

• 대한전기학회논문지
• /
• 제39권10호
• /
• pp.1075-1085
• /
• 1990

This paper presents a new method for the optimal control of the distributed parameter systems by a decentralized computational procedure. Approximate lumped parameter models are derived by using the Galerkin method employing the Legendre polynomials as the basis functions. The distributed parameter systems, however, are transformed into the large scale lumped parameter models. And thus, the decentralized control scheme is introduced to determine the optimal control inputs for the obtained lumped parameter models. In addition, an approach to block pulse functions is applied to solve the optimal control problems of the obtained lumped parameter models. The proposed method is simple and efficient in computation for the optimal control of distributed paramter systems. Illustrative examples given to demonstrate the validity of the presently proposed method.