• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11a
• /
• pp.238-242
• /
• 2001

In this paper, the current-voltage characteristics of a 4H-SiC MESFET is simulated by using the Atlas Simulation tool. we are able to use the simulator to extract more information about the new material 4H-SiC, including the mobility, velocity-field Curve and the Schottky barrier height. We have enabled and used the new simulator to investigate breakdown Voltage and thus predict operation limitations of 4H-SiC device. Modeling results indicate that the Breakdown Voltage is 197 V and Current is 100 mA

• Journal of the Korean institute of surface engineering
• /
• v.48 no.1
• /
• pp.7-10
• /
• 2015

Recently, oxide TFTs has attracted a lot of interests due to their outstanding properties such as excellent environmental stability, high mobility, wide-band gap energy and high transparency, and investigated through the method using vacuum system and wet solution. In the case of the method using wet solution, process is very simple, however, annealing process should be included. In this study, to overcome the problem of annealing process, atmospheric pressure plasma was used for annealing, and the electrical characteristics such as on/off ration and mobility of device were investigated.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.11
• /
• pp.973-976
• /
• 2008

In addition to its similarity to genuine diamond film, diamond-like carbon (DLC) film has many advantages, including its wide band gap and variable refractive index. In this study, DLC films were prepared by the RF PECVD (Plasma Enhanced Chemical Vapor Deposition) method on silicon substrates using methane ($CH_4$) and hydrogen ($H_2$) gas. We examined the effects of the RF power on the electrical properties of the DLC films. The films were deposited at several RF powers ranging from 50 to 175 W in steps of 25 W. The leakage current of DLC films increased at higher deposition RF power. And the resistivities of DLC films grown at 50 W and 175 W were $5\times10^{11}$ ${\Omega}cm$ and $2.68\times10^{10}$ ${\Omega}cm$, respectively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.138-139
• /
• 2007

탄화규소반도체소자는 wide band-gap 반도체 재료로 고전압, 고속스위칭 특성이 우수하여 차세대 전력반도체소자로 매우 유망한 소자이다. 이러한 물리적 특성으로 전력변환소자인 고전압 MOSFET 소자를 개발하기 위한 연구가 활발히 진행되고 있다. 그러나 MOS 소자에서 가장 중요한 게이트 산화막의 특성이 소자에 적용하기에는 그 특성이 많이 취약한 상태이다. 따라서 이러한 단점을 해결하여 고전압 전력변환소자로 적용하기 위하여 게이트 산화막이 필요없는 JFET 소자가 많이 연구되고 있다. 본 논문에서는 JFET 소자를 normally-off type으로 동작시키기 위하여 게이트의 구조, 도핑농도 및 게이트 폭을 조절하여 simulation를 수행하였다. 케이트의 농도 및 접합깊이에 따라 normally-on 또는 off 특성에 큰 영향을 미치고 있으며 게이트 트렌치구조의 깊이에 따라서도 영향을 받는다. 본 simulation 결과 최적의 트렌치 길이, 폭 및 농도로 소자를 구성하여 $1.3m{\Omega}cm^2$의 온-저항 특성을 얻을 수 있었다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.211.1-211.1
• /
• 2013

We fabricate the conductive zinc oxide(ZnO) thin film using UV-enhanced atomic layer deposition. ZnO is semiconductor with a wide band gap(3.37eV) and transparent in the visible region. ZnO can be deposited with various method, such as metal organic chemical vapour deposition, magnetron sputtering and pulsed laser ablation deposition. In this experiment, ZnO thin films was deposited by atomic layer deposition using diethylzinc (DEZ) and D.I water as precursors with UV irradiation during water dosing. As a function of UV exposure time, the resistivity of ZnO thin films decreased dramatically. We were able to confirm that UV irradiation is one of the effective way to improve conductivity of ZnO thin film. The resistivity was investigated by 4 point probe. Additionally, we confirm the thin film composition is ZnO by X-ray photoelectron spectroscopy. We anticipate that this UV-enhanced ZnO thin film can be applied to electronics or photonic devices as transparent electrode.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11b
• /
• pp.1120-1125
• /
• 2001

A new concept of piezoelectric smart panels for noise reduction in wide band frequencies is proposed and their possibility is experimentally investigated. Multi-mode damping is studied by using a newly proposed tuning method. The proposed panels are based on passive shunt damping methods. This method is based on electrical impedance model and maximizing the dissipated energy at the shunt circuit. four PZT are attached on smart panel for improving performance of transmission noise reduction. 0 prove the concept of piezoelectric smart panels, an acoustic measurement experiment was performed. The smart panels exhibit a good noise reduction in middle and high frequency ranges due to the mass effects of absorbing materials or/and the air gap. The use of piezoelectric smart panel renders noise reduction at resonance frequency. Noise reduction at multiple resonance frequencies is experimentally investigaed.

• Journal of Powder Materials
• /
• v.26 no.1
• /
• pp.45-48
• /
• 2019

Quantum dots (QDs) are an attractive material for application in solar energy conversion devices because of their unique properties including facile band-gap tuning, a high-absorption coefficient, low-cost processing, and the potential multiple exciton generation effect. Recently, highly efficient quantum dot-sensitized solar cells (QDSCs) have been developed based on CdSe, PbS, CdS, and Cu-In-Se QDs. However, for the commercialization and wide application of these QDSCs, replacing the conventional rigid glass substrates with flexible substrates is required. Here, we demonstrate flexible CISe QDSCs based on vertically aligned $TiO_2$ nanotube (NT) electrodes. The highly uniform $TiO_2$ NT electrodes are prepared by two-step anodic oxidation. Using these flexible photoanodes and semi-transparent Pt counter electrodes, we fabricate the QDSCs and examine their photovoltaic properties. In particular, photovoltaic performances are optimized by controlling the nanostructure of $TiO_2$ NT electrodes.

• Current Optics and Photonics
• /
• v.3 no.4
• /
• pp.304-310
• /
• 2019

In this paper, a microstructured, hexagonal-shaped dual-core photonic crystal fiber (PCF) is proposed. The proposed structure has specific optical properties to obtain high birefringence and short coupling length, for different values of structural parameters varied over a wide range of wavelength. The properties are analyzed using a solid core of silica material. The proposed structure is implemented as a polarization splitter with splitting length of 1.9 mm and a splitting ratio of -34.988 dB, at a wavelength of 1550 nm. The obtained bandwidth in one band gap of about 81 nm. The numerical analysis ensures that the performance of the proposed polarization splitter is better than that of existing ones.

• KIPE Magazine
• /
• v.27 no.3
• /
• pp.38-48
• /
• 2022

국내 통신 시장은 4G LTE 통신 상용화 이후 2019년 세계 최초로 5G 통신 상용화를 시작하여 각각의 통신사가 앞다투어 설비 투자를 진행하고 있다. 많은 투자가 진행됨에도 불구하고 통신망의 범위, 낙후 지역에 대한 비활성화로 인하여 소비자의 욕구를 충족시키지 못하고 있는 실정이다. 이러한 소비자의 불만족을 해소시키고자 정부의 투자 독려로 인해 2022-2024년까지 지속적으로 5G 장비 투자가 진행될 예정이다. 5G 통신 장비에는 시스템 장비에 전원을 공급해주는 전원 장치가 필요하다. 최근 통신용 전원 장치는 시스템 용량이 증가함에 따라 고전력 장비가 요구되고 있으며, 추가적으로 탄소 배출과 관련하여 에너지 문제가 대두됨에 따라 소형화 및 고효율의 통신용 전원 장치 개발이 주를 이루고 있다. 이를 위해 WBG(Wide Band-Gap) 소자 및 토폴로지 변경, 열적 최적화 등 다양한 방법을 통해 고밀도, 고효율을 달성하고 있다. 본고는 WBG 소자 중 GaN(Gallium Nitride) 전력 반도체를 이용하여 제작한 전원 장치의 설계에 내한 내용을 소개한다.

• Journal of Ceramic Processing Research
• /
• v.13 no.spc2
• /
• pp.336-340
• /
• 2012

Wide band gap p-type hydrogenated amorphous silicon oxide (a-SiO:H) buffer layer has been used at the interface of transparent conductive oxide (TCO) and hydrogenated amorphous silicon (a-Si:H) p-type layer of a p-i-n type a-Si:H solar cell. Introduction of 5 nm thick buffer layer improves in blue response of the cell along with 0.5% enhancement of photovoltaic conversion efficiency (η). The cells with buffer layer show higher open circuit voltage (Voc), fill factor (FF), short circuit current density (Jsc) and improved blue response with respect to the cell without buffer layer.