• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.2
• /
• pp.404-420
• /
• 2021

In this paper, an automatic system of locating the indoor area with weak or no mobile signal was proposed and demonstrated experimentally by using the Internet of Things (IoT) technology. Nowadays, the technicians of mobile services providers need to go along with numerous heavy equipment to measure and record the mobile signal strength at outside environment. Recently, there are systems proposed to do such measurement at outdoor area by using the IoT technology automatically. However, these works could not be applied in the indoor area since there are difficulties to do the indoor mapping and positioning. In this work, the Bluetooth Low Energy (BLE) was used to tackle these two difficulties. After a proper placement of BLE in the testing site, while the technician walk around with a handheld analyzer, the data can be obtained accordingly for further analysis in the proposed system which includes the construction of floor plan, detection of mobile signal strength and suggestion of indoor base stations. The gift wrapping and centroid algorithms were used during the analysis. The experimental results showed that the proposed system successfully demonstrated the indoor mapping, positioning of weak mobile signal area and suggestion of indoor base stations for the normal rectangular rooms with an area of 100 m² on single floor.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.8
• /
• pp.1132-1140
• /
• 2011

When the offshore wind power plant is planned to construct, it is important for the wind farm site to figure out the distribution of the weak soil layers that might cause subsidence by the impact of the external moment from the wind plant's load and an oscillating wind load. Coring test is the optimistic method to figure out weak soil layers, but this method have some problem such as condition of the in-situ or economical limitation. In order to make up for the weak points in coring test, the researches using the geostatistics methods is actually done. In this study, setting a fixed coastal area that offshore wind plants construct firstly and Estimation of distribution on the thickness of the weak soil layer through the geostatistic method is conducted. The weak soil layer is sorted by result of the Standard penetration test, geostatistic method is used to ordinary kring and sequential gaussian simulation and compared to both method's result. As a results of study, we found that both methods show similar estimations of deep weak soil layer and we could evaluate quantitatively the uncertainty of the result.

• Korean Journal of Mathematics
• /
• v.22 no.2
• /
• pp.235-252
• /
• 2014

In this paper, weak and strong convergence theorems of three step iteration process with errors are established for two weakly inward and non-self asymptotically nonexpansive mappings in Banach spaces. The results obtained in this paper extend and improve the several recent results in this area.

• 건축구조
• /
• v.14 no.4
• /
• pp.79-86
• /
• 2007

Underground space development is more active on the latest date. Currently, we construct an connecting tunnel Euljiro underground shopping-area in seoul. we select DSM, considering geological condition and construction efficiency. The numerical analysis is performed with PENTAGON-3D and MIDAS CIVIL This paper will introduce the Earth Tunnel Method and make an examination possible to apply downtown weak ground.

• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.628-633
• /
• 2004

we studied the structural weak areas of an electric car bogie frame by finite element analysis. The bogie frame under consideration is a part of the standard electric car with aluminium car body. Vertical, torsional. lateral and longitudinal loadings were applied. Numerical results were compared with the experimental results. The two results are in a good agreement.

• Journal of Urban Science
• /
• v.7 no.2
• /
• pp.1-9
• /
• 2018

In this study, Analysis of DRT model and contribustion based on the case of local governments adopting the Demand Responsive Transit(DRT) in order to provide transportation in public transportation service weak area. Based on the case of Yeoju Area, the contribution of the DRT was analyzed. The DRT model was established as a fixed and call type model with taxi and bus transportation. Based on the results of the happy taxi service in Yeoju Area in 2016, the contribution of DRT was analyzed. According to the happy taxi performance of Yeoju city, it was introduced to 27 villages, and operated 4,188 times. And 9,111 people used it and Yeoju Area supported about 53 million Won. The contribution of local governments was analyzed in terms of local government, users, and social aspects. On local government aspects, we analyzed the budget cuts and complaints resolution. On the user aspects, we analyzed waiting time reduction, walking time reduction, travel time reduction, comfort, punctuality, and stability. On social aspects, we analyzed taxi and regional economy activation, and convenience of mobility.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.11a
• /
• pp.107-108
• /
• 2022

In recent years, the construction industry has a tendency to increase of high-rise builidngs. High rise buildings can use limited space efficiently. But High rise buildings have problem that have extremely heavy weight. Various studies are being conducted to reduce the weight of buildings. Although lightweight aggregate is a meterial that can effectively reduce the weight of buildings, the strength of the aggregate itself is weak and the absorption rate is high, so the strength of the ITZ(Interfacial Transition Zone) area is weak. Therefore, it is essential to improve the interfacial area when using lightweight aggregates. In this study, an experiment was conducted to improve the adhesion between the aggregate and cement paste and to strengthen the interfacial area by coating the surface of the lighteight aggregate with Blast Furnace Slag. To confirm the improvement, compressive strength and EIS(Electrochemical Impedance Spectroscopy) measurements were perfromed. Using EIS, the change in electrical resistance of the cement hardened body was confirmed. As a result, it was confirmed that the lightweight aggregate coated on the surface showed highter compressive strength and electrical resistance than the non-coated lightweight aggregate, and that the coating material was filled in the interfacial area and inside the aggregate that helped to strengthen the compresssive strength and higher electrical resistance.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.6
• /
• pp.439-446
• /
• 2011

In this research, enhanced land-cover classification methods using high-resolution satellite image (HRSI) and GIS in terms of practicality and accuracy was proposed. It aims for understanding non-point pollutant origin/loading, assessment the efficiency of rainfall storage/infiltration facilities and sounds water-environment management. The result of applying enhanced land-cover classification methods to the urban region verifies that roof and road area are including various vegetations such as roof garden, flower bed in the median strip and street tree. This accounts for 3% of total study area, and more importantly it was counted as impervious area by GIS alone or conventional indoor work. The feasibility of the method was assessed by applying to rainfall-runoff analysis for three weak rainfall in the range of 7.1-10.5 mm events in 2000, Chiba, Japan. A good agreement between simulated and observed runoff hydrograph was obtained. In comparison, the hydrograph simulated with land-use parameters by the detailed land-use information of 10m grid had an error between 31%~71%, while enhanced method showed 4% to 29%, and showed the improvement particularly for reproducing observed peak and recession flow rate of hydrograph in weak rainfall condition.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.7 no.1
• /
• pp.1-6
• /
• 2007

In this study, we fill a person's shoes human knowledge use a computer fast and simple repetition in architecture design. this study are launched from a assumption that a optimized arrangement spaces are able to measure and gauge. but automatic space arrangement program is first step, we have a value that propose a differential cell space and valuation space and process of optimized space arrangement. the merits of this design process are as follows; 1. this program has a advantage high the building-to-land ratio land and business area in space design. 2.this program can design a economy building and calculate rent benefit and calculate cost of construction. 3. this program can adapt for digital GIS. this program can down cost in labor productivity. 5. a layman can design high level. the weak point of this design process are as follows; 1. the design product is simple box shape. 2. this program has a weak in large area and complicated land shape 3. complex use space design are difficult in this program.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.1
• /
• pp.132-142
• /
• 2000

The objective of this study is to experimentally investigate the noise propagating characteristics, the noise reduction mechanism and the performance of a slotted tube attached at the exit plane of a circular convergent nozzle. The experiment is performed through the systematic change of the jet pressure ratio and the slot length under the condition of two kinds of open area ratios, 25% and 51%. The open area ratio calculated by the tube length equivalent for the slot length is defined as the ratio of the total slot area to the surface area of a slotted tube. The experimental results for the near and far field sound, the visualization of jet structures and the static pressure distributions in the jet passing through a slotted tube are presented and explained in comparison with those for a simple tube. The propagating characteristics of supersonic jet noises from the slotted tube is closely connected with the slot length rather than the open area ratio, and its propagating pattern is similar to the simple tube. It is shown that the slotted tube has a good performance to suppress the shock-associated noise as well as the turbulent mixing noise in the range of a limited jet pressure and slot dimension. The considerable suppression of the shock‘associated noise is mainly due to the pressure relief caused by the high-speed jets passing through the slots on the tube. Both the strength of shock waves and the interval between them in a jet plume are decreased by the pressure relief. Moreover, the pressure relief is divided into the gradual and the sudden relief depending upon the open area ratio of the slotted tube. Consequently, the shock waves in a jet plume are also changed by the type of pressure relief. The gradual pressure relief caused by the slotted tube with the open area ratio 25% generates the weak oblique shock waves. On the contrary, the weak normal shock waves appear due to the sudden pressure relief caused by the slotted tube with the open area ratio 51%.