• Journal of Digital Convergence
• /
• v.19 no.3
• /
• pp.245-251
• /
• 2021

This study was to investigate the effect of the new surface treatment method of zirconia on the shear bond strength with resin cement. The zirconia specimens were classified according to the surface treatment. CON: non-treatment, HF: 10 minutes exposure to 9% HF, ZS15: Apply 15% ZrO2 slurry, ZS30: Apply 30% ZrO2 slurry, ZS50: Apply 50% ZrO2 slurry. The resin cement was layered on the surface treated zirconia, and the shear bond strength between the zirconia and the resin cement was measured after thermo-cycling. The statistical methods for shear bond strength were Kruskal-Wallis test, Mann-Whitney U test, and Bonferroni correction(α=.05/10=.005). ZS15, ZS30, and ZS50 groups treated with zirconia slurry showed higher shear bond strength than CON and HF groups(p<.05/10=.005). Within the limits of this study, the surface treatment using zirconia slurry increased the shear bond strength with resin cement. The new surface treatment method complements and improves the limitations of the adhesion of zirconia, so that various clinical applications of zirconia can be expected.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.36 no.4
• /
• pp.242-253
• /
• 2020

Purpose: The aim of this study was to compare the accuracy of dies fabricated using 3D printing system to conventional method and to evaluate overall volumetric changes by arranging the superimposed surfaces. Materials and Methods: A mandibular right first molar from a dental model was prepared, scanned and fabricated with composites of polyetherketoneketone (PEKK). Master dies were classified into 4 groups. For the conventional method, the impression was taken with polyvinylsiloxane and the impression was poured with Type IV dental stone. For the 3D printing, the standard die was scanned and converted into models using three different 3D printers. Each of four methods was used to make 10 specimens. Scanned files were superimposed with the standard die by using 3D surface matching software. For statistical analysis, Kruskal-Wallis test and Mann-Whitney U test were done (P < 0.05). Results: Compared to the standard model, the volumetric changes of dies fabricated by each method were significantly different except the models fabricated by conventional method and 3D printer of Stereolithography (P < 0.05). The conventional dies showed the lowest volumetric change than 3D printed dies (P < 0.05). 3D printed dies fabricated by Stereolithography showed the lowest volumetric change among the different 3D printers (P < 0.05). Conclusion: The conventional dies were more accurate than 3D printed dies, though 3D printed dies were within clinically acceptable range. Thus, 3D printed dies can be used for fabricating restorations.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.37 no.4
• /
• pp.199-208
• /
• 2021

Purpose: The purpose of this study was to compare and evaluate the masking ability of three types of high translucent zirconia according to the various thicknesses and backgrounds. Materials and Methods: Using three types of high-translucency zirconia (Ceramill zolid fx white, Ceramill zolid ht+ white, Ceramill zolid ht+ preshade A2), 10 cylindrical specimens were fabricated in 10mm diameter and each with four thicknesses (0.6 mm, 1.0 mm, 1.5 mm, 2.0 mm), respectively by CAD/CAM method. The background was 10 mm in diameter and 10 mm in thickness. A1, A2, A3 flowable resin backgrounds, blue-colored core resin background, and Ni-Cr alloy background were prepared, and black, white backgrounds provided by the spectrophotometer manufacturer (x-rite, Koblach, Austria) were used. zirconia specimens and the background specimen were stacked to measure L, a^*, b^* with Spectrophotometer (Color i5, x-rite, Koblach, Austria) and the ΔE value with the other background is calculated. The Calculated mean ΔE values were compared based on perceptibility threshold 1.0 and acceptability threshold 3.7. Nonparametric tests such as Kruskal-Wallis test were performed to verify statistical significance (α = 0.05). Results: There was a significant difference in the mean ΔE value according to the zirconia type, background and thickness change (P = 0.000). Conclusion: According to the results of this study, the pre-colored high-translucent zirconia can obtain the desired zirconia shade when it is restored on teeth, composite resins, and abutments except for the blue resin core.

• Journal of the Korea Convergence Society
• /
• v.13 no.3
• /
• pp.91-103
• /
• 2022

This study surveyed 101 occupational therapists who were performing occupational therapy before and after the COVID-19 outbreak to compare their perceptions and performance of hand washing, use of personal protective equipment, and infection control of surrounding environment. Mann-Whitney U test, Kruskal wallis H test, Wilcoxon signed-rank test, Pearson's correlation coefficient were used analyzed. As a result, it was confirmed that they received better infection control education after the outbreak compared to before the outbreak of COVID-19, and their experience with infectious diseases was lower. In addition, it was found that the perception and performance of infection control in hand washing, personal protective equipment, and surrounding environment cleaning were improved after the outbreak compared to before the outbreak of COVID-19. However, to this day, hand washing for more than 40 seconds in running water recommended by the Korea Centers for Disease Control and Prevention, cleaning the treatment room, and disinfection of treatment tools are still in need of improvement. Through this study, infection control education should be repeated regularly to minimize the occurrence of infectious diseases, and It will be a basic data that can be used in infection control education and follow-up studies for occupational therapists in the future.

• Journal of Industrial Convergence
• /
• v.19 no.6
• /
• pp.101-108
• /
• 2021

This descriptive study was conducted to identify the relationship between knowledge of stroke and stroke-related health promoting lifestyle among nursing students. Data were collected from September 21 to 26, 2020, from 182 nursing students. Data were self-reported using a structured questionnaire. Data were analyzed using independent t-test, one-way ANOVA, and Kruskal-Wallis test. The mean stroke knowledge score of the participants was 14.97±3.13. The mean score on knowledge of stroke risk factors was 8.69±1.98, and that for knowledge of stroke warning signs was 5.43±1.31. The mean health promoting lifestyle score was 2.93±0.47. Knowledge of risk factors according to general and health-related characteristics showed significant differences in age and money on hand. Knowledge of warning signs according to general and health-related characteristics showed significant differences in the family history of stroke. Health promoting lifestyle to general and health-related characteristics showed significant differences in religion, satisfaction with major, subjective health status, and body mass index. In conclusion, nursing students had high knowledge of stroke, but stroke-related health promoting were not.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.5
• /
• pp.443-452
• /
• 2021

College students face serious difficulties while seeking jobs, leading to a high degree of stress, which is thought to affect their attitude towards smoking. The purpose of this study was to identify the relationship between hardiness, job-seeking stress, and the attitude towards smoking among students, and to further identify the factors influencing smoking attitude. Data were collected using a structured questionnaire administered to 145 students. Data analysis was performed using the SPSS program, t-test, ANOVA, Kruskal Wallis test, Pearson's Correlation Coefficients, and hierarchical multiple regression analysis. Smokers constituted 22.1% of the sample. The study showed that smoking attitudes varied according to the smoking status (H=28.26, p<.001). The smoking attitude was seen to be desirable in the high group (t=-3.27, p=.001) and low job-seeking stress group (t=4.40, p<.001). There was a positive correlation between hardiness and smoking attitude (r=.18, p=.028). There was a negative correlation between job-seeking stress and smoking attitude (r=-.28, p=.001). Also, the factors affecting the smoking attitude were non-smoker respondent (β=.50, p<.001), job-seeking stress (β=-.23, p=.015), former smoker respondent (β=.22, p=.016) and the explanatory power was 24.3%. Therefore, school and health public center counseling and employment support programs need to help students manage and cope with stressful situations to change their attitude towards smoking in a desirable direction.

• The Journal of the Korea Contents Association
• /
• v.21 no.12
• /
• pp.182-189
• /
• 2021

A study was conducted to identify the general characteristics of some dental hygiene students and to identify the factors affecting the achievement goal orientation and academic achievement according to the teaching method selection for increase the academic achievement of the subject in the special education environment caused by the COVID-19. In the second semester of 2020, a survey was conducted on 122 students of G University's dental hygiene department located in Gwangju, and the general characteristics and achievement goal orientation were surveyed. Academic achievement has used the midterm and final exam scores and the collected data were analyzed using Kruskal-Wallis test, Mann-Whitney U test, Pearson's correlation test, Multiple Linear Regrission. According to the general characteristics, there was a significant difference in subject understanding, subject interest, and subject satisfaction, and learning satisfaction showed a strong correlation with the completion goal tendency. There was a significant difference in academic achievement according to the class choice, and the factor that influenced the academic achievement was the case that the teaching method was chosen face-to-face. Therefore, in order to improve learners' academic achievement, it is necessary to increase the proportion of face-to-face classes and to establish an effective lesson plan that can increase the degree of subject understanding, subject interest, and subject satisfaction.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.49 no.3
• /
• pp.329-339
• /
• 2022

The purpose of this study was to compare the palatal dimensions (volume, width, length, and height) in different malocclusions (Class I, II, and III) in mixed dentition using a three-dimensional digital scanner. The study was performed on 30 selected casts from 1400 casts that were taken at the Department of Pediatric Dentistry at Dankook University. Casts consisted of Class I, II, and III malocclusion groups in Hellman's dental age IIIA. The mean age was 8 years and 6 months ± 11 months. Each cast was scanned by three-dimensional digital scanner, Medit T710 (Medit, Seoul, Korea), and shaped into the three-dimensional image and calculated palatal dimensions using the Plan T program (SMD solution, Seoul, Korea). The values were statistically compared and evaluated by Kruskal-Wallis followed by the Mann-Whitney test. According to our results, subjects with Class II malocclusion showed lower palatal width and longer palatal length compared to those with Class I and Class III. For palatal height, Class III malocclusion subjects in mixed dentition exhibited a larger number than Class II and Class I. Lastly, for palatal volume, compared to other malocclusions, Class III showed higher results; however, there were no significant differences. The form of the palate differs in types of malocclusions and understanding of these differences is important in clinical significance. Based on this study, the understanding of the relationship between the shape of the palate and the skeletal pattern provides useful information about orthodontic treatment plans, early diagnosis of malocclusion, and morphological integration mechanisms. Orthopedic treatment in the maxilla should be performed during early and intermediate mixed dentition to enhance treatment efficiency.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.49 no.3
• /
• pp.241-252
• /
• 2022

The purpose of this study was to evaluate the relationship between sella turcica morphology and delayed dental age. In total, 389 participants under 16 years old were selected. Dental age was evaluated by the Demirjian method and age discrepancy (AD), the value subtracted from dental age to chronological age, was calculated. The participants were divided into 8 groups based on the sella turcica type. Bridging ratio (BR) was defined as interclinoid distance divided by sella turcica length to determine the degree of sella turcica bridging (STB) and the participants were classified into 4 groups by BR. The data were statistically analyzed using the Kruskal Wallis test and the Mann Whitney test. Some groups with sella turcica abnormality showed lower AD than that of the normal group and the AD differences varied from 4 months to 1.3 year. As the STB severity increased, AD decreased. AD differences varied from 7 months to 1.19 year. No distinct differences were observed in sella turcica type and STB groups according to sex. The results indicate that sella turcica morphology is associated with delayed dental age. Sella turcica can be used as a supplementary indicator to predict dental development.

• Korean Journal of Ichthyology
• /
• v.34 no.2
• /
• pp.73-85
• /
• 2022

The cynoglossid fishes are popular for food in the world including Korea, China and Japan, and among them, Paraplagusia japonica lives all over the sea of Korea. In order to establish appropriate management measure, it is essential to clarify population structure of P. japonica from the morphological and molecular perspectives. We collected a total of 132 individuals of P. japonica from six localities in Korea between 2008 and 2021. Canonical discriminant analysis results showed that the West Sea population (Incheon) slightly differed from the South (Tongyeong, Busan) and East Sea populations (Pohang, Donghae, Sokcho). Similar results were also shown in Kruskal-Wallis test of meristic characters. Furthermore, neighbor-joining and maximum-likelihood trees based on 849 base pairs of mitochondrial DNA cytochrome b sequences showed that P. japonica was divided into two lineages (designated as A and B) with a high significance (Φ_st=0.0781, P<0.001). Interestingly, however, the two lineages in the admixture area (South-East Sea) were not different in morphological characters. Our results suggest that P. japonica had undergone differentiated history during the Late Pleistocene, but secondary contact may occur at the admixture area.