Browse > Article
http://dx.doi.org/10.14400/JDC.2021.19.3.245

Effect of the New Surface Treatment Method of Zirconia on the Shear Bond Strength with Resin Cement  

Cho, Won-Tak (Department of Prosthodontics, Dental and Life Sciences Institute, Education and Research Team for Life Science on Dentistry, School of Dentistry, Pusan National University)
Bae, Ji-Hyeon (PNUADD Co, Ltd)
Choi, Jae-Won (School of Dentistry, Pusan National University)
Publication Information
Journal of Digital Convergence / v.19, no.3, 2021 , pp. 245-251 More about this Journal
Abstract
This study was to investigate the effect of the new surface treatment method of zirconia on the shear bond strength with resin cement. The zirconia specimens were classified according to the surface treatment. CON: non-treatment, HF: 10 minutes exposure to 9% HF, ZS15: Apply 15% ZrO2 slurry, ZS30: Apply 30% ZrO2 slurry, ZS50: Apply 50% ZrO2 slurry. The resin cement was layered on the surface treated zirconia, and the shear bond strength between the zirconia and the resin cement was measured after thermo-cycling. The statistical methods for shear bond strength were Kruskal-Wallis test, Mann-Whitney U test, and Bonferroni correction(α=.05/10=.005). ZS15, ZS30, and ZS50 groups treated with zirconia slurry showed higher shear bond strength than CON and HF groups(p<.05/10=.005). Within the limits of this study, the surface treatment using zirconia slurry increased the shear bond strength with resin cement. The new surface treatment method complements and improves the limitations of the adhesion of zirconia, so that various clinical applications of zirconia can be expected.
Keywords
Resin cement; Shear bond strength; Zirconia; Zirconia slurry; Surface treatment;
Citations & Related Records
연도 인용수 순위
  • Reference
1 J. D. Wong, C. Y. Kei Lung, J. K. Tsoi & J. P. Matinlinna. (2014). Effects of a zirconate coupling agent incorporated into an experimental resin composite on its compressive strength and bonding to zirconia. J Mech Behav Biomed Mater, 29, 171-176. DOI : 10.1016/j.jmbbm.2013.09.007   DOI
2 A. Casucci, E. Osorio, F. Monticelli, M. Toledano, C. Mazzitelli & M. Ferrari. (2009). Influence of different surface treatments on surface zirconia frameworks. J Dent, 37(11), 891-897. DOI : 10.1016/j.jdent.2009.06.013   DOI
3 T. Sriamporn, N. Thamrongananskul, C. Busabok, S. Poolthong, M. Uo & J. Tagami. (2014). Dental zirconia can be etched by hydrofluoric acid. Dent Mater J, 33(1), 79-85. DOI : 10.4012/dmj.2013-243   DOI
4 P. C. Guess, W. Att & J. R. Strub. (2012). Zirconia in fixed implant prosthodontics. Clin Implant Dent Relat Res, 14(5), 633-645. DOI : 10.1111/j.1708-8208.2010.00317.   DOI
5 Y. Josset, Z. Oum'Hamed, A. Zarrinpour, M. Lorenzato, J. J. Adnet & D. Laurent-Maquin. (1999). In vitro reactions of human osteoblasts in culture with zirconia and alumina ceramics. J Biomed Mater Res, 47(4), 481-493. DOI:10.1002/(sici)1097-4636(19991215)47:4<481::aid-jbm4>3.0.co;2-y   DOI
6 A. Scarano, F. Di Carlo, M. Quaranta & A. Piattelli. (2003). Bone response to zirconia ceramic implants: an experimental study in rabbits. J Oral Implantol, 29(1), 8-12. DOI:10.1563/1548-1336(2003)029<0008:BRTZCI>2.3.CO;2   DOI
7 CP. Christel, A. Meunier, M. Heller, J. Torre & C. Peille. (1989). Mechanical properties and short-term in-vivo evaluation of yttrium-oxide-partially-stabilize d zirconia. J Biomed Mater Res, 23(1), 45-61. DOI : 10.1002/jbm.820230105   DOI
8 T. A. Sulaiman, A. A. Abdulmajeed, K. Shahramian & L. Lassila. (2017). Effect of different treatments on the flexural strength of fully versus partially stabilized monolithic zirconia. J Prosthet Dent, 118(2), 216-220. DOI : 10.1016/j.prosdent.2016.10.031   DOI
9 R. Luthardt et al. (2002). Reliability and properties of ground Y-TZP-zirconia ceramics. J Dent Res, 81(7), 487-491. DOI : 10.1177/154405910208100711   DOI
10 N. Nordahl, P. V. von Steyern & C. Larsson. (2015). Fracture strength of ceramic monolithic crown systems of different thickness. J Oral Sci, 57(3), 255-261. DOI : 10.2334/josnusd.57.255   DOI
11 A. Piwowarczyk, H. C. Lauer & J. A. Sorensen. (2005). The shear bond strength between luting cements and zirconia ceramics after two pre-treatments. Oper Dent, 30(3), 382-388.
12 M. Gargari, F. Gloria, E. Napoli & A. M. Pujia. (2011). Zirconia: cementation of prosthetic restorations. Literature review. Oral Implantol, 3(4), 25-29.
13 M. B. Blatz, A. Sadan & M. Kern. (2003). Resin-ceramic bonding: a review of the literature. J Prosthet Dent, 89(3), 268-274. DOI : 10.1067/mpr.2003.50   DOI
14 A. M. Diaz-Arnold, M. A. Vargas & D. R. Haselton. (1999). Current status of luting agents for fixed prosthodontics. J Prosthet Dent, 81(2), 135-141. DOI : 10.1016/s0022-3913(99)70240-4   DOI
15 M. B. Blatz, G. Chiche, S. Holst, A, Sadan. (2007). Influence of surface treatment and simulated aging on bond strengths of luting agents to zirconia. Quintessence Int, 38(9), 745-753.
16 D. Senyilmaz, W. M. Palin, A. Shortall & F. Burke. (2007). The effect of surface preparation and luting agent on bond strength to a zirconium-based ceramic. Oper Dent, 32(6), 623-630. DOI : 10.2341/07-14   DOI
17 Y. Okutan, M.T. Yucel, T. Gezer & M. B. DONMEZ. (2018). Effect of airborne particle abrasion and sintering order on the surface roughness and shear bond strength between Y-TZP ceramic and resin cement. Dent Mater J, 38(2), 241-249. DOI : 10.4012/dmj.2018-051   DOI
18 P. Margne, M. P. G. Paranhos & L. H. Burnett Jr. (2010). New zirconia primer improves bond strength of resin-based cements. Dent Mater, 26(4), 345-352. DOI : 10.1016/j.dental.2009.12.005   DOI
19 J. Y. Thompson, B. R. Stoner, J. R. Piascik, R. Smith. (2011). Adhesion/cementation to zirconia and other non-silicate ceramics: where are we now?. Dent Mater, 27(1), 71-82. DOI : 10.1016/j.dental.2010.10.022   DOI
20 S. S. Atsu, M. A. Kilicarslan, H. C. Kucukesmen & P. S. Aka. (2006). Effect of zirconium-oxide ceramic surface treatments on the bond strength to adhesive resin. J Prosthet Dent, 95(6), 430-436. DOI : 10.1016/j.prosdent.2006.03.016   DOI
21 Y. Tsuo, K. Yoshida & M. Atsuta. (2006). Effects of alumina-blasting and adhesive primers on bonding between resin luting agent and zirconia ceramics. Dent Mater J, 25(4), 669-674. DOI : 10.4012/dmj.25.669   DOI
22 M. Ozcan, H. Nijhuis & L. F. Valandro. (2008). Effect of various surface conditioning methods on the adhesion of dual-cure resin cement with MDP functional monomer to zirconia after thermal aging. Dent Mater J, 27(1), 99-104.   DOI
23 H. Lüthy, O. Loeffel, C. H. Hammerle. (2006). Effect of thermocycling on bond strength of luting cements to zirconia ceramic. Dent Mater, 22(2), 195-200. DOI : 10.1016/j.dental.2005.04.016   DOI
24 M. Kern & S. M. Wegner. (1998). Bonding to zirconia ceramic: adhesion methods and their durability. Dent Mater, 14(1), 64-71. DOI : 10.1016/s0109-5641(98)00011-6   DOI
25 R. Lu, J. K. Harcourt & M. J. Tyas. (1992). An investigation of the composite resin/porcelain interface. Aust Dent J, 37(1), 12-19. DOI : 10.1111/j.1834-7819.1992.tb00827.x   DOI
26 O. Kumbuloglu, L. V. Lassila, A. User & P. K. Vallittu. (2006). Bonding of resin composite luting cements to zirconium oxide by two air-particle abrasion methods. Oper Dent, 31(2), 248-255. DOI : 10.2341/05-22   DOI
27 M Ozcan. (2002). The use of chairside silica coating for different dental applications: a clinical report. J Prosthet Dent, 87(5), 469-472. DOI : 10.1067/mpr.2002.124365   DOI
28 H. R. Sarmento et al. (2014). Influence of air-particle deposition protocols on the surface topography and adhesion of resin cement to zirconia. Acta Odontol Scand, 72(5), 346-353. DOI : 10.3109/00016357.2013.837958   DOI
29 G. Akgungor, S. Deniz & A Murat. (2008). Influence of different surface treatments on the short-term bond strength and durability between a zirconia post and a composite resin core material. J Prosthet Dent, 99(5), 388-399. DOI : 10.1016/S0022-3913(08)60088-8.   DOI
30 Y. B. Jo, J. J. Ahn, S. H. Lee, T.S. Park & J. B. Huh. (2014). The Effect of ZrO2 Slurry Application to the Pre-sintered Zirconia Surface on Bonding Strength. IMPLANTOLOGY, 24(2), 76-82. DOI : 10.32542/implantology.202008   DOI
31 S. Roedel, J. Mesquita-Guimaraes, J. C. Souza, F. S. Silva, M. C. Fredel & B. Henriques. (2019). Production and characterization of zirconia structures with a porous surface. Mater Sci Eng C Mater Biol Appl, 101, 264-273. DOI : 10.1016/j.msec.2019.03.087   DOI
32 S. Roedel, J. C. Souza, F. S. Silva, J. Mesquita-Guimaraes, M. C. Fredel & B. Henriques. (2018). Optimized route for the production of zirconia structures with controlled surface porosity for biomedical applications. Ceramics International, 44(11), 12496-12503. DOI : 10.1016/j.ceramint.2018.04.042   DOI