• The Journal of Churna Manual Medicine for Spine and Nerves
• /
• v.3 no.1
• /
• pp.37-48
• /
• 2008

Objective : In treatment of lumbar spine herniation of nucleus pulpous, the different result in accordance with difference of sex, age, medical history, part, or type. Methods : After 49 patients who were diagnosed as HNP of L-spine were grouped by sex, age, medical history, part, or type, they were compared and analyzed on the basis of difference between measuring VAS and ODI as they were hospitalized and as they were discharged. Results : 1. In terms of differences by gender, males' average degree of VAS improvement was 63.92 and females' average degree of VAS improvement was 59.8. Also, Males' average ODI improvement index was 12.36 and females' average ODI improvement index was 12.5. 2. In terms of differences by age, Teens recorded highest degree of VAS improvement and ODI improvement index. 3. In terms of differences by medical history, Most acute or acute patients showed higher degree of VAS improvement and ODI improvement index than subacute or chronic patients. 4. There were no significant distinguishing markscomparing between one diseased part and other. 5. As the research that focused on different type, Extrusion type had better improvement by medical treatment than Protrusion type. Conclusion : This research drew the result as above, but recognizable statistical relation could not be found in the result. Therefore there needs much sustainable research to deduce meaningful result.

• Journal of radiological science and technology
• /
• v.14 no.2
• /
• pp.15-21
• /
• 1991

Experiment was conducted on the image quality and exposure dose following replacement of $CaWO_4$ system screen BH-III and BX-III which have so far been used for high-voltage hard-radiation quality radiography, with rare earth system screen KO750, combined with high contrast film SRH, while additional filter was altered, Cu 0.8 mm+Al 1.4 mm(HVL : Al 8.8 mm), Cu 1.3 mm+Al 1.0 mm(HVL : Al 10.6 mm) and Cu 1.8 mm+Al 1.5 mm(HVL : Al 11.4 mm). AS a result, visual evaluation did not detect extreme changes in image quality under the respective condition(HVL : $Al\;8.8\;mm{\sim}Al\;11.4\;mm$). It was noted, however, that surface exposure dose declined with an increase in the thickness of the additional filter, as it was $18.9\;{\mu}Gy$ at HVL Al 8.8 mm, $17.5\;{\mu}Gy$ at Al 10.6 mm and $15.7\;{\mu}Gy$ at Al 11.4 mm. Considering the limited rating of X-ray equipment and wear of machinery, however, the range of $Cu\;1.3\;mm{\sim}1.8\;mm+Al\;1.0\;mm{\sim}1.5\;mm(1/16\;VL{\sim}1/32\;VL)$ seemed to be a limit.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.41 no.3
• /
• pp.83-89
• /
• 2018

In the SW industry, the diversification of global markets and technology trends are changing due to the emergence of new services, and IT companies are in need of strategic change different from the previous one. In this study, SWOT analysis was performed by extracting the internal environmental factors and external environmental factors through the previous studies to improve the project performance competence of small IT companies, and the SWOT Matrix was reconstructed through the pairwise comparison. Based on this, the purpose of this research was to propose the project performance competency improvement plans for small IT companies based on importance and priority, and the following four strategies were derived from the result of SWOT-AHP analysis. SO strategy was drawn in direction to invest R & D in new SW industry to enhance technology competitiveness of SMEs in order to develop SMEs, and in order to secure competitiveness of SW industry, WO strategy is drawn the cultivation of professional technical manpower through SW policy. ST Strategy presented technical management through SW system improvement policy to improve SW environment, and WT Strategy presented awareness training on the construction and necessity of project management system construction. Using the strategies presented in this study, it is expected that the managers of small IT firms will be presented as references to measure the performance competence factors of current organizations and company organizations.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.23 no.3
• /
• pp.65-77
• /
• 1981

The Compaction of fill dam is very important for increasing of the safty of dam. Vibration roller is used for the compaction of pervious materials such as sand and gravel. The principal objects of this study are to give a comstruction criteria of vibration roller and to find out the relationship between dry density and permeabity of pervious soil after compaction. The results in this study are summerized as follows. 1.The relationship between maximum dry density (Υdmax) and optimum moisture content(Wo) of modified compaction test is Υdmax=2. 74-0. 064w0 2.The maximum dry density decrease with increasing fine particle(n) and the relative formular is n==ae-brdmax 3.The maximum dry density is influenced more by passing rate of number 200 sieve than 4 sieve. 4.The coefficient of permeability are similar when the degrees of compaction are equal even though the spreading thickness of soil are different. 5.The coefficient of permeability(K)is greatly influence by fine particle passing number 200 sieve, and those relationship is inversely proportionate. 6.The K values of pervious soil are from 10-0 cm/sec to 10-4 cm/sec when degree of compaction by a modified method is from 90 to 95percent. 7.The coarser material is little influenced on the permeability with different density. 8.The increasing rate of permeability with decreasing degree of compaction is more influened by fine pacticle than number 200 sieve. When degree of compaction decrease from 100 percent to 90 percent the K values of SM and GM increase about 20 times but GW increase 6 times only. 9.The effect of compaction by vibration roller is greatly influenced by 6 passes and the increasing rate of the effect is decraased at 8 passes. 10. In order to get the degree of compaction of 95 percent or more, 6 to 8 passes of roller are generall required with 30 cm thickeness of soil for 4.5 ton to 6.5 ton vibration roller and 7 to 8 passes is required with 50cm thickness for 8 to 12 ton roller.

• Journal of Species Research
• /
• v.12 no.spc2
• /
• pp.7-14
• /
• 2023

Several genera belonging to the family Acetobacteraceae were generally considered to be acetic acid bacteria (AAB) which produce acetic acid from alcohols using an oxidation pathway. Some species of the family Acetobacteraceae have been of interest to the industry due to their capability to produce vinegar. In 2018-2020, several bacterial strains were isolated from plants, fruits and vinegar in various regions of the Republic of Korea. Based on the 16S rRNA gene sequences, seven species classified into the family Acetobacteraceae were found to be ones unrecorded in the Republic of Korea, including two Asaia species, one Gluconacetobacter species, three Gluconobacter species and one Komagataeibacter species. As a result, we report Asaia lannensis AF11C3 (=KACC 22050) isolated from plant Chrysanthemum zawadskii, Asaia platycodi AF15C2 (=KACC 22051) isolated from plant Isodon inflexus, Gluconacetobacter liquefaciens C23-3 (=KACC 22064) isolated from fruit of Pyrus pyrifolia, Gluconobacter cerinus BGF2-R2 (=KACC 22053) isolated from fruit of Prunus armeniaca, Gluconobacter kondonii FR39A4 (=KACC 22388) isolated from persimmon fruit, Gluconobacter thailandicus FR36C4 (=KACC 22057) isolated from fruit of Pseudocydonia sinensis and Komagataeibacter melaceti SPV-2 (=KACC 22058) isolated from potato vinegar.

• Membrane Journal
• /
• v.21 no.1
• /
• pp.22-29
• /
• 2011

During the maintenance, repair and replacement process of circuit breaker, $SF_6$ reacted with input air in arc discharge, which led to the production of by-product gases (eg, $N_2$, $O_2$, $CF_4$, $SO_2$, $H_2O$, HF, $SOF_2$, $CuF_2$, $WO_3$). Among these various by-product gases, $N_2$, $O_2$, $CF_4$ is major component. Therefore, the effective separation process is necessary to recycle the $SF_6$ gas from the mixture gas containing $N_2$, $O_2$, $CF_4$. In this study, the membrane separation process was applied to recycle the $SF_6$ gas from the mixture gas containing $N_2$, $O_2$, $CF_4$. The concentration of $SF_6$ gas in gas produced from the electric power industry is over than 90 vol%. Therefore, we made the simulated gas containing $N_2$, $O_2$, $CF_4$, $SF_6$ which the concentration of $SF_6$ gas is minimum 90 vol%. From the results of membrane separation process of $SF_6$ gas from $N_2$, $O_2$, $CF_4$ $SF_6$ mixture gases, PSF membrane shown the highest recovery efficiency 92.7%, in $25^{\circ}C$ and 150 cc/min of retentate flow rate. On the other hand, PC membrane shown the highest recovery efficiency 74.8%, in $45^{\circ}C$ and 150 cc/min of retentate flow rate. Also, the highest rejection rate of $N_2$, $O_2$, $CF_4$ is 80, 74 and 58.9% seperately in the same operation condition of highest recovery efficiency. From the results, we supposed the membrane separation process as the effective $SF_6$ separation and recycle process from the mixture gas containing $N_2$, $O_2$, $CF_4$, $SF_6$.

• Journal of the Korean Society of Radiology
• /
• v.9 no.1
• /
• pp.39-45
• /
• 2015

$La_2W_3O_{12}:Eu^{3+}$ phosphors were prepared by solid state reaction method. The crystal structure was characterized by XRD pattern and ICSD card (78180). Luminescence properties of $La_2W_3O_{12}:Eu^{3+}$ are investigated by optical and laser-excitation spectroscopy in which emission and excitation spectra and time-resolved spectra are measured. The 1 mol % $Eu^{3+}$-doped $La_2W_3O_{12}$ phosphor exhibits broad excitation band peaking at 286 nm due to the ligand-to-metal charge transfer transition. The excitation lines due to the $^7F_0{\rightarrow}{^5D_4},{^5D_4},{^5L_6},{^5G_4},{^5D_3},{^5D_2}$ transitions of $Eu^{3+}$ are observed in the wavelength region 350-500 nm. The strong line emission is observed at 618 nm corresponding to the due to the $^5D_0{\rightarrow}^7F_2$ transition. The lifetime of 618 nm emission decreases with increasing temperature as 7 K ($114{\mu}s$), 100 K ($94{\mu}s$), 200 K ($10{\mu}s$) and 300 K ($0.5{\mu}s$).

• Journal of radiological science and technology
• /
• v.38 no.3
• /
• pp.213-220
• /
• 2015

This research was study the accuracy of three-dimensional stereotactic breast biopsy, using a core Needle Biopsy and to assess the accuracy of Stereotactic biopsy and Sono guided biopsy. Using Stereotactic QC phantom to measure the accuracy of the 3D sterotactic machine. CT Scan and equipment obtained in the measured X, Y, Z and compares the accuracy of the length. Using Agar power phantom compare the accuracy of the 3D sterotactic machine and 2D ultrasound machine. Z axis measured by the equipment to compare the accuracy and reliability. Check the accuracy by using visual inspection and Specimen Medical application phantom. The accuracy of the 3D sterotactic machine measured by Stereotactic QC phantom was 100%. Accuracy as compared to CT, all of X, Y, Z axis is p > 0.05. The accuracy of the two devices was 100% as measured by Agar powder phantom. There was no difference between t he t wo d evices as C T and p > 0.05. 3D sterotactic machine of the ICC was 0.954, 2D ultrasound machine was 0.785. 2D ultrasound machine was different according to the inspector. Medical application phantom experiments in 3D sterotactic machine could not find the Sliced boneless ham. 2D ultrasound machine has not been able to find a small chalk powder group. The reproducibility of the three-dimensional stereotactic breast biopsy was better than effect of Sono guided biopsy.

• Korean Journal of Mineralogy and Petrology
• /
• v.36 no.3
• /
• pp.185-197
• /
• 2023

The Gubong Au-Ag deposit consists of eight lens-shaped quartz veins. These veins have filled fractures along fault zones within Precambrian metasedimentary rock. This has been one of the largest deposits in Korea, and is geologically a mix of orogenic-type and intrusion-related types. Korea Mining Promotion Corporation drilled into a quartz vein (referred to as the No. 6 vein) with a width of 0.9 m and a grade of 27.9 g/t Au at a depth of -728 ML by drilling (No. 90-12) in the southern site of the deposit, To further investigate the potential redevelopment of the No. 6 vein, another drilling (No. 04-1) was carried out in 2004. In 2004, samples (wallrock, wallrock alteration and quartz vein) were collected from the No. 04-1 drilling core site to study the occurrence and chemical composition of Ti-bearing minerals (ilmenite, rutile). Rutile from mineralized zone at a depth of -275 ML occur minerals including K-feldspar, biotite, quartz, calcite, chlorite, pyrite in wallrock alteration zone. Ilmenite and rutile from ore vein (No. 6 vein) at a depth of -779 ML occur minerals including white mica, chlorite, apatite, zircon, quartz, calcite, pyrrhotite, pyrite in wallrock alteration zone and quartz vein. Based on mineral assemblage, rutile was formed by hydrothermal alteration (chloritization) of Ti-rich biotite in the wallrock. Chemical composition of ilmenite has maximum values of 0.09 wt.% (HfO₂), 0.39 wt.% (V₂O₃) and 0.54 wt.% (BaO). Comparing the chemical composition of rutile at a depth -275 ML and -779 ML, Rutile at a depth of -779 ML is higher contents (WO₃, FeO and BaO) than rutile at a depth of -275 ML. The substitutions of rutile at a depth of -275 ML and -779 ML are as followed : rutile at a depth of -275 ML Ba²⁺ + Al³⁺ + Hf⁴⁺ + (Nb⁵⁺, Ta⁵⁺) ↔ 3Ti⁴⁺ + Fe²⁺, 2V⁴⁺ + (W⁵⁺, Ta⁵⁺, Nb⁵⁺) ↔ 2Ti⁴⁺ + Al³⁺ + (Fe²⁺, Ba²⁺), Al³⁺ + V⁴⁺+ (Nb⁵⁺, Ta⁵⁺) ↔ 2Ti⁴⁺ + 2Fe²⁺, rutile at a depth of -779 ML 2 (Fe²⁺, Ba²⁺) + Al³⁺ + (W⁵⁺, Nb⁵⁺, Ta⁵⁺) ↔ 2Ti⁴⁺ + (V⁴⁺, Hf⁴⁺), Fe²⁺ + Al³⁺ + Hf ⁴⁺ + (W⁵⁺, Nb⁵⁺, Ta⁵⁺) ↔ 2Ti⁴⁺ + V⁴⁺ + Ba²⁺, respectively. Based on these data and chemical composition of rutiles from orogenic-type deposits, rutiles from Gubong deposit was formed in a relatively oxidizing environment than the rutile from orogenictype deposits (Unsan deposit, Kori Kollo deposit, Big Bell deposit, Meguma gold-bearing quartz vein).

• Economic and Environmental Geology
• /
• v.35 no.3
• /
• pp.179-189
• /
• 2002

The Geology of the Shizhuyuan W-Sn-Bi-Mo deposits, situated 16 Ian southeast of Chengzhou City, Hunan Province, China, consist of Proterozoic metasedimentary rocks, Devonian carbonate rocks, Jurassic granitic rocks, Cretaceous granite porphyry and ultramafic dykes. The Shizhuyuan polymetallic deposits were associated with medium- to coarse-grained biotite granite of stage I. According to occurrences of ore body, ore minerals and assemblages, they might be classified into three stages such as skarn, greisen and hydrothernlal stages. The skarn is mainly calcic skarn, which develops around the Qianlishan granite, and consists of garnet, pyroxene, vesuvianite, wollastonite, amphibolite, fluorite, epidote, calcite, scheelite, wolframite, bismuthinite, molybdenite, cassiterite, native bismuth, unidetified Bi- Te-S system mineral, magnetite, and hematite. The greisen was related to residual fluid of medium- to coarse-grained biotite granite, and is classified into planar and vein types. It is composed of quartz, feldspar, muscovite, chlorite, tourmaline, topaz, apatite, beryl, scheelite, wolframite, bismuthinite, molybdenite, cassiterite, native bismuth, unknown uranium mineral, unknown REE mineral, pyrite, magnetite, and chalcopyrite with minor hematite. The hydrothermal stage was related to Cretaceous porphyry, and consist of quartz, pyrite and chalcopyrite. Scheelite shows a zonal texture, and higher MoO) content as 9.17% in central part. Wolframite is WO); 71.20 to 77.37 wt.%, FeO; 9.37 to 18.40 wt.%, MnO; 8.17 to 15.31 wt.% and CaO; 0.01 to 4.82 wt.%. FeO contents of cassiterite are 0.49 to 4.75 wt.%, and show higher contents (4.]7 to 4.75 wt.%) in skarn stage (Stage I). Te and Se contents of native bismuth range from 0.00 to 1.06 wt.% and from 0.00 to 0.57 wt.%, respectively. Unidentified Bi-Te-S system mineral is Bi; 78.62 to 80.75 wt.%, Te; 12.26 to 14.76 wt.%, Cu; 0.00 to 0.42 wt.%, S; 5.68 to 6.84 wt.%, Se; 0.44 to 0.78 wt.%.