• The Journal of Korean Society for School & Community Health Education
• /
• v.14 no.3
• /
• pp.77-87
• /
• 2013

Objective: The purpose of this study was to obtain the basic data for the establishment of the curriculum from the analysis of knowledge and attitudes about AIDS among dental hygiene students. Methods: Data was collected from the students of two colleges majoring in dental hygiene in Daegu, using questionnaire. They were the students of total 390. The analysis was made using t-test, (one-way ANOVA), and multiple linear regression analysis. These were conducted using SPSS 14.0 version. Results: The horizontal and vertical transmission in percent correct knowledge of HIV infection, most of the questions asked of respondents knew the correct answer, AIDS attitudes in the community education hours to receive AIDS education is important then the response was highest at 88.2 percent. AIDS knowledge is based on clinical practice, and AIDS attitudes in accordance with the educational experience of the average difference between groups investigated showed statistically significantly. HIV knowledge and attitudes, no oil, depending on the educational experience of the average difference between groups investigated showed statistically significantly. The grade, the higher knowledge of HIV was found to be lower in a statistically significant negative relationship showed (p<0.001), clinical experience, the more experience, knowledge of HIV was higher statistically significant positive showed a relationship (p<0.001), a higher attitude about HIV AIDS knowledge was higher showed a statistically significant positive relationship (p<0.001). Conclusion: Dental hygiene to prevent infection associated with AIDS in the curriculum and hands-on curriculum to enhance patient care through the AIDS patients in clinical management after graduating as a dental hygienist at the ethical responsibility is considered to be very strong.

• Economic and Environmental Geology
• /
• v.48 no.6
• /
• pp.525-536
• /
• 2015

Trapiche project corresponds to the advanced exploration stage which is thought to be a part of various porphyry copper deposits occurring in the margin of Andahuyalas-Yauri metallogenic belt. This deposit is genetically related to the monzonitic porphyry intrusion and Oligocene breccia pipe. Mineralization consists of primary sulfides such as pyrite, chalcopyrite, bornite, and molybdenite and secondary sulfides such as chalcocite, covellite and digenite. It occurs malachite, tenorite and cuprite as copper oxide. As a result of lixiviation or enrichment process, mineralization shows untypical zonation structure. Breccia and porphyry areas characterize the vertical zonation patterns. In the northern area, lixiviation zone, secondary enrichment zone, transitional zone and primary mineralized zone are distributed in northern area. In the western area of deposit, oxidation zone and mixed zones are narrowly occurred. Inferred resources of deposit is estimated to be 920 Mt @ 0.41% Cu with the cut-off grade of 0.15%.

• Journal of Welding and Joining
• /
• v.28 no.2
• /
• pp.32-38
• /
• 2010

In shipbuilding industry, welding position are usually flat and vertical position at the erection stage. Application of SAW and EGW for these positions makes it possible to achieve enhanced productivity and high quality. But owing to their large size and weight it is difficult to apply these techniques in short and narrow regions. To overcome this problem, our company developed light weight and compact size 4-axis welding carriage which perform 3D weaving. The purpose of this study is to explain the development and application of intelligent welding carriage using 3D weaving pattern that can fill a large amount of welds and thereby making it possible to achieve high quality of welding. This study shows 3D weaving pattern, development of weaving database, and skill of adaptive control response for the variable gap. Also, it shows the results of procedure qualification test for the AH-grade steel when applied to the intelligent welding carriage.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.5
• /
• pp.84-94
• /
• 1996

In order to prevent shell sticking by providing sufficient lubrication between the strand and the mold, the mold oscillation has been used. Now it is well known that the shape of the oscillation curve has a decisive effect on the surface quality of the cast product. Besides, oscillation parameters such as stroke and frequency are also very important. In order to guarantee that parameters which have been found to be optimal for a certain grade of steel do not change with time, periodical checks of the physical condition of the whole equipment are necessary. The portable mold oscillation analyzer with integrated computer, developed by POSCO, records the movement of the mold in every spatial direction. The system uses the gap sensors to measure the mold movement (displacement ) in the two horizontal directions according to the mold narrow and broad faces and the vertical strokes in the four corners of mold. The gap sensor is a non-contacting minute displacement measuring device using the principle of high frequency eddy current loss. The mold oscillation diagnosis system integrates the gap sensors, their converters and the industrial portable computer with plug-in data acquisition boards. The all programs, such as the fast Fourier transformation module (amplitude and phase spectrums) and harmonic analysis module, was coded by LabVIEW$^{TM}$ software as the graphical language. In an own 'expert module' which is included in the diagnosis program, one can obtain much information about the mold oscillation equipment.

• Journal of the Korean School Mathematics Society
• /
• v.18 no.1
• /
• pp.1-14
• /
• 2015

In this paper, in order to improve the teaching contents on even and odd number, composition and decomposition of numbers, and (1 digit)+(1 digit) with carrying, (10 and 1 digit)-(1 digit) with borrowing, the corresponding teaching contents in ${\ll}$Math 1-1${\gg}$, ${\ll}$Math 1-2${\gg}$ are critically reviewed. Implications obtained through this review can be summarized as follows. First, the current incomplete definition of even and odd numbers would need to be reconsidered, and the appropriateness of dealing with even and odd numbers in first grade would need to be reconsidered. Second, it is necessary to deal with composition and decomposition of numbers less than 20. That is, it need to be considered to compose (10 and 1 digit) with 10 and (1 digit) and to decompose (10 and 1 digit) into 10 and (1 digit) on the basis of the 10. And the sequence dealing with composition and decomposition of 10 before dealing with composition and decomposition of (10 and 1 digit) need to be considered. And it need to be considered that composing (10 and 1 digit) with (1 digit) and (1 digit) and decomposing (10 and 1 digit) into (1 digit) and (1 digit) are substantially useless. Third, it is necessary to eliminate the logical leap in the calculation process. That is, it need to be considered to use the composing (10 and 1 digit) with 10 and (1 digit) and decomposing (10 and 1 digit) into 10 and (1 digit) on the basis of the 10 to eliminate the leap which can be seen in the explanation of calculating (1 digit)+(1 digit) with carrying, (10 and 1 digit)-(1 digit) with borrowing. And it need to be considered to deal with the vertical format for calculation of (1 digit)+(1 digit) with carrying and (10 and 1 digit)-(1 digit) with borrowing in ${\ll}$Math 1-2${\gg}$, or it need to be considered not to deal with the vertical format for calculation of (1 digit)+(1 digit) with carrying and (10 and 1 digit)-(1 digit) with borrowing in ${\ll}$Math 1-2 workbook${\gg}$ for the consistency.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.4D
• /
• pp.291-303
• /
• 2012

In order to lead safe driving, it is better to provide dynamic and detailed information on how the driver using the relevant road should behave as concerning movements of individual car rather than providing monotone and static information of reducing of speed to unspecified drivers. Assuming road and communication of highway where real-time collection and transfer of information on vehicles and road traffic status is possible, the purpose of this study was to provide real-time safe distance by considering road traffic condition such as road condition and driving condition, travel speed and distance between preceding/following vehicles. We intended to provide basic information about dangerous situation by defining different values of condition based column ($C_{condition}$) in accordance with the road surface condition, based on which Real-time Safety Distance Index(RSDI) is to be calculated comprehensively reflecting speed of preceding and following vehicles, distance between vehicles, vertical alignment and road surface condition on the scope of expression column ($C_n$). We intended to enable the driver to secure safety by providing the calculated Real-time Safety Distance Index (RSDI) so that the driver can intuitively sense and sufficiently cope with a dangerous situation where collision of vehicles may occur. The calculated RSDI value is comprised of 30 unit columns and will be provided to the driver being divided into risk evaluation grades of 3 predetermined steps, 'warning', 'dangerous' and 'normal'.

• Korean Journal of Plant Resources
• /
• v.30 no.2
• /
• pp.167-175
• /
• 2017

We conducted a total of 28 surveys from March to October 2016 in Gayasan National Park, to identify threatened plants for climate change, as well as for the effective management of biological organisms and resources against climate changes in Korea. Regarding threatened plants for climate change, we identified a total of 39 taxa, with 11 northern, 2 southern, and 26 taxa of concern. Among these taxa, 33 were identified as wild species. The species threatened by climate change located in the subalpine regions of Gayasan National Park were Abies holophylla Maxim., Abies koreana Wilson, Pinus koraiensis Siebold & Zucc., Betula ermanii Cham., Berberis amurensis Rupr., Rhododendron tschonoskii Maxim., Vaccinium hirtum var. koreanum (Nakai) Kitam., Primula modesta var. hannasanensis T.Yamaz., Trientalis europaea var. arctica (Fisch.) Ledeb., Thymus quinquecostatus Celak., Parasenecio firmus (Kom.) Y.L.Chen, and Lilium cernuum Kom. These species are expected to be particularly vulnerable to the effects of global warming, since they were confirmed to have a very narrow vertical distribution range. Moreover, although the following species are not included in the list of plants threatened by climate change, it is assumed that the endemic species that grow at the summit, and Grade V floristics special plants, such as Pedicularis hallaisanensis Hurus., Allium thunbergii var. deltoides (S.O.Yu, S.Lee & W.Lee) H.J.Choi & B.U.Oh, Heloniopsis tubiflora Fuse, N.S.Lee & M.N. Tamura, Aletris glabra Bureau & Franch, and Gymnadenia cucullata (L.) Rich., will also be extremely vulnerable to climate change. Therefore, we believe that measures for the conservation of these species are urgently needed, and also that the definition of species threatened by climate change should be broadened to include more objective and valid taxa through the long-term monitoring of species distributed around the summit area.

• Journal of Educational Research in Mathematics
• /
• v.25 no.4
• /
• pp.599-615
• /
• 2015

Teachers' philosophies have not been emphasized enough in the current teacher education curriculum even though teacher's philosophy palys a critical role in schools and classrooms. The examination on pre-service teachers' teaching philosophies is necessary to improve teacher education curriculum so that teaching philosophies are often discussed in the courses of 'pedagogical content knowledge' as well as 'general education.' Therefore, the current study investigated 44 pre-service teachers' teaching philosophies, their sub domains, and relationships among the sub domains. The previous studies regarding mathematics teacher's teaching philosophy were more about 'teacher's belief' and employed deductive inference approach using surveys or questionnaires. These studies commonly pointed out that there were three major domains of 'belief on mathematics itself,' 'belief on teaching mathematics,' and 'belief on learning mathematics.' As these three domains of teacher's philosophy has been strengthened, there were very few studies examining the other potential domains of teacher's teaching philosophy. According to the findings of the present study, which employed inductive inference approach and pre-service teachers' free essay writing assignment, 'belief on teacher's role in mathematics classroom,' 'belief on the purpose of mathematics education,' and 'motivation to be a mathematics teacher' were additionally illuminated as sub domains of teacher's teaching philosophy. Moreover, the interrelationship among the sub-areas of teacher's teaching philosophy was disclosed. Specifically, 'belief on the purpose of mathematics education' and 'motivation to be a mathematics teacher' influenced the other sub domains. This implies that the relationships among the sub domains of teacher's teaching philosophy were more likely to be causal and vertical relationships rather than independent and parallel relationships. Finally, the findings from the current study provide implications indicating how pre-service teachers' teaching philosophies might be established in mathematics education courses for future research and education.

• Journal of Conservation Science
• /
• v.26 no.3
• /
• pp.277-294
• /
• 2010

The Seosanmaaesamjonbulsang (National Treasure No. 84) consists of light gray and coarse to mediumgrained biotite granite with partly developed pegmatite and quartz vein. The host rock is divided into dozens of rock blocks with various shape along irregular discontinuity plane. The evaluation results of discontinuity systems reveal that the host rock were exposed to instable sloping environments. Results of deterioration diagnosis show that the degree of damage has been made worse by physical weathering and surface discoloration laying stress on part that vertical and horizontal joints are massed. Generally, deterioration rate of the triad Buddha surface cover with 42.7%, however, the rate of physical weathering and surface discoloration are subdivided to 9.6% and 33.1%, respectively. Ultrasonic measurements indicate that the triad Buddha was reached highly weathered grade in general. And the rock material was weaken to show low velocity zone of 1,000m/s along irregular joint systems. Indoor and outdoor mean relative humidity of the shelter was recorded more than 70% during every season, and high frequency appears in high relative humidity range over 95%. Such environments seem to have produced dew condensation on the rock surface with rainfall and supply water, promoted physical, chemical and biological weathering along crack and joint, resulting in high permeation of water and percentage of water content. Therefore, it is judged that for scientific conservation of the triad Buddha it needs environment control through persistent preservation environment monitoring including water problem.

• Journal of the Korean Applied Science and Technology
• /
• v.24 no.2
• /
• pp.124-139
• /
• 2007

In order to obtain the maximum flame retardancy with the minimal deterioration of physical properties of PU flame-retardant coatings, chlorine and phosphorous functional groups were introduced into the pre-polymer of modified polyesters. In the first step, the tetramethylene bis(orthophosphate) (TBOP) and neohexanediol dichloroacetate (DCA-adduct) intermediates were synthesized. In the second step, 1,4-butanediol and adipic acid monomers were polymerized with the two kind of intermediates to obtain copolymer. The modified polyesters containing chlorine and phosphorous (ATBA-10C, -20C, and -30C) were synthesized by adjusting the contents of chlorine compound (dichloroacetic acid, 10, 20, 30 wt%) with fixed the content of phosphorous compound (2 wt%). The PU flame-retardant coatings (TTBAH -10C, -20C, and -30C) were prepared using the synthesized ATBAs and HDI-trimer as curing agent at room temperature. The physical properties of PU flame-retardant coatings with chlorine and phosphorous were inferior to those with phosphorous only and the properties were getting worse with increasing chlorine content. Flame retardancy was tested with three methods. With the vertical method, Complete combustion time of ATBAHs were $259^{\sim}347$ seconds, which means that the prepared coatings are good flame-retardant. With the $45^{\circ}$ Meckel burner method, char lengths of the three prepared coatings were less than 2.9 cm, which indicates that the prepared coatings are 1st grade flame retardancy. With the limiting oxygen index (LOI) method, the LOI values of the three prepared coatings were in the range of $30^{\sim}35%$, which proves good flame retardancy of the prepared coatings. From the results of flame retardancy tests of the specimens that contain the same amounts of flame retarding compounds, it was found that the coatings containing both phosphorous and chlorine show higher flame retardancy than the coatings containing phosphorous alone. This indicates that some synergy effect of flame retardancy exists between phosphorous and chlorine.