• 센서학회지
• /
• 제26권6호
• /
• pp.438-444
• /
• 2017

In this paper, we focus on optimization of the in-situ phosphorous (P) doping of low-pressure chemical vapor deposited (LPCVD) poly Si resistors for obtaining near-zero temperature coefficient of resistance (TCR) at temperature range from 25 to $600^{\circ}C$. The deposited poly Si films were annealed by rapid thermal anneal (RTA) process at the temperature range from 900 to $1000^{\circ}C$ for 90s in nitrogen ambient to relieve intrinsic stress and decrease the TCR in the poly Si layer and get the Ohmic contact. After the RTA process, a roughness of the thin film was slightly changed but the grain size and crystallinity of the thin film with the increase in anneal temperature. The film annealed at $1,000^{\circ}C$ showed the behavior of Schottky contact and had dislocations in the films. Ohmic contact and TCR of $334.4{\pm}8.2$ (ppm/K) within 4 inch wafer were obtained in the measuring temperature range of 25 to $600^{\circ}C$ for the optimized 200 nm thick-poly Si film with width/length of $20{\mu}m/1,800{\mu}m$. This shows the potential of in-situ P doped LPCVD poly Si as a resistor for pressure sensor in harsh environment applications.

• Journal of Biosystems Engineering
• /
• 제42권1호
• /
• pp.23-43
• /
• 2017

Purpose: As application-specific wireless sensor networks are gaining popularity, this paper discusses the development and field performance of the GHAN, a greenhouse area network system to monitor, control, and access greenhouse microenvironments. GHAN, which is an upgraded system, has many new functions. It is an intelligent wireless sensor and actuator network (WSAN) system for next-generation greenhouses, which enhances the state of the art of greenhouse automation systems and helps growers by providing them valuable information not available otherwise. Apart from providing online spatial and temporal monitoring of the greenhouse microclimate, GHAN has a modified vapor pressure deficit (VPD) fuzzy controller with an adaptive-selective mechanism that provides better control of the greenhouse crop VPD with energy optimization. Using the latest soil-matrix potential sensors, the GHAN system also ascertains when, where, and how much to irrigate and spatially manages the irrigation schedule within the greenhouse grids. Further, given the need to understand the microclimate control dynamics of a greenhouse during the crop season or a specific time, a statistical assessment tool to estimate the degree of optimality and spatial variability is proposed and implemented. Methods: Apart from the development work, the system was field-tested in a commercial greenhouse situated in the region of Punjab, India, under different outside weather conditions for a long period of time. Conclusions: Day results of the greenhouse microclimate control dynamics were recorded and analyzed, and they proved the successful operation of the system in keeping the greenhouse climate optimal and uniform most of the time, with high control performance.

• 한국재료학회지
• /
• 제32권10호
• /
• pp.435-441
• /
• 2022

We report the synthesis and gas sensing properties of bare and ZnO decorated TeO₂ nanowires (NWs). A catalyst assisted-vapor-liquid-solid (VLS) growth method was used to synthesize TeO₂ NWs and ZnO decoration was performed using an Au-catalyst assisted-VLS growth method followed by a subsequent heat treatment. Structural and morphological analyses using X-ray diffraction (XRD) and scanning/transmission electron microscopies, respectively, demonstrated the formation of bare and ZnO decorated TeO₂ NWs with desired phase and morphology. NO₂ gas sensing studies were performed at different temperatures ranging from 50 to 400 ℃ towards 50 ppm NO₂ gas. The results obtained showed that both sensors had their best optimal sensing temperature at 350 ℃, while ZnO decorated TeO₂ NWs sensor showed much better sensitivity towards NO₂ relative to a bare TeO₂ NWs gas sensor. The reason for the enhanced sensing performance of the ZnO decorated TeO₂ NWs sensor was attributed to the formation of ZnO (n)/ TeO₂ (p) heterojunctions and the high intrinsic gas sensing properties of ZnO.

• 센서학회지
• /
• 제8권2호
• /
• pp.115-123
• /
• 1999

PSG(800nm)/$Si_3N_4$ (150nm)로 구성된 유전체 membrane 윗면에 heater와 감지전극을 등일면상에 동시에 형성하였다. 제작된 소자의 전체 면적은 $3.78{\times}3.78mm^2$이고, diaphragm의 면적은 $1.5{\times}1.5mm^2$이며, 감지막치 면적은 $0.24{\times}0.24mm^2$였다. 그리고 diaphragm내의 열분포 분석을 유한요소법을 이용하여 수행하였으며, 실제로 제작된 소자의 열분포와 비교하였다. 소비전력은 동작온도 $350^{\circ}C$에서 약 85mW였다. Sn 금속막을 상온과 $232^{\circ}C$의 두 가지 기판온도에서 열증착하였고, 이를 $650^{\circ}C$의 산소분위기에서 3시간 열산화함으로써 $SnO_2$ 감지막을 형성하였다. 그리고 이를 SEM과 XRD로 특성을 분석하였다. 제작된 소자에 대해서 온도 및 습도에 대한 감지막의 영향 및 부탄가스에 대한 반응특성도 조사하였다.

• 센서학회지
• /
• 제27권4호
• /
• pp.221-226
• /
• 2018

Misfueling accidents significantly damage the engines of both gasoline and diesel vehicles, and should be avoided by rapid and accurate fuel discrimination. Gasoline fuel contains bioethanol. Thus, the detection of ethanol vapor produced by gasoline can be used to distinguish between gasoline and diesel. In the present study, Pt-doped $SnO_2$ hollow nanospheres, Mg-doped $In_2O_3$ hollow microspheres, and Pt-doped ZnO nanostructures have been used as gas sensors to discriminate between gasoline and diesel fuels. All three sensors are able to detect and discriminate between gases evaporating from gasoline and diesel. Among the sensors, the Mg-doped $In_2O_3$ hollow microspheres show a significant gas response (resistance ratio = 4.97) quickly (~3 s) after exposure to gasoline-evaporated gas at $225^{\circ}C$, but did not show any substantial response to diesel-evaporated gas. This demonstrates that gasoline and diesel fuels can be discriminated using small and cost-effective oxide semiconductor gas sensors.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.561-561
• /
• 2012

Graphene, two dimensional single layer of carbon atoms, has tremendous attention due to its superior property such as fast electron mobility, high thermal conductivity and optical transparency, and also found many applications such as field-effect transistors (FET), energy storage and conversion, optoelectronic device, electromechanical resonators and chemical sensors. Several techniques have been developed to form the graphene. Especially chemical vapor deposition (CVD) is a promising process for the large area graphene. For the electrically isolated devices, the graphene should be transfer to insulated substrate from Cu or Ni. However, transferred graphene has serious drawback due to remaining polymeric residue during transfer process which induces the poor device characteristics by impurity scattering and it interrupts the surface functionalization for the sensor application. In this study, we demonstrate the characteristics of solution-gated FET depending on the removal of polymeric residues. The solution-gated FET is operated by the modulation of the channel conductance by applying a gate potential from a reference electrode via the electrolyte, and it can be used as a chemical sensor. The removal process was achieved by several solvents during the transfer of CVD graphene from a copper foil to a substrate and additional annealing process with H2/Ar environments was carried out. We compare the properties of graphene by Raman spectroscopy, atomic force microscopy(AFM), and X-ray Photoelectron Spectroscopy (XPS) measurements. Effects of residual polymeric materials on the device performance of graphene FET will be discussed in detail.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.78-79
• /
• 2008

In this paper, poly 3C-SiC thin films were grown on $SiO_2$/Si by atmospheric pressure chemical vapor deposition (APCVD) using HMDS, $H_2$, and Ar gas at $1100^{\circ}C$ for 30 min, respectively. And then, palladium films were deposited on poly 3C-SiC by RF magnetron sputter. Thickness, uniformity, and quality of these samples were performed by SEM. Crystallinity and preferred orientationsof palladium were analyzed by XRD. And Pd/poly 3C-SiC schottky diodes were fabricated and characterized by current-voltage measurements. Its electric current density Js and barrier height voltage were measured as $2\times10^{-3}$ A/$cm^2$, 0.58 eV, respectively. And these devices operated about $350^{\circ}C$. From results, Pd/poly 3C-SiC devices are promising for high temperature hydrogen sensor and applications.

• 한국전기전자재료학회논문지
• /
• 제17권6호
• /
• pp.592-597
• /
• 2004

Porous silicon(PS) has received much attention as a sensitive material of chemical sensors because of its large internal surface area. In this work, we fabricated gas-sensing devices based on the porous silicon layer which could be applicable to the measurement of blood alcohol content(BAC), and estimated their electrical properties. The structure of the sensor is similar to an MIS (metal-insulator-semiconductor) diode and consists of thin Au/oxidized PS/PS/p-Si/Al, where the p-Si substrate is etched anisotropically to reduce the thickness. We measured C-V curves from two types of the samples with the PS layer treated by the different anodization current density of 60 or 100 mA/cm$^2$, in order to compare the sensitivity. As a result, the magnitude and variation of capacitances from the devices with the PS formed under the current density of 100 mA/cm$^2$ were found to be more detectable due to the larger internal surface.

• 센서학회지
• /
• 제14권2호
• /
• pp.63-68
• /
• 2005

The nano-grained Pd or Pt-doped $SnO_{2}$ thin films were deposited on the alumina substrate at ambient temperature or $300^{\circ}C$ by using an R.F. magnetron sputtering system and then annealed at $650^{\cir}C$ for 1 hour or 4 hours in air. The crystallinity and microstructure of the annealed films were analyzed. A grain size of the thin films was 30 nm to 50 nm. As a result of gas sensitivity measurements to an alcohol vapor of $36^{\circ}C$, the 2 wt.% Pt-doped $SnO_{2}$ thin-film sensor deposited at $300^{\circ}C$ and annealed at $650^{\circ}C$ for 4 hours showed the highest sensitivity.

• 한국산학기술학회논문지
• /
• 제19권9호
• /
• pp.536-542
• /
• 2018

이산화주석은 Rutile 구조를 갖는 Oxygen-Deficient n-type 반도체 물질로서, $H_2$, CO, $CO_2$ 등의 가스 분자가 표면에 흡착되면 전기저항이 변하는 특성을 가지고 있고, 이러한 성질을 활용하면 다양한 가스의 감지가 가능하기 때문에 가스센서로 연구가 활발히 이루어지고 있다. 나노구조물의 경우 Bulk 상태보다 체적 대비 표면적비가 높기 때문에 기체의 흡착이 유리하고, 가스 센서의 성능이 향상될 수 있다. 본 연구에서는 Thermal CVD 공정을 이용하여 SnO Nanoplatelet을 Si 기판위에 Dense하게 성장시켰다. 기상 수송 방법(Vapor Transport Method)으로 성장된 SnO 나노구조물을 Thermal CVD System을 이용하여 산소분위기에서 $830^{\circ}C$ 및 $1030^{\circ}C$에서 열처리(Post-Annealing)하여 $SnO_2$ 상(Phase)을 갖도록 하였다. 열처리 과정동안 쳄버의 압력을 4.2 Torr로 일정하게 유지시켰다. 열처리 된 SnO 나노구조물의 결정학적 특성을 Raman Spectroscopy 및 XRD 분석을 통하여 확인하였고, 형태학적 변화를 주사전사현미경(Scanning Electron Microscopy)을 통하여 확인하였다. 분석결과 SnO 나노구조물은 열처리 과정을 통하여 $SnO_2$ 나노구조물로 상변환 되었다.