• 대한수학회논문집
• /
• 제10권4호
• /
• pp.839-847
• /
• 1995

For the given torsion theory $\tau$, we study some equivalent conditions when the localized ring $R_\tau$ be semisimple artinian (Theorem 4). Using this, if $R_\tau$ is semisimple artinian ring, we study when does the given ring R become left V-ring?

• 대한수학회보
• /
• 제53권6호
• /
• pp.1613-1615
• /
• 2016

It is proved that $k[X_1,{\ldots},X_v ]$ localized at the ideal ($X_1,{\ldots},X_v$ ), where k is a field and $X_1,{\ldots},X_v$ indeterminates, is not weakly quasi-complete for $v{\geq}2$, thus proving a conjecture of D. D. Anderson and solving a problem from "Open Problems in Commutative Ring Theory" by Cahen, Fontana, Frisch, and Glaz.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 춘계학술대회 논문집
• /
• pp.357-360
• /
• 2007

The profile ring rolling process of Ti-6Al-4V alloy was designed by finite element(FE) simulation and experimental analysis. The design includes geometry design and optimization of process variables. The geometry design such as initial billet and blank sizes, and final rolled ring shape was carried out with the calculation method based on the uniform deformation concept between the wall thickness and ring height. FEM simulation was used to calculate the state variables such as strain, strain rate and temperature and to predict the formation of forming defects during ring rolling process. Finally, the mechanical properties of profiled Ti-6Al-4V alloy ring product were analyzed with the evolution of microstructures during the ring rolling process.

• 한국수학교육학회지시리즈B:순수및응용수학
• /
• 제11권2호
• /
• pp.127-132
• /
• 2004

$H_v$-rings first were introduced by Vougiouklis in 1990. The largest class of algebraic systems satisfying ring-like axioms is the $H_v$-ring. Let R be an $H_v$-ring and ${\gamma}_R$ the smallest equivalence relation on R such that the quotient $R/{\gamma}_R$, the set of all equivalence classes, is a ring. In this case $R/{\gamma}_R$ is called the fundamental ring. In this short communication, we study the fundamental rings with respect to the product of two fuzzy subsets.

• 한국전기전자재료학회논문지
• /
• 제30권3호
• /
• pp.148-151
• /
• 2017

This research concerns field rings for 3.3kV planar gate power insulated-gate bipolar transistors (IGBTs). We design an optimal field ring for a 3.3kV power IGBT and analyze its electrical characteristics according to field ring parameters. Based on this background, we obtained 3.3kV high breakdown voltage and a 2.9V on state voltage drop. To obtain high breakdown voltage, we confirmed that the field ring count was 23, and we obtained optimal parameters. The gap distance between field rings $13{\mu}m$ and the field ring width was $5{\mu}m$. This design technology will be adapted to field stop IGBTs and super junction IGBTs. The thyristor device for a power conversion switch will be replaced with a super high voltage power IGBT.

• Design & Manufacturing
• /
• 제11권3호
• /
• pp.46-50
• /
• 2017

Press processing is one of the best machining methods capable of mass production, satisfying dimensional, shape and quality among the methods of processing a metal plate. Among them, Fine blanking is a method of obtaining a precise cross-section such as machining of the shear surface shape. In this research, Using SCP-1 and SHP-1 materials. The deformation behaviors of the material flow affecting the die height of the shear section in accordance with the position of the V-ring in the Fine blanking were compared and analyzed. Result of interpretation, It was confirmed that the force acts on the position where the material flow direction accurately forms the die roll that the material of SCP-1 is at a position of 1.5 mm and the material of SHP-1 is at 2.0 mm. As a result, it was confirmed that the state of fo1111ing the shear surface by the V-ring was excellent. Using analysis results, In the experiment, the height of the die roll was considered by applying The position of the V-ring was 1.5 mm in SCP-1 and 2.0 mm in SHP-1. As a result of comparing the height of the die rolls, the height values of the die rolls were different from each other, It has been considered that the tendency of the die rolls to coincide with each other. It is considered that the difference of the die roll height is caused by the pressure input of the V-ring. In this study, the deformation behavior of the material(In addition to the position of the V-ring, the flow direction of the material depends on the shape of the V-ring and the Indentation amount) is considered to be an important factor in determining die roll height.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2006년도 춘계학술대회 논문집
• /
• pp.373-376
• /
• 2006

The ring rolling design for a large-scale Ti-6Al-4V alloy ring was performed with a calculation method and FEM simulation. The ring rolling design includes geometry design and optimization of process variables. The calculation method was to determine geometry design such as initial billet and blank size, and final rolled ring shape. A commercial FEM code, SHAPE was used to simulate the effect of process variables in ring rolling on the distribution of the internal state variables such as strain, strain rate and temperature. In order to predict the forming defects during ring rolling, the process-map approach based on Ziegler's instability criterion was used with FEM simulation. Finally, an optimum process design to obtain sound Ti-6Al-4V rings without forming defects was suggested through combined approach of Ziegler's instability map and FEM simulation results.

• 충청수학회지
• /
• 제15권2호
• /
• pp.35-39
• /
• 2003

In this paper we study a ring over which every left module of finite length has an injective hull of finite length. We consider a ring that is a finite intermediate normalizing extension ring of such a ring. We also consider the subrings of such a ring.

• 대한수학회논문집
• /
• 제37권1호
• /
• pp.17-29
• /
• 2022

A commutative ring with unity R is called an EM-ring if for any finitely generated ideal I there exist a in R and a finitely generated ideal J with Ann(J) = 0 and I = aJ. In this article it is proved that C(X) is an EM-ring if and only if for each U ∈ Coz (X), and each g ∈ C^* (U) there is V ∈ Coz (X) such that U ⊆ V, ${\bar{V}}=X$, and g is continuously extendable on V. Such a space is called an EM-space. It is shown that EM-spaces include a large class of spaces as F-spaces and cozero complemented spaces. It is proved among other results that X is an EM-space if and only if the Stone-Čech compactification of X is.

• 한국산학기술학회논문지
• /
• 제14권8호
• /
• pp.3650-3655
• /
• 2013

파인블랭킹 금형을 제작하는 주목적은 전단면의 크기를 최대가 되도록 하기 위함이다. 본 연구에서는 전단면의 크기에 가장 크게 영향을 미치는 클리어런스는 재료 두께의 1%로 고정시키고 전단라인에서 Vee-Ring 중심까지의 거리 변화, V-Ring 각도의 변화, 전단 속도를 변화시키면서 전단 면적의 크기 변화를 연구 고찰하였다. 각 실험으로부터 시편을 채취하여 전단면의 크기를 분석한 결과 V-링의 거리는 2mm, 각도는 외측$45^{\circ}$/내측$30^{\circ}$일 때, 전단 속도는 6.4m/min일 때 전단면의 크기가 가장 크게 됨을 알 수 있었다.