• Textile Coloration and Finishing
• /
• v.26 no.1
• /
• pp.53-62
• /
• 2014

This study examined the dyeability, color fastness and functionality of cotton fabrics dyed with residual parts of cultivated Pteridium aquilinum. UV-Vis absorption spectrum, TLC and FT-IR spectra analysis showed that colorants of Pteridium aquilinum are a mixture of pyrogallol tannin and catechol tannin. Optimum dyeing conditions was confirmed colorant concentration of 500% at $100^{\circ}C$ for 60 minutes. Color fastness followed to washing, rubbing, perspiration and light as 4-5, 5, 4-5(acidic), 3-4(alkaline) and 2, respectively. Deodorization rates of ammonia($NH_3$) and acetic acid ($CH_3COOH$) were analyzed 88.8% and 78.0%. UV protection rate was 94.2% of UV-A and 96.8% of UV-B. UV protection factor(UPF) was 27. Therefore residual parts of cultivated Pteridium aquilinum could be used for a new functional colorant.

• Journal of Environmental Science International
• /
• v.16 no.3
• /
• pp.255-260
• /
• 2007

The photocatalytic decolorization of Rhodamine B (RhB) was studied using packed-bed reactor and immobilized $TiO_2/UV$ System. The 20 W UV-A, UV-B and UV-C lamps were employed as the light source. The effect of shape and surface polishing extent of reflector, distance between the reactor and reflector, reactor material were investigated. The results showed that the order of the initial reaction constant with reflector shape was round > polygon > W > rhombus. The optimum distance between the reactor and reflector was 2 cm. The initial reaction constant of quartz reactor was 1.46 times higher than that of tile PVDF reactor.

• Nuclear Engineering and Technology
• /
• v.54 no.2
• /
• pp.627-636
• /
• 2022

In nuclear power plants and other nuclear facilities the removal of cobalt from radioactive liquid waste is needed to reduce the radioactivity concentration in effluents. In liquid wastes containing strong organic complexing agents such as EDTA cobalt removal can be problematic due to the high stability of the Co-EDTA complex. In this study, the removal of cobalt from NaNO₃ solutions using antimony oxide (Sb₂O₃) synthesized from potassium hexahydroxoantimonate was investigated in the absence and presence of EDTA. The uptake studies on the ion exchange material were conducted both in the dark (absence of UV-light) and under UV-C irradiation. Ca²⁺ or Ni²⁺ were included in the experiments as competing cations to test the selectivity of the ion exchanger. Results show that UV-C irradiation noticeably enhances the cobalt sorption efficiency on the antimony oxide. It was shown that nickel decreased the sorption of cobalt to a higher extent than calcium. Finally, the sorption data collected for Co²⁺ on antimony oxide was modeled using six different isotherm models. The Sips model was found to be the most suitable model to describe the sorption process. The Dubinin-Radushkevich model was further used to calculate the adsorption energy, which was found to be 6.2 kJ mol^-1.

• Journal of environmental and Sanitary engineering
• /
• v.14 no.4
• /
• pp.143-149
• /
• 1999

In the tungsten industry as light source material, tungsten filament which used as light source material could form after molybdenumwire which used as the center supporter for coil shape tungsten wire was removed. This process uses hydrogen peroxide, Ozone and UV(Ultraviolet)Lamp, for the quantity of hydrogen peroxide decrease. The results were as follows : 1. An incandescent electric Lamp type : FL(FL-20) type : A standard of commodity (P.W.: $19{\pm}1.0mg$, $C.R:4.5{\pm}0.3{\Omega}$) 1) Only hydrogen peroxide treated ; Reaction Time : 65Min., P.W.: 18.60mg, $C.R.:4.60{\Omega}$ 2) Ozone/Ultraviolet/70% of hydrogen peroxide; Reaction Time : 64Min., P.W.: 18.61mg, C.R.: $4.61{\Omega}$ 2. A Fluorescent Lamp Type : GLS(GLS-40) Type : A standard of commodity(P.W.: $11.8{\pm}0.2mg$$65{\pm}1.5{\Omega}$) 1) Only hydrogen peroxide treated ; Reaction Time: 72Min, P.W.:11.88mg, C.R.: $65.62\Omega$ 2) Ozone/Ultraviolet/70% of hydrogen peroxide;Reaction Time:71Min., P.W.:11.88mg, C.R.: $65.63\Omega$

• BMB Reports
• /
• v.29 no.5
• /
• pp.423-428
• /
• 1996

A superoxide anion radical scavenger isolated from Capsella bursa-pastoris was characterized by infrared (IR) spectroscopy, sugar analysis, ultraviolet (UV) spectroscopy, $^{1}H$ and $^{13}C$ nuclear magnetic resonance (NMR) spectroscopies, and fast atom bombardment (FAB) mass analysis. The compound was assumed to be a flavonoid-O-glycoside from IR spectrum and UV absorption maxima. When the sugar composition of the compound was examined by thin layer chromatography (TLC) and gas chromatography (GC) of the acid hydrolysate, only glucose was detected. According to the results of UV spectrotroscopy by using shift reagents, the compound was supposed to be luteolin (5,7,3',4'-tetrahydroxy flavone) or chrysoeriol (5,7,4'-trihydroxy-3'-methoxy flavone) with glucose. Based on $^{1}H$- and $^{13}C-NMR$ spectroscopies, the compound was deduced as 7,4'-dihydroxy-5,3'-dimethoxy-${\alpha}$-6-c-glucosyl-${\beta}$-2"-o-glucosyl flavone. In FAB mass analysis the compound was finally characterized as 7,4'-dihydroxy-5,3'-dimethoxy-${\alpha}$-6-c-glucosyl-${\beta}$-2"-o-glucosyl flavone ($C_{29}H_{34}O_{16}$, M.W.=638).

• Korean Journal of Materials Research
• /
• v.27 no.9
• /
• pp.459-465
• /
• 2017

Nano-sized Zinc selenide (ZnSe) powder was successfully synthesized using Zn and Se precursors in a hydrothermal process. Temperature for the synthesis was varied from $95^{\circ}C$ to $180^{\circ}C$ to evaluate its influence on the microstructural properties of the synthetic particles. ZnSe powder thus fabricated was characterized using various analytical tools such as SEM, XRD, TEM and UV-Vis methods. Two types of ZnSe particles, that is, the precipitated particle and the colloidal particles, were identified in the analysis. The precipitated particles were around 100 nm in average size, whereas the average size of the colloidal particles was around 20 nm. The precipitated particles made at $150^{\circ}C$ and $180^{\circ}C$ were found to be a single phase of ZnSe; however, an inhomogeneous phase was obtained at the lower synthesis temperature of $95^{\circ}C$, suggesting that the temperature for the synthesis should be over $100^{\circ}C$. The precipitated particles were inactive in the UV-Vis absorption investigation, whereas the colloidal particles showed that absorptions occurred at 380 nm in the UV-Vis spectrum.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.370-371
• /
• 2007

To investigate the ZnO thin films which are interested in the next generation of short wavelength LEDs and Lasers and UV photodetector with p-type inversion layer, the ZnO thin films were deposited by. RF sputtering system. Substrate temperature and work pressure is $100^{\circ}C$ and 15 mTorr, respectively, and the purity of ZnO target is 5N. The ZnO thin films were deposited at $100^{\circ}C$, $200^{\circ}C$, $300^{\circ}C$, and $400^{\circ}C$. For sample deposited at $300^{\circ}C$, we observed full width at half maximum (FWHM) of 0.240 and good surface morphology.

• Fibers and Polymers
• /
• v.2 no.3
• /
• pp.141-147
• /
• 2001

The effect of compositions of isophorone diisocyanate (IPDl)/4.4'-diphenylmethane diisocyalate (MDI) and polypropylene oxide diol (PPG, $M_w$: 3000)/1,4-butane diol (BD) on the properties of UV-cured polyurethane acrylate films based on 2-hydroxyethyl acrylate (HEA) was examined. UV-curable polyurethane acrylates were formulated from the prepolymer. trimethylol propane triacrylate (TMPTA) as a reactive diluent, and 1-hydroxycyclohexyl ketone (Irgacure 184) as a photoinitiator. Dynamic mechanical thermal properties and elastic properties of UV-cured polyurethane acrylates was fecund to depend on the chemical composition of IPDl/MDl and PPG/BD. As the BD content increased, the tensile storage modulus of all series samples increased significantly. The storage modulus increased in the order of samples A (IPDI based samples)> samples B (IPDI/MDl (7/3 molar ratio) based samples) > samples C (IPDI/MDl (5/5 molar ratio) based samples at the same composition. Two distinct louts modulus peaks for all samples are observed owing to the softs segment glass transition temperature ($T_gh$) and hard segment glass transition temperature ($T_gh$). The difference between $T_gh$, and $T_gh$, (Δ$T_g$) increases in the order of A > B > C at the same composition. In cycle test, the initial onset strain (%) was found to decrease with increasing BD content in PPG/BD and with increasing MDI content in IPDI/MDl.

• 한국생물공학회:학술대회논문집
• /
• 2003.10a
• /
• pp.794-798
• /
• 2003

The reactive oxygen species (or free radicals) generated by ultraviolet radiation cause damage on cellular components and pigment of skin. The aim of this study was to investigate the skin-whitenig effect of Okyong-san. Inhibitory effects of okyong-san extracts on melanin synthesis were studied. Namely, UV-absorbing ability, free radical scavenging activity and tyrosinase inhibitory activity of okyong-san extracts were investigated. As a result, the extracts of okyong-san were found to inhibit the activity of tyrosinase and they showed an absorbance in the UV-B region and UV-C region. We also observed that extracts of okyong-san had free radical scavenging activity.

• 한국생물공학회:학술대회논문집
• /
• 2005.04a
• /
• pp.566-569
• /
• 2005

The extracellular polysaccharide...(EPS) has been used in a wide variety of industrial applications because of gel formation, emulsion stability, control of the surface tension, water absorption and film formation etc. In this study, inhibitory activity on tyrosinase and inhibitory activity on angiotensin converting enzyme...(ACE) are determined. UV adsorption wavelength, beads formation of EPS were investigated. In the result, in 1%(w/v) EPS concentration, EPS had inhibitory activity of 71.8% on tyrosinase and inhibitory activity of 61.5% on angiotensin converting enzyme in 1.5% EPS concentration. Adsorption wavelength of EPS was UV-B,C . Beads based on EPS were prepared by w/o emulsion method and the shape of EPS beads observed by SEM was spherical and uniform.