• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.5
• /
• pp.664-674
• /
• 2016

The electrical properties of Ti/p-type InP Schottky diodes with and without polyaniline (PANI) interlayer was investigated using current-voltage (I-V) and capacitance-voltage (C-V) measurements. The barrier height of Ti/p-type InP Schottky diode with PANI interlayer was higher than that of the conventional Ti/p-type InP Schottky diode, implying that the organic interlayer influenced the space-charge region of the Ti/p-type InP Schottky junction. At higher voltages, the current transport was dominated by the trap free space-charge-limited current and trap-filled space-charge-limited current in Ti/p-type InP Schottky diode without and with PANI interlayer, respectively. The domination of trap filled space-charge-limited current in Ti/p-type InP Schottky diode with PANI interlayer could be associated with the traps originated from structural defects prevailing in organic PANI interlayer.

• Korean Journal of Materials Research
• /
• v.9 no.1
• /
• pp.104-107
• /
• 1999

We investigated the effects of cooling condition on deep levels and iron precipitate formation in iron-contaminated p-type silicon by DLTS(Deep Level Transient Spectroscopy) and preferential etching technique. Dependency of cooling condition on Bulk Micro-Defect (BMD) and four different iron-related deep traps were observed. For normal cooling condition, T1, T2, T3, T4 traps that related to Fe\ulcorner or Fe-O complex were obtained. However, the trap with activation energy, 0.4 eV was observed for slow cooling condition. The trap caused by the $\textrm{Fe}^{+}\textrm{}^{-}$ pair (H4:0.56eV) were detected only at the case of $\textrm{LN}_{2}$ quenching condition.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.1
• /
• pp.34-39
• /
• 2014

This paper discusses the 3-level charge pumping (CP) method in planar-type Silicon-Oxide-High-k-Oxide-Silicon (SOHOS) and Silicon-Oxide-Nitride-Oxide-Silicon (SONOS) devices to find out the reason of the degradation of data retention properties. In the CP technique, pulses are applied to the gate of the MOSFET which alternately fill the traps with electrons and holes, thereby causing a recombination current Icp to flow in the substrate. The 3-level charge pumping method may be used to determine not only interface trap densities but also capture cross sections as a function of trap energy. By applying this method, SOHOS device found to have a higher interface trap density than SONOS device. Therefore, degradation of data retention characteristics is attributed to the many interface trap sites.

• Korean journal of applied entomology
• /
• v.17 no.2 s.35
• /
• pp.105-113
• /
• 1978

The experiments were carried out both at $#160$, Anyang Ri, Anyang, Kyung-gi Do, as a field plot and at college of Agriculture, Seoul National University, Suweon as laboratory plot, in order to unnorive the types of traps for collection of adult pine gall midge (Thecodiplosis japonensis Uchida) And the conclusions of the experimental results were as follows. (1) The seasonal fluctuation of the adult emergence of the PGM continued from middle pa.1 of the May to late part of the August. And the peak of the adult emergence showed variation in the number of PGM captured, according to the types of traps used, such as May 2g-june 2, by standard Cage, June 3-June7 by Funnel-A t.sp and June 8-June 12 by Suction-Trap. (2) The Percentage of the emergence in the laboratory experimental Plot were $41.06\%$ of Funnel-A traps used. f 3) The Suction-Trap was considered as effective instrument of. collection of adult PGM especially in the seasons of both earlier and later parts of the adult emergence, which is the population density is extremelty low. (4) It is considered that the recommendable instruments were Funnel-A type of trap and suction-Trap according to the experimental results obtained.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.46 no.3
• /
• pp.195-203
• /
• 2010

Recently, Fishermen have required to expand the circumference of trap entrance for conger eel because it was difficult to take the catch out as well as to put the baits into. A series of fishing experiments was carried out in coastal areas of Tongyoung, Korea in 2008 and 2009 using the traps to describe the effect of the entrance size on the catch. The experimental traps (five types) were used in filed experiments with four types circumference size traps (140, 180, 220 and 260mm) with mesh size 22mm and another type was used the same one usually using in filed with mesh size 35mm (750mm circumference). The experiment results were, the conger eels of total length 35mm more or so were caught 85, 93, 142 and 176 individual by the experiment traps with mesh size 22mm as increase circumference size from 140mm to 260mm, respectively. And the small conger eels of the total length below 35mm to be prohibited to catch by law were caught 145, 160, 288 and 304 individual according to increase the circumference size of trap, respectively. In addition, in case of the trap with mesh size 22mm, bycatches were 230 - 260 individuals and much more than bycatches of the trap with mesh size 35mm. In conclusion, when we expand the circumference size of trap according to fishermen's requirement, we should review not only economic of fishery but also increasement the bycatch of non-target fishes and small size fishes.

• Journal of Bio-Environment Control
• /
• v.27 no.3
• /
• pp.239-244
• /
• 2018

The effect of the trap equipped with diverse light-emitting lamp on the lure efficiency of whitefly (Trialeurodes vaporariorum) was investigated in the greenhouse cultivating tomato. The light-emitting lamp type equipped to trap was blue, yellow, and white light-emitting lamp. The experiment results showed that trap equipped with blue light-emitting lamp captured the most number of $110{\pm}3.2$ adult whitefly and the number of captured adult whitefly was $71{\pm}1.4$ at yellow light-emitting lamp trap and $45{\pm}1$ at white light-emitting lamp trap respectively. The wavelength distribution band of blue light-emitting lamp was between 330 nm and 430 nm. The wavelength band of yellow and white light-emitting lamp contain repellent wavelength band at the same time. These results show that the trap equipped with blue light-emitting lamp could be used effectively for whitefly control and prevention in the greenhouse cultivating tomato.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.10
• /
• pp.831-837
• /
• 2002

Scaled SONOS transistors have been fabricated by 0.35$\mu\textrm{m}$ CMOS standard logic process. The thickness of stacked ONO(blocking oxide, memory nitride, tunnel oxide) gate insulators measured by TEM are 2.5 nm, 4.0 nm and 2.4 nm, respectively. The SONOS memories have shown low programming voltages of ${\pm}$8.5 V and long-term retention of 10-year Even after 2 ${\times}$ 10$\^$5/ program/erase cycles, the leakage current of unselected transistor in the erased state was low enough that there was no error in read operation and we could distinguish the programmed state from the erased states precisely The tight distribution of the threshold voltages in the programmed and the erased states could remove complex verifying process caused by over-erase in floating gate flash memory, which is one of the main advantages of the charge-trap type devices. A single power supply operation of 3 V and a high endurance of 1${\times}$10$\^$6/ cycles can be realized by the programming method for a flash-erased type EEPROM.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.54 no.1
• /
• pp.73-80
• /
• 2018

Intermittent duty of emergency generator has problems emitting large quantities of PM and NOx in exhaust gas. The aim of this study is to propose DPF system which can be applied to medium-large emergency generators. The system is composed of soot dust collector, silencer and filter trap, which is designed to reduce PM emissions at the emergency generator start-up. The pneumatic system controls a flow direction of exhaust gas to pass through the soot collector and filter trap until the engine reaches complete combustion condition. An experiment is performed to measure PM content and concentration to analyze the performance and characteristics of the proposed system.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.4 no.6
• /
• pp.78-84
• /
• 1996

In order to eliminate TPM(Total Particulate Matter) from a diesel engine, we designed and developed a particulate trap system using a burner, which was named as AEFR(Active Exhaust Feeding Regeneration) system. We have considered the temperature distributions and gradients in the filter being regenerated according to regeneration control schemes Ⅰ, Ⅱ and Ⅲ. Schemes Ⅲ has shown the most desirable peak temperature and temperature gradients in AFER system. Finally, it was concluded that much lower peak temperature and temperature gradients in the filter could be obtained than that of other advanced research results by our AEFR system.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.58 no.2
• /
• pp.185-192
• /
• 2022

Fisheries is known as a high-risk industry in Korea, and various efforts have been made to reduce occupational accidents. Trap fisheries represent crustacean production, accounting for 4.7% of total fisheries production and 10.7% of its production value, which is classified as a relatively high-risk industry. With the disaster insurance payment data of the National Federation of Fisheries Cooperatives (NFFC) from 2016 to 2020, the accident rate of the entire fishery, the accident rate of trap fisheries, and the type of disasters in the past five years were analyzed. As a result, the average fishery accident rate for the past five years was 5.31%, but it was high at 6.15% for coastal trap fisheries and 5.59% for offshore trap fisheries. Slips and trips, struck by objects and contact with machinery were the most common types of the accident according to the characteristics of the work, and hand injuries were analyzed the most. Additional efforts, including education for accident prevention, development of personal protective equipment and improvement of the working environment, are needed to prevent accidents caused by repeated types of disasters.