• ETRI Journal
• /
• 제27권5호
• /
• pp.647-650
• /
• 2005

A new configuration to realize the most general n-th order voltage transfer function is proposed. It employs only one operational transresistance amplifier (OTRA) as the active element. In the synthesis of the transfer function, the RC:-RC decomposition technique is used. To the best of author's knowledge, this is the first topology to be used in the realization of n-th order transfer function employing single OTRA.

• 제어로봇시스템학회논문지
• /
• 제8권8호
• /
• pp.649-654
• /
• 2002

The essential philosophy of the QFT(Quantitative Feedback Theory) is that a suitable controller can be found by loop shaping a nominal loop transfer function such that the frequency response of this function does not violate the QFT bounds. The loop shaping synthesis involves the identification of a structure and its specialization by means of the parameter optimization. This paper presents an optimization algorithm to estimate the controller parameters from the frequency transfer function synthesis using the TLS(Total Least Squares) in the QFT loop shaping procedure. The proposed method identifies the parameter vector of the robust controller from an overdetermined linear system developed from rearranging the two dimensional system matrices and output vectors obtained from the QFT bounds. The feasibility of the suggested algorithm is illustrated with an example.

• 조명전기설비학회논문지
• /
• 제22권9호
• /
• pp.88-93
• /
• 2008

본 논문에서는 저차 근사모델에 대한 필터 보상형 PID 제어기의 주파수 전달함수 합성법을 제안한다. 제안된 방식은 주어진 주파수응답 경계조건에 맞는 필터 보상형 PID 제어기를 포함한 루프 주파수 전달함수의 합성에 의해 재배열된 일차연립방정식으로부터 PID 파라미터 벡터에 대한 최소 정규해를 결정하는 방식이다. 그리고 제안된 방식의 효율성을 입증하기 위한 예제로 충주 수력발전소의 수차속도제어계가 주어진다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 추계학술대회논문집
• /
• pp.201-206
• /
• 2000

In this work transfer function synthesis method based on FRF data of each substructure is investigated for a complex structure composed of many substructures. Though the transfer function synthesis method has superiority to analyze the characteristics of interfaces among substructures effectively, many problems arise in the computation process, especially matrix inversion process. Due to computational problems, the error between the data obtained by test and the predictions through computations is inevitable. So in this paper, computational aspects in the transfer function synthesis method are examined through a steering system problem of passenger car. For the FBS method, frequency response functions of 3 substructures are measured experimentally. Effects of several parameters such as matrix inversion method, connection conditions between substructures and off-diagonal terms on system response are studied numerically.

• 조명전기설비학회논문지
• /
• 제21권1호
• /
• pp.10-18
• /
• 2007

We synthesize and analyze the optical transfer function(OTF) of the modified triangular interferometer(MTI) using two-pupil synthesis method and we present the optimal MTI, which can obtain any bipolar function by combining a wave plate and a linear polarizer. Also, we analyze its potential phase error sources caused by polarization components.

• 조명전기설비학회논문지
• /
• 제18권2호
• /
• pp.29-35
• /
• 2004

Two-pupil 합성방법을 이용하여 변형 삼각간섭계의 광전달함수를 합성하고 분석하였다. 그리고, 변형 삼각간섭계의 경우에 two-pupil 방법을 사용함으로써 바이폴라 함수를 구하여 바이어스가 제거된 복소홀로그램을 얻을 수 있다는 것을 입증하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.517-522
• /
• 2002

The frequency response function(FRF) of each substructure is used for the transfer function synthesis method(TFS). The dynamic characteristics of the full system are obtained by synthesizing FRFs of each substructure. The validation of TFS depends on accuracy for FRF of each substructure. Impact hammer testing is widely used to obtain the modal characteristics of structures. However, the FRF obtained from impact hammer testing contains several errors, such as finite record length error and leakage error of which characteristic depends on data acquisition time which we call record length. In this paper, a method to remove these errors is proposed so as to enhance results of TFS. Numerical examples show that the FRF of full structure can be predicted exactly by the method proposed in this paper.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문초록집
• /
• pp.354.2-354
• /
• 2002

The frequency response function(FRF) of each substructure is used in the transfer function synthesis method(TFS). The dynamic characteristics of an entire system are obtained by synthesizing results of substructures. The accuracy of TFS will depend on that of FRF of each substructure. The impact hammer testing is widely used to obtain the modal characteristics of substructures. (omitted)

• Journal of the Optical Society of Korea
• /
• 제8권4호
• /
• pp.182-187
• /
• 2004

We synthesized and analyzed the optical transfer function(OTF) of the modified triangular interferometer (MTI) using two-pupil synthesis method. Also, we presented the optimal MTI, which can obtain any bipolar function by combining two wave plates and a linear polarizer. By using the proposed MTI, we can obtain the complex hologram without bias and conjugate image.

• 전기학회논문지P
• /
• 제54권1호
• /
• pp.34-40
• /
• 2005

This paper presents a frequency transfer function synthesis for simplifying a high-order model with time delay to a low-order model. A model reduction is based on minimizing the error function weighted by the numerator polynomial of reduced systems. The proposed method provides better low frequency fit and a computer aided algorithm. And in this paper, we present a design method of PID controller for achieving the desired specifications via the reduced model. The proposed method identifies the parameter vector of PID controller from a linear system that develops from rearranging the two dimensional input matrices and output vectors obtained from the frequency bounds.