• 한국응용과학기술학회지
• /
• 제27권4호
• /
• pp.407-414
• /
• 2010

New biological treatments were being developed at a record place, but their potential could be compromised by a significant obstacle: the delivery of these drugs into a body. Pharmaceutical delivery is now nearly as important as product. New systems are being developed, and Drug Delivery Markets Series cover these new systems. Transdermal Delivery System(TDS) is often used as a method of drug dosage into the epidermic skin. An approach used to delivery drugs through the skin for therapeutic use as an alternative to oral, intravascular, subcutaneous and transmucosal routes. Various transdermal drug delivery technologies are described including the use of suitable formulations, carriers and penetration enhancers. The most commonly used transdermal system is the skin patch using various types of technologies. Compared with other methods of dosage, it is possible to use for a long term. It is also possible to stop the drug dosage are stopped if the drug dosage lead to side effect. Polysaccharides, such as karaya gum and glucomannan, were selected as base materials of TDS. Also, these polymers were characterized in terms of enhancers, drug contents. Among these polysaccharide, the permeation rate of karaya gum matrix was fastest in fibric acid(ciprofibrate) such as lipophilic drug in vitro. We used glycerin, PEG400 and PEG800 as enhancers. Since dermis has more water content(hydration) than the stratum corneum, skin permeation rate at steady state was highly influenced when PEG400 was more effective for lipophilic drug. Proper selection of the polymeric materials which resemble and enhance properties of the delivering drug was found to be important in controlling the skin permeation rate. Especially, this result suggests a possible use of polysaccharide gel ointment matrix as a transdermal delivery system of anti-hyperlipoproteinemic agent.

• 약학회지
• /
• 제34권6호
• /
• pp.429-433
• /
• 1990

Transdermal patches and polymer membrane were prepared and evaluated for their ability to antiviral agent in vitro. The membrane perpared with styrene and HEMA by 0.5 and 10% of styrene composition. And the transdermal patches were fabricated with this membrane and silastic silicone sheeting. The antiviral agents used were ACV, BVDU and FEAU. The higher HEMA content membranes exhibited relatively high release rate of each drug. Permeation was enhanced by increasing of drug concentration. The parameters of each drug in diffusion experiment with styrene-HEMA membrane were investigated.

• Archives of Pharmacal Research
• /
• 제28권1호
• /
• pp.111-114
• /
• 2005

The antihistamine effects of the triprolidine were studied in rats to determine the feasibility of their enhanced transdermal delivery from the poly (4-methyl-1-pentene) (TPX) matrix system containing penetration enhancer and plasticizer. The antihistamine effects were determined by the Evans blue dye procedure by comparing the changes in vascular permeability increase following the transdermal administration. The vascular permeability increase was significantly reduced by transdermal administration of the triprolidine-TPX system containing triethyl citrate (TEC) and polyoxyethylene-2-oleyl ether (POE). Both the plasticizer and penetration enhancer played an important role in the skin permeation of triprolidine and increased the antihistamine effects. These results showed that the triprolidine-TPX matrix system containing plasticizer and penetration enhancer could be a transdermal delivery system providing the increased antihistamine effects.

• 약학회지
• /
• 제43권4호
• /
• pp.447-457
• /
• 1999

The purpose of this study is to prepare the adhesive type patch containing flurbiprofen, and to demonstrate the feasibility of flurbiprofen administration through the intact skin using adhesive type patch preparation. For this purpose, two pressure sensitive adhesives, Polyisobutylene(PIB) and $Gelva^{\circledR}737$, were selected from the chemical grade of polymers, and the adhesive type patches of flurbiprofen were prepared. The release rate of flurbiprofen from the PIB-based adhesive patch was higher than that from $Gelva^{\circledR}737$ based adhesive patch. The release rate of flurbiprofen from the PIB-based A-type patch with 1.0mm, 1.5mm or 2.0mm thicknesses followed the first order kinetics. In the skin permeation study, using male hairless mouse skin, a monophasic skin permeation profile was observed with 1% flurbiprofen loading dose. The inclusion of palmitic acid or SLS(0.25~0.5%) as an enhancer produced a remarkable enhancement in the skin permeation rate of flurbiprofen, and the percentile ratio of drug and enhancer appeared to be important for the effective enhancement. In the in vivo percutaneous absorption study, the plasma concentration of the optimal formulation was significantly (p<0.01) higher than that of the conventional cataplasma ($Bifen^{\circledR}$). These studies demonstrate a good feasibility of flurbiprofen administration through the intact skin using a transdermal patch, and show a possibility of the development of flurbiprofen patches.

• Journal of Pharmaceutical Investigation
• /
• 제36권2호
• /
• pp.97-102
• /
• 2006

The aim of this study was to investigate the feasibility and optimize permeability of slim patch type as a transdermal delivery system of caffein. Slim patch type was formulated and tested in modified Franz diffusion cell across cellulose membrane and hairless mouse skin in pH 5.8 phosphate buffer solution (PBS). The effect of $Pharmsolv^{\circledR}$ and drug concentration on permeation at four model, 1,2% $Pharmsolv^{\circledR}$ with $0.12\;mg/cm^2$ caffein and 0.12, $1.2\;mg/cm^2$ caffein with 2% $Pharmsolv^{\circledR}$ through hairless mouse skin was studied in vitro. The release of caffein from slim patch with various loading was fitted by the Higuchi's diffusion equation. The result showed that chemical $Pharmsolv^{\circledR}$ produced a large and significant increase of permeation. The effect of 2% $Pharmsolv^{\circledR}$ on permeation of caffein was greater about 10-fold greater than 1% $Pharmsolv^{\circledR}$ in first 60 minutes. The effect of drug concentration, however, was lower than that produced by chemical $Pharmsolv^{\circledR}$. Within the tested system, the most efficient combination for caffein slim patch type was $0.12\;mg/cm^2$ caffein with 2% $Pharmsolv^{\circledR},$ although $1.2\;mg/cm^2$ caffein with 2% $Pharmsolv^{\circledR}$ showed highest amounts permeation, because permeated percentages were significantly lower about $1/4{\sim}1/5$ times.

• Journal of Pharmaceutical Investigation
• /
• 제38권1호
• /
• pp.45-50
• /
• 2008

5-Fluorouracil (5-FU) is an antimetabolic of the pyrimidine derivatives that is used in chemotherapy for the treatment of several types of cancer. 5-FU have poor oral absorption and short biological half-time and strong side effects. Microneedle introduced to find a solution of problems. Microneedle device with roll was manufactured for transdermal delivery of various drugs. 5-FU was mixed in non-ionic surfactant such as tween 20 and tween 80. Camscope was used to analysis the permeation magnitude of treated skin by microneedle and trypan blue staining. The 5-FU solution with surfactant measured by ZETA-potential analysis system for stability of solution. The skin permeation rate of 5-FU determined by HPLC. We confirmed that cross treated skin was dyed more deeply than parallel treated skin through trypan blue staining. The results indicate that skin permeation rate of 5-FU was increased with the treatment types and treatment times.

• Journal of Pharmaceutical Investigation
• /
• 제38권6호
• /
• pp.357-363
• /
• 2008

Penetration rate of large molecule through skin is very low due to the barrier effect of stratum corneum. Novel microneedle treatment device with roll was designed for transdermal delivery of large molecular drugs such as vaccine and protein drugs. The permeation rates of FITC labelled bovine serum albumin (FITC-BSA) as a model protein were determined using modified Franz diffusion cell and hairless mouse skin which were treated by hydrogel or solution containing FITC-BSA. Fluorescent spectrophotometer was used to analyze the concentration of FITC-BSA. Microscope using fluorescent filter was used to capture the image and location of FITC-BSA in the skin. We confirmed that permeation rate of BSA was increased with the treatment by microneedle and was increased by the increasing frequency of treatment. Furthermore, the permeation rate observed from hydrogel treated skin was significantly higher than that from solution treated skin.

• 한국응용과학기술학회지
• /
• 제29권4호
• /
• pp.552-560
• /
• 2012

약물 전달 시스템은 약물의 방출 프로파일, 흡수, 분배 및 제품의 효율성과 안전성, 환자의 편의성과 협조를 향상시키기 위한 제거를 개선하는 명백하게 보호화된 공식화 기술이다. 가장 일반적으로 쓰이는 transdermal 시스템은 다양한 종류의 기술을 사용하는 skin patch다. 다른 투약 방법과 달리, transdermal 시스템은 장기간 사용이 가능하다. 또한, 부작용이 생길 경우, 약물 투약의 중단이 가능하다. karaya gum and locust bean gum(LBG)/water-soluble chitosan oligomer(WSCO)과 같은 Polysaccharide를 TDS의 기본 물질로 선택하였다. 또한, 이 polymers들은 tacrine 물질, 강화제로 규정되어진다. 이러한 polysaccharide 중에서, karaya gum matrix의 침투율은 lipophilic drug in vitro 와 같은 tacrine 내에서 가장 빠르다. 우리는 glycerin, PEG 400, and PEG 800를 강화제로 사용하였다. 그러므로, transdermal의 tacrine 흡수율은 vehicle 구성을 바꿈으로써, 혹은 침투 강화제를 사용함으로써 향상되었을 것이다. 특히, vehicle이 스스로의 효과를 강화하는 것과 더불어, vehicle에 강화제를 첨가함으로써 높은 침투 효율이 얻어질 것으로 기대된다.

• Journal of Pharmaceutical Investigation
• /
• 제28권1호
• /
• pp.1-5
• /
• 1998

The effect of synthetic polymer membranes on the permeation rate of dideoxynucleoside-type anti-HIV drugs through hairless rat skin was studied using ethylene/vinyl acetate copolymer (EVA) and ethylene/methyl acrylate copolymer (EMA) membranes fabricated by solvent casting method. In vitro skin permeation kinetics study of DDC (2',3'-dideoxythymidine), DDI (2',3'-dideoxyinosine) and AZT (3'-azido-3'-deoxythymidine) across the (membrane/skin) composite was conducted for 24 hours at $37^{\circ}C$ using the Valia-Chien skin permeation system. The results showed that skin permeation rate of each drug across the (skin/membrane) composite was mainly dependent on the property of the membrane. Proper selection of the polymeric membrane which resembles hydrophilicity/lipophilicity of the delivering drug was important in controlling the skin permeation rate.

• Journal of Pharmaceutical Investigation
• /
• 제37권5호
• /
• pp.281-286
• /
• 2007

For transdermal delivery of porcine placenta extract (PPE), various emulsion formulations were prepared and evaluated. Polysorbate surfactants were used as emulsifiers and various C-18 unsaturated fatty acids as enhancers. The skin permeation of PPE was tested using a cellulose nitrate membrane-loaded Franz cell apparatus. Among emulsifiers, Tween 20 provided higher penetration effect than did Tween 80. Meanwhile, of various fatty acids, linolenic acid (18:3) revealed the highest skin permeation of PPE than the other C-18 unsaturated fatty acids. Stability of PPE emulsions was determined by cycles of freezing and thawing processes. The stability of emulsions depended on the percentage of Tween 20. Minimum 20% of Tween 20 was required to stabilize emulsions at room temperature for several days. Taken together, our results suggest that Tween 20 and linolenic acids might be key components to formulate PPE emulsion to provide the desirable skin permeability and stability.