• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.3
• /
• pp.62-73
• /
• 2008

In this paper, domestic standard revision plan of dynamic frequency method which is used both in unmanned automatic toll collection system and manned collection system of the express highway is presented. For such ETCS, the infrared rays (870 nm) of active frequency method and the frequency integrated method (5.8 GHz) are adopted and extended to be operated to the all around the Toll Gate. This standardization plan is based on inter connection reference model between OSI (Open System Interconnection) in process of ITS short range radio communication standardization of 5.8 GHz bandwidth to support traffic information and control system service, and the derived revision plan by starting from physical layer which support interoperability for multiple access between RSE (Road Side Equipment) and OBE (On Board Equipment), in which is categorized into physical layer, data link layer, and application layer. In case of radiation power, existing standard is divided by class1 (within 10 m) and Class2 (within 100 m) according to transmission lengthwhile it is operated with just single standard 'Class1' because of notification of Ministry of Information and Communication in 2004. In the case of the limitation value of incident power in communication area, considering operation plan of ETCS that is on actuality operation the measurements are reflected to the standard. In other wort this paper proposed the improvement standard of incident power, pseudo response in the communication area and radiated power in order to secure stability and compatibility among operator systems about the needed part on ETCS operation.

• Proceedings of the Korean Information Science Society Conference
• /
• 1998.10a
• /
• pp.480-482
• /
• 1998

최근, 멀티캐스트 기법을 사용하는 멀티미디어 응용 프로그램들이 인터넷에 등장하고 있다. 이들 응용 프로그램들의 성공 여부는 수신자들에게 전송되는 음성/영상의 품질에 의해 좌우된다. 인터넷은 응용프로그램의 QoS(Quality of Service) 에 대한 요구를 보장할 수 없기 때문에 멀티케스트 트래픽(multicast traffic)을 위하여 인터넷의 성능을 최대한 효율적으로 이용할 수 있도록 흐름제어에 대한 많은 연구가 진행되고 있다. 그 중 IVS(INRIA Video conferencing System)에서 제안한 멀티캐스트 트래픽 흐름제어 알고리즘은 수신자가 주기적으로 전달하는 RTCP 의 패킷손실 정보에 의해 송신자가 전송율을 조절하는 것이다. 그러나 이 알고리즘은 네트워크 상태가 무부하(unload)임에도 불구하고 느린 피드백으로 인하여 가용 네트워크 대역폭을 빠르게 파악하지 못하기 때문에, TCP트래픽과 경쟁 상태에서 네트워크 대역폭을 불공정(unfairness)하게 사용하게 되고 네트워크 상태에 알맞는 전송율을 결정하지 못한다. 본 논문에서는 더욱 공정하게 대역폭을 공유할 수 있고 전체 링크 이용율을 높이는 두 가지 기법을 제안한다. 첫째, 측정된 네트워크 혼잡상태에 따라 RTCP 피드백의 전송 빈도를 동적으로 조절하는 것이다. 둘째, TCP와 같이 전송율을 증가/감소시킴으로써 공정하게 네트워크를 공유하도록 하는 것이다. 본 논문에서는 이 두 가지 기법들이 TCP 트래픽에 영향을 주지 않고 또한 RTCP피드백의 양을 증가시키지 않으면서도 공정하게 네트워크 대역폭을 공유함으로써 링크의 이용율을 높일 수 있다는 것을 시뮬레이션을 통하여 보여준다.안 모니터링 기 능 등으로 조사되었다.도 멜-켑스트럼을 사용한 경우 67.5%, K-L계수를 사용한 경우 75.3%로 7.8%의 향상된 인식률을 보였으며 K-L계수와 회귀계수를 결합한 경우에서도 비교적 높은 인식률을 보여 숫자음에 대해서도 K-L계수의 유효성을 확인할 수 있었다..rc$ 구입할 때 중점적으로 살펴보는 사항은 신선도와 순수재래종 여부, 위생상태였다. 한편 소비자가 언제나 구입할 수 없다는 의견이 85.2%나 되어 원활한 공급과 시장조성이 아직 정착되지 않고 있었다. $\bigcirc$ 현재 유통되고 있는 재래종닭은 소비자 대부분이 잡종으로 인식하고 있었으며, 재래종과 일반육계와의 구별은 깃털색, 피부색, 정강이색등 외관상으로 구별하고 있었다. 체중에 대한 반응은 너무 작다는 의견이었고, 식품으로의 인식도는 비교적 고급식품으로 인식하고 있다. $\bigcirc$ 재래종닭고기의 브랜드화에 대한 견해는 젊고 소득이 높은 계층에서 브랜드화의 필요성을 강조하고 있다. $\bigcirc$ 재래종달걀의 소비형태는 대부분의 소비자가 좋아하였으나 아직 먹어보지 못한 응답자가 많았다. 재래종달걀의 맛에 대해서는 고소하고 독특하여 차별성을 느끼고 있었다. $\bigcirc$ 재래종달걀의 구입장소는 계란판매점(축협.농협), 슈퍼, 백화점, 재래닭 사육 농장등 다양하였으며 포장단위는 10개를 가장 선호하였고, 포장재료는 종이, 플라스틱, 짚의 순으로 좋아하였다. $\bigcirc$ 달걀의 가격은 200원정도를 적정하다고 하였으며, 크기는 (평균 52g)는 가장 적당하다고

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.772-776
• /
• 2004

This paper proposes an interference avoidance approach for Constraint-Based Routing (CBR) algorithm in the Multi-Protocol Label Switching (MPLS) network. The MPLS network itself has a capability of integrating among any layer-3 protocols and any layer-2 protocols of the OSI model. It is based on the label switching technology, which is fast and flexible switching technique using pre-defined Label Switching Paths (LSPs). The MPLS network is a solution for the Traffic Engineering(TE), Quality of Service (QoS), Virtual Private Network (VPN), and Constraint-Based Routing (CBR) issues. According to the MPLS CBR, routing performance requirements are capability for on-line routing, high network throughput, high network utilization, high network scalability, fast rerouting performance, low percentage of call-setup request blocking, and low calculation complexity. There are many previously proposed algorithms such as minimum hop (MH) algorithm, widest shortest path (WSP) algorithm, and minimum interference routing algorithm (MIRA). The MIRA algorithm is currently seemed to be the best solution for the MPLS routing problem in case of selecting a path with minimum interference level. It achieves lower call-setup request blocking, lower interference level, higher network utilization and higher network throughput. However, it suffers from routing calculation complexity which makes it difficult to real task implementation. In this paper, there are three objectives for routing algorithm design, which are minimizing interference levels with other source-destination node pairs, minimizing resource usage by selecting a minimum hop path first, and reducing calculation complexity. The proposed CBR algorithm is based on power factor calculation of total amount of possible path per link and the residual bandwidth in the network. A path with high power factor should be considered as minimum interference path and should be selected for path setup. With the proposed algorithm, all of the three objectives are attained and the approach of selection of a high power factor path could minimize interference level among all source-destination node pairs. The approach of selection of a shortest path from many equal power factor paths approach could minimize the usage of network resource. Then the network has higher resource reservation for future call-setup request. Moreover, the calculation of possible path per link (or interference level indicator) is run only whenever the network topology has been changed. Hence, this approach could reduce routing calculation complexity. The simulation results show that the proposed algorithm has good performance over high network utilization, low call-setup blocking percentage and low routing computation complexity.

• Journal of Korea Society of Industrial Information Systems
• /
• v.9 no.3
• /
• pp.71-79
• /
• 2004

Owing to the rapid increase of the number of automobiles, the traffic is being heavily crippled as time goes by. To provide drivers with better safety and convenience, a variety of CNSs(Car Navigation System) are being installed more and more specially for the vehicles which are produced in recent days. As the CNS has gained the public popularity, it has been playing a role as a component of the multimedia system in a vehicle in addition to providing the capability of route guidance service. It is, therefore, now recognized as an important unit of the vehicle interior system. As the situation has been changed as formerly described, it is necessary that not only the functions but also the usability and exterior features are to be designed to suit customers' tastes. This paper is an attempt to find out what the major sensibility factors which customers want as far as a CNS is concerned are. Because these factors can differ from a vehicle type to another that customers prefer, the analysis is based on the vehicle preference. It is proved that MDS(Multi Dimensional Scaling) is an effective method to analyze the sensibility factors for the different types of vehicles. The result shows that for the people who prefer the sedan-type vehicles, luxuriousness, harmoniousness, and texture are major factors. For people who like sports car, faminism, salience, and dynamics are major factors. For people who prefer SUV's(Sports Utility Vehicle) or MPV's(Multi Purpose Vehicle), solidity, dynamics, and convenience are important.

• Journal of KIISE:Information Networking
• /
• v.37 no.4
• /
• pp.272-283
• /
• 2010

Wireless Mesh Networks (WMNs) have gained a lot of attention recently. Based on the characteristic of WMNs as a highly connected wireless infrastructure, many efforts from research organizations are made in order to improve the performance of the flow throughput in WMNs. Therefore, it is very critical issue to establish efficient routing paths for multiple concurrent ongoing flows. In this paper, we propose a general modeling methodology to analyze the end-to-end throughput of multiple concurrent flows by analytical calculation taking into account the carrier sensing behaviors, interference and the IEEE 802.11 Distributed Coordination Function mechanism. After the comparison of the average service time for each successful transmission at each node, we analyze the bottlenecks of flows, and hence obtain the maximum end-to-end throughput of them. By using our proposed model, it is possible to predicate the throughput of several candidate routing paths for multiple concurrent ongoing data flows, so we can select the most efficient route that can achieve the highest throughput. We carry out simulations with various traffic patterns of multiple flows in WMNs to validate our modeling and our efficient route selection mechanism.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.1
• /
• pp.110-122
• /
• 1993

When voice is transmitted through packet switching network, there needs a overload control, that is, a control for the congestion which lasts short periods and occurrs in local extents. In this thesis, we analyzed the performance of the statistical packet voice multiplexer using the overload control strategy by bit dropping. We assume that the voice is coded accordng to (4,2) embedded ADPCM and that the voice packet is generated and transmitted according to the procedures in the CCITT recomendation G. 764. For the performance analysis, we must model the superposed packet arrival process to the multiplexer as exactly as possible. It is well known that interarrival times of the packets are highly correlated and for this reason MMPP is more suited for the modelling in the viewpoint of accuracy. Hence the packet arrival process in modeled as MMPP and the matrix geometric method is used for the performance analysis. Performance analysis is similar to the MMPP IG II queueing system. But the overload control makes the service time distribution G dependent on system status or queue length in the multiplexer. Through the performance analysis we derived the probability generating function for the queue length and using this we derived the mean and standard deviation of the queue length and waiting time. The numerical results are verified through the simulation and the results show that the values embedded in the departure times and that in the arbitrary times are almost the same. Results also show bit dropping reduces the mean and the variation of the queue length and those of the waiting time.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.10
• /
• pp.34-40
• /
• 2014

With the economical data service delivery, the packet transport network (PTN) technologies have emerged as an important player in the next-generation transport networks. As the PTN continues to make such considerable progress, it is being challenged by network providers who need rapid and reliable recovery capabilities to guarantee the availability of their services. This paper introduces several fault detection mechanisms for a client signal failure in packet transport networks and proposes a reliable transmission method of IP flows from routers using the combination of Ethernet services. Based on the first fault detection methods, client signal fault is detected within tens or hundreds of milliseconds. It enables the client network devices to perform their own recovery processes within one second. The second mechanism enables failed Ethernet services to be bypassed via other Ethernet services over disjoint paths, so as to contribute on reducing packet loss of IP traffic.

• Journal of Cadastre & Land InformatiX
• /
• v.49 no.2
• /
• pp.135-149
• /
• 2019

This article analyzed economic effects of changes in spatial accessibility on regional touruism expenditure structure resulting from highway investments on Gangwon province, Korea. The Seemingly Unrelated Regress(SUR) model is applied to analyze the structure of change in tourism expenditure of Gangwon Province, and the competition and complementary relationship of tourist demand were analyzed among 18 counties in Gangwon by Dendrinos-Sonis method. The spatial accessibility has a significant effect on the increase in amount of tourist expenditure, but by 1% increase in the accessibility resulted in a reduction of length of stay -0.18% and travel costs -0.34% by respectively. The most powerful variable for improving the on-site economy is the tourist service establishment, which increases one unit, the amount of tourist expenditure increased by 3.6%. Moreover, the competition and supplemental relationship of tourism demands in Gangwon was decided by the conditions under which traffic flow with passing occurred, such as inland or ocean-typed travel attractions, adjacent or remote regions to the highway. The limitations of this study were not able to use raw data of tourism expenditures before and after the opening the highway due to the restriction of priority data, and further research on the appropriate level of spatial accessibility for the regional economy is needed.

• The Journal of Natural Sciences
• /
• v.8 no.2
• /
• pp.225-236
• /
• 1996

Computer simulation methods for three area of textile design, wearing, and design were developed by using CAD system, and its results were applied to pattern design simulation. Textile design created by using the CAD system was applied to T-shirt schematization. Created wearing, printing, and knitting design respectively were applied to women clothing, children's wear, and men sweater. In this rearch, several equipped since various color working, materials, pattern development and swift intention decision of goods direction are possible on the moniter. Third, many goods order are rushed within short time because spot direction are possible on the moniter. Third, many goods order are rushed within short time because intention decision of buyer could be induced and embodied design almost reflection the buyer's will on the spot before production of goods and samples. Forth, time and expense were saved to get the information in terms of design information systematically and could be managed annually. Fifth, creative design development can be not only availed but saved the service expense of outside orders and the traffic expense.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.146-149
• /
• 2013

For in recently years, global cellular network service is changing rapidly to 4G. However, the fast introducing of 4G has been going with not enough research about security threat, it could be many kind of vulnerability. Therefore the research about security threat on 4G network is ongoing in external countries, but not sufficient in domestic. particularly in domestic situation of rapidly increased subscribers, The security threats which are hindering stability and usability could make a fatal effect on many users. 4G network should be considered about the feature of mobile network to protect 4G network stable. Mobile network has limited radio resources, it releases the radio resource which is not used in selected time and reallocate when detected the data transmission. Many signaling messages are transferred in the network entities to allocate or release the radio resource. In this paper, it will be introduced the technology to detect signaling DoS traffic hindering the stability and usability of network entities managing the radio resources by huge signaling message from the repetitive wireless connection/release message.