• 방송공학회논문지
• /
• 제15권4호
• /
• pp.487-497
• /
• 2010

본 논문은 3GPP LTE (Long Term Evolution) 시스템에서 목표 셀과 서빙 셀 간의 부하 차이에 따라서 히스테리시스 값과 타임-투-트리거 값들과 같은 중요한 핸드오버 파라미터를 적응적으로 적용하는 하드 핸드오버 방식을 제안한다. 먼저, 히스테리시스 값을 서빙 셀과 목표 셀의 부하 차이에 따라서 자동적으로 조절하고 그 자동 조절된 히스테리시스 값을 핸드오버 트리거 (Trigger) 시간을 결정하는데 사용한다. 따라서 그러한 적응 히스테리시스 방법을 통하여 핸드오버 실패율은 개선된다. 그러나 이러한 적응 히스테리시스 방식은 셀 경계에서 잦은 단말들의 이동에 의해서 발생하는 핑퐁 현상이 증가하는 문제를 야기한다. 따라서 그러한 문제점을 해결하기 위해서 본 논문에서는 적응 히스테리시스 방식에 의해서 설정된 히스테리시스 (Hysteresis)값에 반비례하는 타임-투-트리거 (Time-to- trigger)값을 선택하는 적응 히스테리시스 기반의 적응 타임-투-트리거 방식을 제안한다. 시뮬레이션을 통하여 본 논문에서 제안한 적응 히스테리시스 기반의 적응 타임-투-트리거 방식이 기존의 고정 히스테리시스 방법과 적응 히스테리시스 방법 기반의 고정 타임-투-트리거 방식보다 핸드오버 실패율과 핑퐁 (Ping-pong) 발생률 측면에서 더 우수함을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.1333-1335
• /
• 2000

In order to turn on the SCR gate, trigger signal source have to provide appropriate gate current and voltage under the gate rating based on the characteristic of SCR, the nature of load and power. It will be essential design factors such as trigger source impedance, trigger signal occurring, signal time width and turn off conditions. Also minimum gate trigger current is changed with the deterioration of SCR. SCR, which is needed large gate trigger current absolutely, is very important for SCR characteristic test because it causes unstable output in the misfile or makes a trouble to pulse trigger circuits. This paper shows scheme to test the performance of SCR with the precision analyzing mechanism and the changing trend of minimum gate current under the trigger conditions.

• 센서학회지
• /
• 제24권6호
• /
• pp.398-403
• /
• 2015

In this paper, the sine-wave and trigger pulse generator with capability of frequency high-resolution and time-variable trigger edge has implemented. It fulfills well the requirements for SS-OCT with frequency resolution of 1 Hz, frequency stability of ${\leq}{\pm}0.03Hz$ and time-variable trigger edge. Through its performance test applied to the wavelength swept laser, 90 nm, sweeping range and 10mW average optical power were obtained. This showes that the realized generator can replace the commercial high cost and high performance signal generators employed by current SS-OCT systems.

• 대한전기학회논문지:전력기술부문A
• /
• 제49권7호
• /
• pp.359-364
• /
• 2000

This paper is introducing a newly developed spark-gap switch with dual trigger system, into which the current from the voltage source is injected along with the test sequence during the synthetic testing of high voltage circuit-breaker. The currently-used spark gap switch is narrow in operating range due to the use of the method of triggering energy being injected by single way. As a result, the frequent happening of misoperation has greatly reduced the test quality and test efficiency and has required the cost of maintenance excessively. In this study, accordingly, in order to basically remove these problems, another triggering system is installed to the opposite direction on the existing triggering system; attaching the same time and the same rising time of pulse wave as on the existing system, so that at a comparatively trigger gap distance from the main electrode(the gap can be operated at 60% of self-break voltage, while at 80% in the current system), the main electrode has been enabled to be closed by the development of spark gap switch with dual trigger system.

• 조명전기설비학회논문지
• /
• 제24권9호
• /
• pp.159-164
• /
• 2010

We experiment to analyze on current limiting and recovery characteristics of trigger type SFCL as the composition of the contact. Generally, some superconductor of SFCL is relatively largely loaded due to limit the fault current by oneself and recovery time is affected until the fault cleared. However, in the fault, the proposal trigger type SFCL transfer the fault current to current limiting reactor(CLR) using power switch so it could reduce the recovery time and load of the superconductor. However, because of applying the additional power switches, that could generate some power loss. Therefore, to solve this problem, we proposed the composition method of the double contact for a trigger type SFCL and analyzed on current limiting and recovery characteristics for ones.

• 대한물리치료과학회지
• /
• 제3권4호
• /
• pp.181-187
• /
• 1996

The purpose of this study is to help understand the pressure pain threshold's comparison following time progress after IMS to the trigger point and recognize this methode' effect for treating these kind of myofascial pain syndrome in clinic. Resently, myofascial pain syndrome is a disease that keeps the highest rate of patients visiting the Department of Rehabilitation Medicine. and so one should understand the change of IMS'effect following time progress for patients to be dealt rightly in clinic. In addition, the theory and treatment of myofascial pain syndrome needs to be understood or to be dealt rightly for therapists to treat and to approach to the right moment in right mode for the patients with myofascial pain syndrome. Therefore, one should know where to stimulate and why one stimulate trigger point and what effect one obtain after IMS.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2007년도 추계종합학술대회
• /
• pp.75-78
• /
• 2007

Mobile IP는 단말기에 이동성을 부여해 줌으로써 이동중에도 network업무를 수행할 수 있게 해주었다. 하지만 Access Router간에 이동시 발생되는 handover의 시간으로 인하여 지연과 date loss의 문제점이 발생한다. 이를 해결하기 위하여 많은 연구가 진행되고 있다. IEEE802.21에거 표준화가 진행중이 MIH(media Independent Handover)는 이종망간 handover를 지원하기 위한 프로토콜이다. NIH는 주변 망의 Layer2 정보와 Layer3 정보 등의 네트워크 정보를 사전에 획득하도록 설계되어있다. MIH의 사전정보 획득기술을 활용하면 MN(Mobile Node)에서 handover 발생시 획득해야 하는 정보를 미리 얻을 수 있고 보다 효율적으로 망을 구성할 수 있다. 본 논문은 MIPv4에서 MIH를 활용하여 MN(Mobile Node)가 handover 할 것으로 예측될 때 MIH Table를 이용하여 Handover에 사용되는 정보를 미리 구축해 둔다. 이로써 Handover가 예측될 때 L2Trigger가 가지는 Init time을 개선시키고, 나아가 짧아진 init time 으로 AR간에 보다 협소한 overlap Length를 가지고 handover를 행할 수 있음을 확인할 수 있었다.

• 대한전기학회논문지
• /
• 제43권7호
• /
• pp.1050-1060
• /
• 1994

This paper is a study on the computer simulation of the characteristics of the superconducting fault current limiter. Input variable parameters are apparent power, load resistance value, line resistance value and so on. Initial fault current 2 times larger than the trigger current is required to reduce the switching time of SFCL. The propagation velocity increases abruptly, the transport current is several times larger than the ciritical current. In this paper, the switching time is calculated to be 323$\mu$ sec, and the initial fault current is 19 times larger than the critical current. Because the trigger coils are bifilar winding, they have little impedance in superconducting state. After fault occurred, the limiting coil acts as a superconducting reactor and the trigger coils quench at a critical current. Without the SFCL in the circuit, fault current after the load impedence is shorted might be increased to 1100A. The fault current is, therefore, successfully limited by the superconducting limiting coil to 100A determined by the coil inductance.

• ETRI Journal
• /
• 제35권5호
• /
• pp.797-807
• /
• 2013

In this paper, an input receiver with a hysteresis characteristic that can work at voltage levels between 0.9 V and 5 V is proposed. The input receiver can be used as a wide voltage range Schmitt trigger also. At the same time, reliable circuit operation is ensured. According to the research findings, this is the first time a wide voltage range Schmitt trigger is being reported. The proposed circuit is compared with previously reported input receivers, and it is shown that the circuit has better noise immunity. The proposed input receiver ends the need for a separate Schmitt trigger and input buffer. The frequency of operation is also higher than that of the previously reported receiver. The circuit is simulated using HSPICE at 0.35-${\mu}m$ standard thin oxide technology. Monte Carlo analysis is conducted at different process conditions, showing that the proposed circuit works well for different process conditions at different voltage levels of operation. A noise impulse of ($V_{CC}/2$) magnitude is added to the input voltage to show that the receiver receives the correct logic level even in the presence of noise. Here, $V_{CC}$ is the fixed voltage supply of 3.3 V.

• Clinics in Shoulder and Elbow
• /
• 제1권2호
• /
• pp.193-197
• /
• 1998

Frozen shoulder is known as a self-limited disease. But, its long duration and pain nature can make the patients debilitative. And most patients cannot tolerate a chronically painful extremity and are concerned about the possibility of developing permanent dysfunction. In painful phase of frozen shoulder, some aggressive mordalties as like trigger point injection or suprascapular nerve block can beneficial to: reduce discomfort and pain. In order to document clinical results, we evaluated the results of 134 frozen shoulders treated with trigger point injection and/or suprascapular nerve block at Kyungpook National University Hospital, from January 1995 to April 1997. The treatment group was divided into 3 modalities: 17 cases in trigger point injection(TPI), 39 cases in suprascapular nerve block(SSB), and 78 cases in both methods. The supportive treatment including oral medication, heat and stretching exercise was also applied. The average age at the time of diagnosis was 57 years old and average follow-up time was 18 months. The results were as follows: Average time of significant improvement in pain was 9 days. Eighty-eight percent (119 cases) was improved in pain and range of motion after injecllion treatments; 82%(14/17) with TPI, 85%(33/39) with SSB, and 92%(72/78) with both. Early improvement of paih within 1 week was 72% in the treatment-responsive group, in which TPI group has 100% response(14/14) and sse has 94% response(31/33)