• Journal of Broadcast Engineering
• /
• v.15 no.4
• /
• pp.487-497
• /
• 2010

In this paper, we propose a hard handover scheme which adaptively decides important handover parameters such as hysteresis and time-to-trigger values considering the load difference between the target and serving cells. First of all, the hysteresis value can be automatically adjusted according to the load difference, thus it is used to decide the handover trigger time. As a result, through the adaptive hysteresis scheme, handover drop rate is improved. However, this adaptive hysteresis scheme has a problem that the ping-pong effect, which occurs due to the frequent movement of mobile stations at the cell boundary, is increased. Therefore, to solve this problem, we propose a novel adaptive time-to-trigger scheme with the time-to-trigger which is in inverse proportion to the hysteresis value already established by the adaptive hysteresis scheme which adapts to the changing load difference between the target and serving cells. The simulation results show that the proposed adaptive time-to-trigger scheme based on the adaptive hysteresis is better than existing schemes in terms of handover drop rate and ping-pong generation.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.1333-1335
• /
• 2000

In order to turn on the SCR gate, trigger signal source have to provide appropriate gate current and voltage under the gate rating based on the characteristic of SCR, the nature of load and power. It will be essential design factors such as trigger source impedance, trigger signal occurring, signal time width and turn off conditions. Also minimum gate trigger current is changed with the deterioration of SCR. SCR, which is needed large gate trigger current absolutely, is very important for SCR characteristic test because it causes unstable output in the misfile or makes a trouble to pulse trigger circuits. This paper shows scheme to test the performance of SCR with the precision analyzing mechanism and the changing trend of minimum gate current under the trigger conditions.

• Journal of Sensor Science and Technology
• /
• v.24 no.6
• /
• pp.398-403
• /
• 2015

In this paper, the sine-wave and trigger pulse generator with capability of frequency high-resolution and time-variable trigger edge has implemented. It fulfills well the requirements for SS-OCT with frequency resolution of 1 Hz, frequency stability of ${\leq}{\pm}0.03Hz$ and time-variable trigger edge. Through its performance test applied to the wavelength swept laser, 90 nm, sweeping range and 10mW average optical power were obtained. This showes that the realized generator can replace the commercial high cost and high performance signal generators employed by current SS-OCT systems.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.49 no.7
• /
• pp.359-364
• /
• 2000

This paper is introducing a newly developed spark-gap switch with dual trigger system, into which the current from the voltage source is injected along with the test sequence during the synthetic testing of high voltage circuit-breaker. The currently-used spark gap switch is narrow in operating range due to the use of the method of triggering energy being injected by single way. As a result, the frequent happening of misoperation has greatly reduced the test quality and test efficiency and has required the cost of maintenance excessively. In this study, accordingly, in order to basically remove these problems, another triggering system is installed to the opposite direction on the existing triggering system; attaching the same time and the same rising time of pulse wave as on the existing system, so that at a comparatively trigger gap distance from the main electrode(the gap can be operated at 60% of self-break voltage, while at 80% in the current system), the main electrode has been enabled to be closed by the development of spark gap switch with dual trigger system.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.9
• /
• pp.159-164
• /
• 2010

We experiment to analyze on current limiting and recovery characteristics of trigger type SFCL as the composition of the contact. Generally, some superconductor of SFCL is relatively largely loaded due to limit the fault current by oneself and recovery time is affected until the fault cleared. However, in the fault, the proposal trigger type SFCL transfer the fault current to current limiting reactor(CLR) using power switch so it could reduce the recovery time and load of the superconductor. However, because of applying the additional power switches, that could generate some power loss. Therefore, to solve this problem, we proposed the composition method of the double contact for a trigger type SFCL and analyzed on current limiting and recovery characteristics for ones.

• Journal of Korean Physical Therapy Science
• /
• v.3 no.4
• /
• pp.181-187
• /
• 1996

The purpose of this study is to help understand the pressure pain threshold's comparison following time progress after IMS to the trigger point and recognize this methode' effect for treating these kind of myofascial pain syndrome in clinic. Resently, myofascial pain syndrome is a disease that keeps the highest rate of patients visiting the Department of Rehabilitation Medicine. and so one should understand the change of IMS'effect following time progress for patients to be dealt rightly in clinic. In addition, the theory and treatment of myofascial pain syndrome needs to be understood or to be dealt rightly for therapists to treat and to approach to the right moment in right mode for the patients with myofascial pain syndrome. Therefore, one should know where to stimulate and why one stimulate trigger point and what effect one obtain after IMS.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.75-78
• /
• 2007

Mobile IP provides hand-held devices with mobility which allows the user to do work over the network. However, handover time due transfer between access routers causes network delays and data loss. L2Trigger Handover expects this handover to take place, and executes L3 handover before L2 handover takes place, thereby reducing overall handover latency, although it still is an issue since handover latency between AR is not completely eliminated in L2 trigger handover. In this paper took into consideration where MIH is used in MIPv4 and using MIH Table when handover is about to occur in MN(Mobile Node), thereby pre-fetching data needed by Handover. In this way, when the handover is estimated, it improves the init time that L2trigger had. Furthermore we can find that we can execute the handover with shorten init time in smaller and narrow overlap length

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.43 no.7
• /
• pp.1050-1060
• /
• 1994

This paper is a study on the computer simulation of the characteristics of the superconducting fault current limiter. Input variable parameters are apparent power, load resistance value, line resistance value and so on. Initial fault current 2 times larger than the trigger current is required to reduce the switching time of SFCL. The propagation velocity increases abruptly, the transport current is several times larger than the ciritical current. In this paper, the switching time is calculated to be 323$\mu$ sec, and the initial fault current is 19 times larger than the critical current. Because the trigger coils are bifilar winding, they have little impedance in superconducting state. After fault occurred, the limiting coil acts as a superconducting reactor and the trigger coils quench at a critical current. Without the SFCL in the circuit, fault current after the load impedence is shorted might be increased to 1100A. The fault current is, therefore, successfully limited by the superconducting limiting coil to 100A determined by the coil inductance.

• ETRI Journal
• /
• v.35 no.5
• /
• pp.797-807
• /
• 2013

In this paper, an input receiver with a hysteresis characteristic that can work at voltage levels between 0.9 V and 5 V is proposed. The input receiver can be used as a wide voltage range Schmitt trigger also. At the same time, reliable circuit operation is ensured. According to the research findings, this is the first time a wide voltage range Schmitt trigger is being reported. The proposed circuit is compared with previously reported input receivers, and it is shown that the circuit has better noise immunity. The proposed input receiver ends the need for a separate Schmitt trigger and input buffer. The frequency of operation is also higher than that of the previously reported receiver. The circuit is simulated using HSPICE at 0.35-${\mu}m$ standard thin oxide technology. Monte Carlo analysis is conducted at different process conditions, showing that the proposed circuit works well for different process conditions at different voltage levels of operation. A noise impulse of ($V_{CC}/2$) magnitude is added to the input voltage to show that the receiver receives the correct logic level even in the presence of noise. Here, $V_{CC}$ is the fixed voltage supply of 3.3 V.

• Clinics in Shoulder and Elbow
• /
• v.1 no.2
• /
• pp.193-197
• /
• 1998

Frozen shoulder is known as a self-limited disease. But, its long duration and pain nature can make the patients debilitative. And most patients cannot tolerate a chronically painful extremity and are concerned about the possibility of developing permanent dysfunction. In painful phase of frozen shoulder, some aggressive mordalties as like trigger point injection or suprascapular nerve block can beneficial to: reduce discomfort and pain. In order to document clinical results, we evaluated the results of 134 frozen shoulders treated with trigger point injection and/or suprascapular nerve block at Kyungpook National University Hospital, from January 1995 to April 1997. The treatment group was divided into 3 modalities: 17 cases in trigger point injection(TPI), 39 cases in suprascapular nerve block(SSB), and 78 cases in both methods. The supportive treatment including oral medication, heat and stretching exercise was also applied. The average age at the time of diagnosis was 57 years old and average follow-up time was 18 months. The results were as follows: Average time of significant improvement in pain was 9 days. Eighty-eight percent (119 cases) was improved in pain and range of motion after injecllion treatments; 82%(14/17) with TPI, 85%(33/39) with SSB, and 92%(72/78) with both. Early improvement of paih within 1 week was 72% in the treatment-responsive group, in which TPI group has 100% response(14/14) and sse has 94% response(31/33)