• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 C
• /
• pp.1236-1238
• /
• 1999

This paper presents an effect of cross magnetization to the generator simplified linear model which is used for multi-machine power systems. The formulae of reactances and time constant with saturation effect are presented. The simulation results show that cross magnetization has an effect which can not be ignored, to the reactances, time constant and eigenvalues in one machine infinite bus system of simplified linear model.

• 대한수학회지
• /
• 제51권4호
• /
• pp.735-749
• /
• 2014

This paper studies the asymptotic behavior of the finite-time ruin probability in a jump-diffusion risk model with constant force of interest, upper tail asymptotically independent claims and a general counting arrival process. Particularly, if the claim inter-arrival times follow a certain dependence structure, the obtained result also covers the case of the infinite-time ruin probability.

• Journal of Information Processing Systems
• /
• 제14권5호
• /
• pp.1068-1074
• /
• 2018

In this paper, we consider the delay partial differential equation of three dimensions with constant coefficients. We established the alternating direction difference scheme by the standard finite difference method, gave the order of convergence of the format and the expression of the difference scheme truncation errors.

• 한국안전학회지
• /
• 제9권4호
• /
• pp.42-48
• /
• 1994

A rotor flux error-based approach for correcting the rotor time constant estimation used in the slip frequency calculator of indirect field oriented controller is presented in this paper. The controller was derived from the d-q induction machine model. Slip frequency gain is dependent on the machine parameter errors. And parameter errors result in rotor flux error. Thus, estimated rotor flux is compared to commanded rotor flux. The error between them is used for the estimation of rotor time constant. Simulation results which demonstrate the performance of this approach are presented.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2013년도 전력전자학술대회 논문집
• /
• pp.269-270
• /
• 2013

This paper proposes the estimation algorithm to find the rotor time constant of induction motors, which is very important for induction motor drive system. This strategy is based on flux estimator theory. Proposed method has been demonstrated through simulation using MATLAB SIMULINK.

• 대한전기학회논문지:전력기술부문A
• /
• 제52권10호
• /
• pp.563-570
• /
• 2003

When a fault occurs on railway feeders it is very important to detect the fault to protect trains and facilities. Because a DC railway system has low feeder voltage, The fault current can be smaller than the current of load starting. So it is important to discriminate between the small fault current and the load starting current. The load starting current increases step by step but the fault current increases at one time. So the type of $\Delta$I/ relay(50F) was developed using the different characteristics between the load starting current and the fault current. The load starting current increases step by step so the time constant of each step is much smaller than that of the fault current. First, to detect faults in DC railway systems, an algorithm using the time constant calculated by the method of least squares is presented in this paper. If a fault occurs on DC railway systems it is necessary to find a fault location to repair the faulted system as soon as possible. The second aim of the paper is to calculate the accurate fault location using Kirchhoff's voltage law.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.285-287
• /
• 2001

To obtain a high performance in a vector controlled induction machine, it is essential to know the instantaneous position of the rotor flux which depends on the rotor time constant. But the rotor time constant mainly varies due to the temperature rise in the motor winding, so real time compensating algorithm is necessary. This paper proposes that it uses short duration pulses added to the constant flux command current and then resultant torque command current produced by speed controller is utilized for the rotor resistance estimation. This method has advantages with a low computational requirement and does not require voltage sensors. The proposed method is proved by simulations.

• 한국전기전자재료학회논문지
• /
• 제30권4호
• /
• pp.218-222
• /
• 2017

In this paper, in order to develop excellent composition ceramics for a piezoelectric energy- harvesting device, we synthesized $0.99(Na_{0.52}\;K_{0.443}\;Li_{0.037})(Nb_{0.883}\;Sb_{0.08}\;Ta_{0.037})O_3$ + $0.01(Sr_{0.95}Ca_{0.05})TiO_3$ + $0.3\;wt%\;Bi_2O_3\;+\;0.3\;wt%\;Fe_2O_3\;+\;0.3\;wt%\;CuO$ (abbreviated as NKN-SCT) ceramics with different sintering times, using the ordinary solid-state reaction method. The effect of sintering time on the microstructure and piezoelectric properties was investigated. The ceramics with the sintering time of 7 h have the optimum values of the piezoelectric constant ($d_{33}$), piezoelectric voltage constant ($g_{33}$), planar piezoelectric coupling coefficient (kp), mechanical quality factor (Qm), and dielectric constant (${\varepsilon}r$): $d_{33}=314[pC/N]$, $g_{33}=20.07[10^{-3}mV/N]$, kp = 0.442, Qm = 93, ${\varepsilon}r=1,768$, all being suitable for a piezoelectric energy-harvesting device.

• 한국지반환경공학회 논문집
• /
• 제13권12호
• /
• pp.17-25
• /
• 2012

본 논문에서는 TDR 장비를 사용하여 지반특성에 따라 변화하는 유전상수를 측정하였으며, 지반의 함수비 및 밀도와의 상관성을 분석하였다. 또한, 유전상수를 이용한 지중 공동탐사기법의 적용성을 평가하기 위하여 공동의 크기에 따른 유전상수의 변화 정도를 측정하였다. 실험결과 지반의 유전상수는 함수비와 밀도가 증가함에 따라 선형적인 증가 경향을 나타내는 것으로 평가 되었으며, 일정한 관계식으로 표현할 수 있었다. 또한, 지반의 유전상수는 공동의 크기에 따라 일정한 경향을 나타내며 변화하는 것으로 평가되었다. TDR 기법을 사용하여 측정된 유전상수값은 지반의 함수비, 밀도와 일정한 상관관계를 나타내고 있음을 확인하였으며, 지중 공동탐사에 관한 기초자료로서 활용할 수 있을 것으로 판단된다.

• 한국경영과학회지
• /
• 제19권1호
• /
• pp.145-152
• /
• 1994

This paper deals with an economic design of acelerated life test under constant stresses where failure times are exponentially distributed. In this case the optimization criterion is the information amount per unit cost. Fisher's information matrix of exponential distribution's parameters and expected cost considering fixed and variable costs are obtained. The decision variable is the censoring time in the model. In the 2-level constant stress case, it is proved that the optimal solution exists and is unique under some condition. Numerical examples are also included.