• 전기의세계
• /
• v.24 no.6
• /
• pp.24-27
• /
• 1975

Thyristor motor 또는 Commutatorless motor는 특수한 전동기의 명칭이 아니라 분배기를 사용한 자제식인버어터에 의해 제어되는 동기전동기 system의 총칭이고 특히 이와 같은 system에 적합한 동기전동기의 연구는 Alexanderson, Stohr의 무정류전동기의 이론적 고찰에서부터 시작하였다. Thyristor motor는 최근의 다이리스터의 발달에 따라 이 소자의 Switching 회로를 다상화하여 직류전동기의 정류자, 브러시를 다이리스터에 의한 스위칭작용으로 치환시키고, 직류정도기와 거의 등가되는 특성을 얻도록 연구되었고 Thyristor motor의 탄생을 Motors have graduated from the laboratory into commercial applications라고 발표하였다. 여기서 다이리스터를 사용한 가변주파수에 의한 동기전동기의 속도제어 system으로서의 구체적인 2-3의 회로예로서 이 새로운 전동기를 해설하고자 한다.

• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.230-233
• /
• 1999

The design and implementation of thyristor water cooling control systems in considered in this pape Coolant water is pumped through the thyristor heat sinks where heat is transferred from the thyristo to the water. This water is then pumped through outdoor air-to-water heat exchangers where heat I transferred to the outside air. Since the water must be pure, it is filtered and de-ionized. Also the water temperature must be below dew-point temperature. Redundant pumps, outdoor heat exchangers, power supply system, controller monitoring system are provided for system reliability and availability.

• Proceedings of the KWS Conference
• /
• 2005.06a
• /
• pp.352-354
• /
• 2005

This paper shows the development of Digital Thyristor CMA Welding machine system. This system using 8 bit microprocessor. The system has the digital welding process and also constant voltage using fuzzy controller.

• Proceedings of the KIEE Conference
• /
• 2005.04a
• /
• pp.155-156
• /
• 2005

본 논문은 반도체 스위치인 Thyristor와 Magnetic Switch(MS)를 이용한 고전압 펄스발생기의 개발에 대하여 기술하고 있다.

• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.818-820
• /
• 1993

In the three phase full-wave thyristor rectifier, heat radiation concentrated at a few thyristor(s), while equipment's output is normal. That is very important on the predictive maintenance or checking including replacement of parts(or modules). Therefore, this report explains the method of effective diagnosis and the reason that firing control modules have to be adjusted accuratly on each phase.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.54 no.1
• /
• pp.30-34
• /
• 2005

This study shows the lasing characteristics of InGaAs/InGaAsP multiple-quantum-well waveguide-type depleted optical thyristor (DOT) using the vertical window. The measured switching voltage and current are 3.36 V and 10 ㎂, respectively. The lasing threshold current is 131 mA at 25 ℃. The output peak wavelength is 1570 nm at a bias current of 1.22 Ith and there is not input signal anymore in the output port. The vertical injection depleted optical thyristor - laser diode (VIDOT-LD) using the vertical-injection structure shows very good isolation between input and output signal.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.2
• /
• pp.674-682
• /
• 2017

This paper presents an optimal initial firing angle control based on the energy consumption and regenerative energy of a parallel multi-pulse thyristor dual converter for urban railway power substations. To prevent short circuiting the thyristor dual converter, a hysteresis band for maintaining a zero-current discontinuous section (ZCDS) is essential during mode changes. During conversion from the ZCDS to forward or reverse mode, the DC trolley voltage can be stabilized by selecting the optimal initial firing angle without an overshoot and slow response. However, the optimal initial firing angle is different depending on the line impedance of each converter. Therefore, the control algorithm for tracking the optimal initial firing angle is proposed to eliminate the overshoot and slow response of DC trolley voltage. Simulations and experiments show that the proposed algorithm yields the fastest DC voltage control performance in the transient state by tracking the optimal firing angle.

• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.516-517
• /
• 2011

마이크로그리드는 분산전원 또는 계통의 Sag/Swell 및 단락사고, 지락사고 등으로 인한 정전 발생 시에 사고 지점을 제외한 독립운전이 가능해야 한다. 따라서 사고 발생지점을 신속하게 분리할 수 있는 기술이 필요하다. 이러한 배경으로 본 연구에서는 신속하게 사고지점을 차단하는 고속차단 시스템(TCB :Thyristor Circuit Breaker)을 제안한다. 도통손실이 작고 경제적인 Thyristor를 이용하여 25 [kVA]급 TCB 시스템을 제작하고 사고를 모의하여 사고 발생 시의 TCB 시스템 동작특성에 대해 연구한다.

• 한국정보통신설비학회:학술대회논문집
• /
• 2004.08a
• /
• pp.41-45
• /
• 2004

본 논문에서는 DLL(Delay Locked Loop)를 응용하여 광통신 시스템에 응용할 수 있는 완전공핍 광 싸이리스터(Depleted Optical Thyristor)의 구동 Driver를 설계하였다. 광스위칭 소자로 활용될 DOT를 구동시키기 위해서는 Thyristor의 구조 특성을 고려할 때 강한 역방향 전압 펄스와 함께 높은 순방향 전류 펄스의 특성을 가지는 파형이 필요하다. 구동 Driver의 제작 공정은 삼성 CMOS $0.35{\mu}m$, 1 poly, 4 metal 공정을 사용하였고 시뮬레이션 결과 500 MHz 대역에서 DOT를 구동하기 위한 전압, 전류 특성을 가지는 파형을 얻을 수 있었다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.7
• /
• pp.423-426
• /
• 2017

The designing approaches with consideration offabrication process technologies for high-frequency, high-powered, silicon-based static induction thyristors (SITH) are presented. The effects of doping concentration and thickness on the I-V characteristics and power performance of the devices are discussed. The dependence of SITH switching performances on material, geometric structure, and technological parameters isexamined by using two-dimensional simulations. Thick-epitaxy technology is found to be one of the most critical steps in realizing the proposed structure and switching times, $t_{off}$, of SITH, which may be reduced to below ${\sim}0.26{\mu}s$ for the proposed 1,700 V SITH devicesafter optimization.