• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.1
• /
• pp.185-194
• /
• 2012

Deepwater oil is becoming more attractive because most onshore and shallow water oil is developing or developed. With the on-going trend to deepwater oil developments, flow assurance problems which prevent oil flow from reservoir to processing facilities are becoming an issue because deposited material can be occurred in case oil is exposed to very different environment from reservoir. Wax deposition which is one of flow assurance problems can be a major technical and economic issue because it is very sensitive to temperature. In order to predict and mitigate wax problems, the precise measurement of wax appearance temperature (WAT) which is the starting temperature of wax precipitation is very important. Various methods have been suggested for WAT measurement of opaque oil because there is no standard method for opaque oil. In this study, the WAT of opaque oil samples was measured using viscosity measurement method, differential scanning calorimetry, filter plugging method, and pressurized filter plugging method. Wax deposition test and high temperature gas chromatography analysis were applied to verify measured WAT. As a result of study, the WAT of opaque oils was successfully measured and verified. If WAT measurement methods of opaque oil related to oil characteristics is systematized using the results of this study, it can be a valuable tool for WAT measurement of opaque oil and flow assurance related to wax deposition.

• Wind and Structures
• /
• v.31 no.2
• /
• pp.143-152
• /
• 2020

The wind design of buildings is typically based on strength provisions under ultimate loads. This is unlike the ductility-based approach used in seismic design, which allows inelastic actions to take place in the structure under extreme seismic events. This research investigates the application of a similar concept in wind engineering. In seismic design, the elastic forces resulting from an extreme event of high return period are reduced by a load reduction factor chosen by the designer and accordingly a certain ductility capacity needs to be achieved by the structure. Two reasons have triggered the investigation of this ductility-based concept under wind loads. Firstly, there is a trend in the design codes to increase the return period used in wind design approaching the large return period used in seismic design. Secondly, the structure always possesses a certain level of ductility that the wind design does not benefit from. Many technical issues arise when applying a ductility-based approach under wind loads. The use of reduced design loads will lead to the design of a more flexible structure with larger natural periods. While this might be beneficial for seismic response, it is not necessarily the case for the wind response, where increasing the flexibility is expected to increase the fluctuating response. This particular issue is examined by considering a case study of a sixty-five-story high-rise building previously tested at the Boundary Layer Wind Tunnel Laboratory at the University of Western Ontario using a pressure model. A three-dimensional finite element model is developed for the building. The wind pressures from the tested rigid model are applied to the finite element model and a time history dynamic analysis is conducted. The time history variation of the straining actions on various structure elements of the building are evaluated and decomposed into mean, background and fluctuating components. A reduction factor is applied to the fluctuating components and a modified time history response of the straining actions is calculated. The building components are redesigned under this set of reduced straining actions and its fundamental period is then evaluated. A new set of loads is calculated based on the modified period and is compared to the set of loads associated with the original structure. This is followed by non-linear static pushover analysis conducted individually on each shear wall module after redesigning these walls. The ductility demand of shear walls with reduced cross sections is assessed to justify the application of the load reduction factor "R".

• Korean Journal of Agricultural Science
• /
• v.47 no.1
• /
• pp.139-161
• /
• 2020

The aims of this study were to classify the cultivation status of medicinal crop farmers and to obtain basic data on domestic medicinal crops. To this end, 406 medicinal crop farmers participating in farming education programs in 14 cities and counties were surveyed over 10 months. The results were as follows. First, the biggest difficulty farmers faced in the overall production of medicinal crops was a lack of cultivation skills. Second, in a detailed inquiry about each difficulty item, the most difficult problems were injury by continuous cropping of root-using crops, shortage of specific farm machinery, uncertain market prices, and lack of knowledge about pest control or the positive list system (PLS). Third, the profitability of medicinal crops increased with career experience. Among the farmers who earned profits, requests for education and technical guidance were the most important factors for profitability. Fourth, the results of the analysis suggest that to achieve stable cultivation of medicinal crops, the following items need to be addressed: development and supply of basic cultivation technologies, climate response, registration of pest control pesticides, a solution to the injury by continuous cropping, and contracting cultivation expansion. Additionally, to improve profitability, it is necessary to create conditions that enable the same crops to grow for a long time in one region.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.2
• /
• pp.590-595
• /
• 2016

The US is pursuing a plan to raise the subsidies for electric vehicles by more than 30%. The number of electric vehicles in Europe is expected to be one million by 2020 and 2030 and there are plans to expand in the center of Germany to supply six million electric vehicles on the dissemination and development policies. The development of the electric vehicle is not simply a technical trend but there is the potential to improve the access to this technology and the possibility of changing the entire social system and long-term energy security. Domestic competition is also increasing the supply of electric vehicles, as new blue ocean markets are emerging. The current domestic On-board Charger (Home Charger) plans to be suspended from the 2015 government-sponsored installation, This paper on the IEC 61851-1 and IEC 61851-22 specifications analyzes the development of a midnight electricity charger as a low-cost algorithm, the decrease in price and the improved convenience of the On-board Charger for Bluetooth module with the ATmega128 existing charger system, and the UI configuration via the LCD Panel to a Smartphone app are proposed.

• Journal of Environmental Impact Assessment
• /
• v.24 no.5
• /
• pp.432-443
• /
• 2015

Ski industry is sensitive to climate change. Many studies were carried out to learn the impact on climate change to large scale ski resorts around the world and the results are difficult to be applied to small scale ski resorts in general. So, this study targeted small ski resorts composing the ski industry of Korea and forecasted the impact of climate change. As a result, based on the mitigation efforts to minimize climate changes of the future (RCP 4.5), ski industry could be maintained at the same level of today. However, if climate change continues at the current trend (RCP 8.5), ski resorts will face loss of business days. If 100 days are considered as the minimum days to maintain the ski business, among 17 ski resorts in Korea, 3 ski resorts will be driven out of business by 2030s, 12 more ski resorts by 2060s and remaining 2 ski resort by 2090s will end the business. It means that smaller ski resorts has higher chance of facing difficulties in running business just as large scale ski resorts. Therefore, to sustain the ski business, technical and managerial efforts to adapt to the changing environment is needed.

• Journal of the Korea Safety Management & Science
• /
• v.22 no.3
• /
• pp.23-29
• /
• 2020

As the duty to report and investigate major elevator failures has expanded due to the total amendment of the Elevator Safety Management Act in 2018, more important information on major elevator failures that have been partially identified has been collected. As of 2019, the number of elevators in Korea exceeded 700,000, making it the eighth-class elevator powerhouse in the world, but there is a trend of increasing casualties due to accidents and breakdowns. An Seung-gang-gi is a term that encompasses an elevator that moves vertically and an escalator that moves horizontally. It is an important means of transportation for most citizens that are encountered almost every day in daily life, and it is also necessary as a means of transportation that enables the construction of skyscrapers. And it seems that its importance will never diminish in the future. Major elevator failures are the main cause of dispatch when accumulating the number of 119 dispatches, and the frequency of occurrence is high. It's a shame. According to Heinrich's Law, 300 minor signs and danger phenomena precede, 29 minor accidents and 1 major accident. Accidents caused by elevators are increasing every year due to the increase in the number of installations, and the damage is threatening the valuable lives and property of users and workers in related fields due to fatal risks such as death and serious injury. Elevator safety management can achieve its purpose only when it is managed with the usual interests, awareness of safety, and full efforts of the users, workers, and the government concerned. This study was analyzed based on 2019 data notified to the Korea Elevator Safety Agency on major breakdowns improved after the revision of the Elevator Safety Management Act in 2018, and a total of 8,256 data were analyzed using the SPSS 21 version, a statistical analysis tool, to analyze the correlation with technical statistics. Proceeded. Through the analysis, it was possible to obtain preventive safety management data to prevent serious elevator safety accidents from occurring, and to derive meaningful implications that related safety management and maintenance can be effectively operated to prevent serious failures. In addition, through this analysis, we expect the development of related industries and legal and institutional improvement.

• Food Science of Animal Resources
• /
• v.26 no.2
• /
• pp.175-182
• /
• 2006

Diets consist of two different pork samples: pork of a Jeju native pig ( 260 days old, $101{\sim}103kg$ ) not fed tangerine byproduct during finishing period ($T_0$), and pork fed 8% and 15% tangerine byproduct during growing and finishing period ($T_1$), respectively. The effects of the diet on the physiological activities of rats were studied by feeding 17-week old rats with the two diets for 4 weeks. There was no significant difference between $T_0$ and $T_1$ in the rat's feed intake, feed efficiency ratio, and weight gain. Furthermore, there was no significant difference between $T_0$ and $T_1$ in the rat's weight of liver, kidney, spleen, epididymal fat pad, triglyceride and cholesterol of liver. Both $T_0$ and $T_1$ showed similar trends in terms of total lipid, phospholipid, triglyceride, total cholesterol, atherogenic index, protein, glucose, hemoglobin level, mineral level, and ${\gamma}$-GTP, ALT, AST and ALP activities. However, $T_1$ showed the trend of increasing amount of the serum's HDL and LDL cholesterol level, compared with $T_0$.

• Korean Journal of Ecology and Environment
• /
• v.39 no.2 s.116
• /
• pp.257-264
• /
• 2006

In order to evaluate the application of Algae Online Analyzer (AOA), an instrument of automatic measurement of chlorophyll a concentration, was tested and compared with the acetone extraction method on the basis of microscopic counting of phytoplankton in field water (Paltang Reservoir). We simultaneously conducted AOA operation and extraction method with the same water sample, to compare both results of chlorophyll a measurement. Phytoplankton were enumerated by inverted microscope with the Sedgwick-Rafter chamber, and classified into the genus or species. According to the AOA measurement, the diatom most (83.6%) strongly contributed to the total chlorophyll a concentration, followed by chlorophyceae> cyanophyceae>cryptophyceae. Overall, the results of both AOA and extraction method showed a similar trend and significant correlation (r=0.87, n=302, p<0.001), however, there were some differences according to the season and species. In particular, the relationship between AOA Chl-a density of the diatom (r=0.73, p=0.010) and cyrptophyceae (.=0.83, p=0.00154) were siginificant, while chlorophyceae (r= -0.13) and cyanophyceae (r= -0.16) showed no clear relationship during the study period. Although we can not fully understand why there was difference between both mothods, AOA application for alarming algal bloom and water quality management during the algal bloom appears to be very relevant. However, the further study or technical upgrade of AOA measurement is required, especially in the case of low density of phytoplankton or species-specific measurement.

• Korean Journal of Construction Engineering and Management
• /
• v.14 no.4
• /
• pp.108-117
• /
• 2013

The domestic CM business market has continued to grow, but its size is relatively small yet in comparison with the total size of the domestic construction industry. Evaluation of CM projects was conducted through questionnaire surveys. Both clients and CM firms showed positive satisfaction levels. Nevertheless, the clients' satisfaction levels were relatively low in safety management, cost management, and document and information management. Superior areas of CM tasks were time management and recovery scheduling, quality control and technical instruction, and design value engineering. On the other hand, inferior areas of CM tasks were claim analysis and dispute resolution, cost estimation, and life cycle costing. Both entities have agreed with the positive effects of CM involvement in terms of cost saving, time reduction, quality improvement, and safety incidents prevention to at least 0~5% extent.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.2
• /
• pp.71-85
• /
• 2016

The purpose of this research is to study technical and policy improvements of carrier billing services, which are a developing and growing industry, by adopting a meta-analysis method. Implications were derived from studying 15 years-worth of academic research papers (from 2001 to 2015), by analyzing the trends over a total of 109 such research papers on carrier billing services. First, looking at the characteristics of the main studies of the papers from 2008 to 2009, it papers appeared that dealt with preventing fraudulent transactions and preserving consumer protection. Privacy, policy proposals and studies for new systems were researched from 2010-2012. Service, success factors, damage prevention systems research, law, and institutions were discussed in 2013-2015 mainly. Second, the research showed that the number of carrier billing service studies increased due to social issues(telecommunications billing services deregulation, the emergence smartphones, fraud). Third, in sectorial research results, technology was the focus area of 47 papers (43.1%), the service sector was the focus of 39 pieces (35.8%) and law and policy improvement accounted for 23 pieces (21.1%). The study of technology and service areas was the most active and according to changes in the environment, law and policy improvement were second to most active. This study will contribute to improving relevant institutions and research directions about study trends in carrier billing services.