• Mass Spectrometry Letters
• /
• v.6 no.3
• /
• pp.59-64
• /
• 2015

Quadrupole ion trap mass analyzer with a simplified geometry, namely, the cylindrical ion trap (CIT), has been shown to be well-suited using in miniature mass spectrometry and even in mass spectrometer arrays. Computation of stability regions is of particular importance in designing and assembling an ion trap. However, solving CIT equations are rather more difficult and complex than QIT equations, so, analytical and matrix methods have been widely used to calculate the stability regions. In this article we present the results of numerical simulations of the physical properties and the fractional mass resolutions m/Δm of the confined ions in the first stability region was analyzed by the fifth order Runge-Kutta method (RKM5) at the optimum radius size for both ion traps. Because of similarity the both results, having determining the optimum radius, we can make much easier to design CIT. Also, the simulated results has been performed a high precision in the resolution of trapped ions at the optimum radius size.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.49 no.8
• /
• pp.463-467
• /
• 2000

In this paper, the new LIGBT structures with trap injection are proposed to improve switching characteristics of the conventional SOI LIGBT. The Simulations are performed in order to investigate the effects of the positiion, whidth and concentration of trap injection region with a reduced minority carrier lifetime using 2D device simulator MEDICI. Their electrical characteristics are analyzed and the optimum design parameters are extracted. As a result of simulation, the turn off time for the model A with the trap injection is $0.78\mus$. These results indicate the improvement of about 2 times compared with the conventional SOI LIGBT because trap injection prevents minority carriers which is stored in the n-drift region during turn off switching. The latching current is $1.5\times10^{-4}A/\mum$ and forward blocking voltage is 168V which are superior to those of conventional structure. It is shown that the trap injection is very effective to reduce the turn off time with a little increasing of on-state voltage drop if its design and process parameters are optimized.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.15 no.2
• /
• pp.31-37
• /
• 2016

In the steam system, a stream trap valve discharges a condensate and a non-condensable gas. It also prevents stream from being leaked. The free float stream trap valve is a mechanical type of stream trap. The valve is opened when a hallow ball is floated due to the density of the condensate through the condensate flows into the valve. On the other hand, when the flow of the condensate is completed, the valve is closed as the float subsides due to the weight of the structure and the stream is blocked. In addition, the bimetal lifts the hallow ball, which discharges the non-condensable gas. In this study, the performance of the properties of the free float stream trap valve, the method of support for three points, and the orifice design are researched. Moreover, the condensate discharge capacity of the free float stream trap valve is calculated from the experiment.

• Journal of the Semiconductor & Display Technology
• /
• v.18 no.4
• /
• pp.134-137
• /
• 2019

In this paper, the data retention characteristics were analyzed to find out the thickness effect on the trap energy distribution of silicon nitride in the silicon-oxide-nitride-oxide-silicon (SONOS) flash memory devices. The nitride films were prepared by low pressure chemical vapor deposition (LPCVD). The flat band voltage shift in the programmed device was measured at the elevated temperatures to observe the thermal excitation of electrons from the nitride traps in the retention mode. The trap energy distribution was extracted using the charge decay rates and the experimental results show that the portion of the shallow interface trap in the total nitride trap amount including interface and bulk trap increases as the nitride thickness decreases.

• Tribology and Lubricants
• /
• v.36 no.6
• /
• pp.359-364
• /
• 2020

Numerical investigation of the groove trap effect with variation in the groove-edge radius of curvature is presented here. The trap effect is evaluated in a two-dimensional sliding bearing using computational fluid dynamics (CFD). This simulation is based on the discrete phase model (DPM) and standard k - ε turbulence model using commercial CFD software, FLUENT. The numerical results are evaluated by comparisons with streamlines and particle trajectories in the grooves. Grooves are applied to various lubrication systems to improve their lubrication characteristics, such as load carrying capacity increment, leakage reduction, frictional loss reduction, and preventing three-body abrasive wear due to trapping effect. This study investigates the grove trapping effect for various groove-edge radius of curvature values and Reynolds numbers. The particle is assumed to be made of steel, with a circular shape, and is injected as a single particle in various positions. One-way coupling is used in the DPM model because the single particle injection condition is applied. Further, the "reflect" condition is applied to the wall boundary and "escape" condition is used for the "pressure inlet" and "pressure outlet" boundaries. From the numerical results, the groove edge radius is found to influence the groove trap effect. Moreover, the groove trap effect is more effective when applying the groove edge radius.

• Korean journal of applied entomology
• /
• v.57 no.3
• /
• pp.177-183
• /
• 2018

This study examined the seasonal, regional distribution of mosquito vectors related with disease vectors in the Jeju. From March to November, sample were collected from 11 points in four environmentally different sites in Jeju Island. Samples were collected twice a month using a black-light trap and a BG sentinel trap. Overall, five genera and seven species types of 6,042 female mosquitos were collected. Among the collected mosquitos, 4,159 (68.8%) and 1,348 (24.4%) were Culex pipiens and Aedes albopictus, respectively, making them the dominant species. Additionally, collection using the black light trap produced 72.8 entities per trap in Jungang-dong service center in the center of the city, which was the highest value, while the lowest amount of 1.4 per trap was recovered from the airport. When the BG sentinel trap was used, the largest recovery was observed in the port, where there were 71.7 entities per trap, while the lowest amount of 28.3 entities per trap was recovered at Gealmae Eco Park. The overall number of mosquitoes collected started to increase from May, and reached the largest value of 1,156 (19.1%) in August. Trapped mosquitoes are created 364 pools of up to 50 grains per pool, by season, by environmental, and by species. When the pools were used, no flaviviral infection was observed upon real time RT-PCR.

• Korean Journal of Organic Agriculture
• /
• v.19 no.1
• /
• pp.93-107
• /
• 2011

This research was carried out to investigate invertebrate fauna with organic and conventional pear orchards, which used four collected methods; soil sampling for soil microorganism, pitfall, malaise, and black light trap for over ground species. Collected species were 37 species, 1,184 individuals in organic and 28 species, 501 individuals by soil sampling in conventional pear fields. Those were 38 species, 646 individuals and 29 species, 440 individuals by pitfall trap, 55 species 650 individuals and 47 species, 508 individuals by malaise trap, and 23 species, 201 individuals and 9 species, 42 individuals by black light trap. Collembola was collected 389 individuals in organic which was 5 times than in conventional in soil sampling. In pitfall trap, that was 183 individuals which was 3 times. The diversity indices of organic pear orchards were 1.956 in May, 2.638 in August and those of conventional was 1.426 in May, 2.011 in August in soil sampling. In pitfall trap, the dominant species were spiders, collembollan, and coleopteran. Among Coleoptera, indicator insects for the evaluation of agricultural environment suggested were Eusilpha jakowelewi as organic pear orchard and Anisodactykus punctatipennis and Pheropsophus jessoensis as conventional. Malaise trap was collected dominant species as Diptera and Hymenoptera of Braconidae and Ichneumonidae. The diversity indices of organic pear orchards were 2.952, 3.120, and 2.010 in pitfall, malaise and black light trap in over ground invertebrate sampling. The highest diversity was in malaise trap. The higher diversity indices, the lower dominance indices.

• Journal of Veterinary Clinics
• /
• v.22 no.3
• /
• pp.190-193
• /
• 2005

The concentration of tartrate resistant acid phosphatase (TRAP) in synovial fluid of normal stifle joint was investigated in order to establish a baseline data to distinguish between healthy joint and joint with injury of cranial cruciate ligament (CCL). Twenty three mixed-breed healthy dogs free from joint diseases (fourteen adult and nine young) were used in this study. The dogs were sedated and synovial fluid was collected from the femoropatellar compartment of stifle joints by direct arthrocentesis. The concentration of TRAP in synovial fluid was determined using the method of Lang. The concentration of TRAP were $0.083{\pm}0.039$ IU/ml in adult dogs, $0.064{\pm}0.023$ IU/ml in young dogs, $0.075{\pm}0.028$ IU/ml in large dogs (>22 kg), $0.076{\pm}0.046$ IU/ml in small dogs (<22 kg), $0.085{\pm}0.036$ IU/ml in neutered dogs and $0.056{\pm}0.022$ IU/ml in intact dogs. The concentration of TRAP in the neutered dogs was significantly (p<0.05) higher than the intact dogs. This data can be used baseline data for a comparison with joint with injury of cranial cruciate ligament.

• 전기의세계
• /
• v.29 no.8
• /
• pp.511-518
• /
• 1980

The thermostimulated discharge currents of low-density polyethylene electrets were measured versus the principal experimental variables. Several electrode types were used for the charging and discharging procedures. The results led to know the experimental conditions for the heterocharge and homocharge accumulating and decreasing. The electronic structure parameters of polyethylene such as trap level, density of traps, hopping length, mobility, trap time constants were deduced. A method for evaluating the local electric field inside the electret is proposed.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.645-647
• /
• 2008

In this paper, we analyzed interface trap density between pentacene and PVP and SiO2 gate dielectric by using high-low C-V characteristics. The interface trap density was $10^{13}\;cm^{-2}eV^{-1}$.