• 한국군사과학기술학회지
• /
• 제4권2호
• /
• pp.122-129
• /
• 2001

A characterization procedure for analyzing symmetric coupled MIS(Metal-Insulator-Semiconductor) transmission line is used the same procedure as a general single layer symmetric coupled line with perfect dielectric substrate from the extraction of the characteristic impedance and propagation constant for even- and odd-mode. In this paper, an analysis for a new substrate shielding symmetric coupled MIS structure consisting of grounded crossbar at the interface between Si and SiO2 layer using the Finite- Difference Time-Domain(FDTD) method is presented. In order to reduce the substrate effects on the transmission line characteristics, a shielding structure consisting of grounded crossbar lines over time-domain signal has been examined. Symmetric coupled MIS transmission line parameters for even- and odd-mode are investigated as the functions of frequency, and the extracted distributed frequency- dependent transmission line parameters and corresponding equivalent circuit parameters as well as quality factor for the new MIS crossbar embedded structure are also presented. It is shown that the quality factor of the symmetric coupled transmission line can be improved without significant change in the characteristic impedance and effective dielectric constant.

• Structural Engineering and Mechanics
• /
• 제18권2호
• /
• pp.247-262
• /
• 2004

In the earlier application of the spline finite strip method(FSM), the uniform B3-spline functions were used in the longitudinal direction while the conventional interpolation functions were used in the transverse direction to construct the displacement filed in a strip. To overcome the shortcoming of the uniform B3-spline, non-periodic B-spline was developed as the displacement function. The use of non-periodic B3-spline function requires no tangential vectors at both ends to interpolate the geometry of shell and the Kronecker delta property is also satisfied at the end boundaries. Recently, non-periodic spline FSM which was modified to have a multiple knots at the boundary was developed for the shell analysis and applied to the analysis of bridges. In the formulation of a non-symmetric spline finite strip method, the concepts of non-periodic B3-spline and a stress-resultant finite strip with drilling degrees of freedom for a shell are used. The introduction of non-symmetrically spaced knots in the longitudinal direction allows the selective local refinement to improve the accuracy of solution at the connections or at the location of concentrated load. A number of numerical tests were performed to prove the accuracy and efficiency of the present study.

• Steel and Composite Structures
• /
• 제39권5호
• /
• pp.599-614
• /
• 2021

This study deals with the Lateral-Torsional Buckling (LTB) of a mono-symmetric tapered I-beam, in which the cross-section is varying longitudinally. To obtain the buckling moment, two concentrated bending moments should be applied at the two ends of the structure. This structure is made of Functionally Graded Material (FGM). The Young's and shear modules change linearly along the longitudinal direction of the beam. It is considered that this tapered beam is laterally restrained continuously, by using torsional springs. Furthermore, two rotational bending springs are employed at the two structural ends. To achieve the buckling moment, Ritz solution method is utilized. The response of critical buckling moment of the beam is obtained by minimizing the total potential energy relation. The lateral and torsional displacement fields of the beam are interpolated by harmonic functions. These functions satisfy the boundary conditions. Two different support conditions are considered in this study. The obtained formulation is validated by solving benchmark problems. Moreover, some numerical studies are implemented to show the accuracy, efficiency and high performance of the proposed formulation.

• 전자공학회논문지
• /
• 제54권6호
• /
• pp.30-39
• /
• 2017

본 논문은 디지털영역에서의 평균화 기법을 이용한 cyclic ADC의 디지털 보정기법을 제안한다. 제안하는 보정기법은 1.5비트 MDAC의 커패시터 부정합으로 인해 발생하는 ADC의 비선형성을 보정한다. 부정합을 지니는 커패시터로 이루어진 1.5비트 MDAC은 이상적인 1.5비트 MDAC의 레지듀 플롯(residue plot)에 대해 대칭적인 레지듀 플롯을 지닌다. 커패시터 부정합을 지니는 1.5비트 MDAC의 고유한 레지듀 플롯은 대칭적인 아날로그-디지털 전달함수로 반영된다. 이상적인 아날로그-디지털 전달함수에 대해 대칭적인 두 아날로그-디지털 전달함수를 평균화함으로써, 비선형성이 보정된 아날로그-디지털 전달함수를 얻을 수 있다. 해당 아날로그-디지털 전달함수 평균화의 구현을 위해, 본 논문의 12비트 cyclic ADC는 1.5비트 MDAC의 동작 모드를 2개로 정의한다. 해당 cyclic ADC는 MDAC을 첫 번째 동작모드로 동작시킴으로써, 비선형성을 지니는 12.5비트 출력 코드를 획득한다. 샘플링 된 동일한 입력 아날로그 전압에 대해, MDAC을 두 번째 동작모드로 동작시킴으로써, cyclic ADC는 비선형성을 지니는 또 다른 12.5비트 출력 코드를 획득한다. 각 MDAC의 동작모드에 의해 발생하는 아날로그-디지털 전달함수는 이상적인 아날로그-디지털 전달함수에 대해 대칭적이기 때문에, 앞서 획득한 두 개의 비선형성을 지니는 12.5비트를 평균화함으로써, 비선형성이 보정된 최종 12비트 출력 코드를 획득할 수 있다. 제안하는 디지털 보정기법과 12비트 cyclic ADC는 $0.18-{\mu}m$ CMOS 공정을 이용하여 full-custom 형식으로 구현되었다. 측정된 SNDR(ENOB)와 SFDR은 각각 65.3dB(10.6비트 ENOB)와 71.7dB이다. 측정된 INL과 DNL은 각각 -0.30/+0.33LSB와 -0.63/+0.56LSB이다.

• Journal of applied mathematics & informatics
• /
• 제36권1_2호
• /
• pp.29-38
• /
• 2018

In this paper, we introduce a degenerate q-poly-Bernoulli numbers and polynomials include q-logarithm function. We derive some relations with this polynomials and the Stirling numbers of second kind and investigate some symmetric identities using special functions that are involving this polynomials.

• 호남수학학술지
• /
• 제42권2호
• /
• pp.359-376
• /
• 2020

The present research investigates the bounds of an integral operator for convex functions and a differentiable function f such that |f'| is convex. Further, these bounds of integral operators specifically produce estimations of various classical fractional and recently defined conformable integral operators. These results also contain bounds of Hadamard type for symmetric convex functions.

• 대한수학회논문집
• /
• 제37권4호
• /
• pp.1041-1053
• /
• 2022

In this paper, sharp lower and upper bounds on the third order Hermitian-Toeplitz determinant for the classes of Sakaguchi functions and some of its subclasses related to right-half of lemniscate of Bernoulli, reverse lemniscate of Bernoulli and exponential functions are investigated.

• 대한수학회논문집
• /
• 제38권4호
• /
• pp.1175-1189
• /
• 2023

The main purpose of this paper is to give some new identities and properties related to Bernoulli type numbers and polynomials associated with the Bessel function of the first kind. We give symmetric properties of the Bernoulli type numbers and polynomials. Moreover, using generating functions and the Faà di Bruno's formula, we derive some new formulas and relations related to not only these polynomials, but also the Bernoulli numbers and polynomials and the Euler numbers and polynomials.

• 호남수학학술지
• /
• 제29권2호
• /
• pp.119-192
• /
• 2007

A very important Hopf algebra is the graded Hopf algebra Symm of symmetric functions. It can be characterized as the unique graded positive selfdual Hopf algebra with orthonormal graded distinguished basis and just one primitive element from the distinguished basis. This result is due to Andrei Zelevinsky. A noncommutative graded Hopf algebra of this type cannot exist. But there is a most important positive graded Hopf algebra with distinguished basis that is noncommutative and that is twisted selfdual, the Malvenuto-Poirier-Reutenauer Hopf algebra of permutations. Thus the question arises whether there is a corresponding uniqueness theorem for MPR. This prepreprint records initial investigations in this direction and proves that uniquenees holds up to and including the degree 4 which has rank 24.

• Structural Engineering and Mechanics
• /
• 제58권6호
• /
• pp.1001-1020
• /
• 2016

The study is to investigate the free vibration of antisymmetric angle-ply conical shells having non-uniform sinusoidal thickness variation. The arbitrarily varying thickness is considered in the axial direction of the shell. The vibrational behavior of shear deformable conical shells is analyzed for three different support conditions. The coupled differential equations in terms displacement and rotational functions are obtained. These displacement and rotational functions are invariantly approximated using cubic spline. A generalized eigenvalue problem is obtained and solved numerically for an eigenfrequency parameter and an associated eigenvector of spline coefficients. The vibration characteristic of the shells is examined for cone angle, aspect ratio, sinusoidal thickness variation, layer number, stacking sequence, and boundary conditions.