• 한국세라믹학회지
• /
• 제37권6호
• /
• pp.583-588
• /
• 2000

Antioxidation characteristics of carbon at high temperature with the co-addition of Al and Si powder in Al2O3-C system refractory were analyzed. The use of surface-modified phosphate carbon as a starting material was found to be very effective in improving the mixing effect of raw materials and antioxidation behavior of carbon. In particular, this effect was dominant at higher temperatures than 130$0^{\circ}C$.

• Carbon letters
• /
• 제11권3호
• /
• pp.216-223
• /
• 2010

Two-types of ionically modified multi-walled carbon nanotube (MWNTs) based sensors were developed by radiationinduced graft polymerization using vinyl monomers such as 3-(butyl imidazol)-2-(hydroxyl)propyl methyl methacrylate and 1-[(4-ethenylphenyl)methyl]-3-buthyl-imidazolium chloride with ionic properties, in aqueous solution at room temperature. Subsequently, the tyrosinase-immobilized biosensor was fabricated by a hand-casting of the ionic property-modified MWNTs, tyrosinase, and chitosan solution as a binder onto ITO glass surface. The sensing ranges of the tyrosinase-biosensor for phenol in phosphate buffer solution was in the range of 0.005~0.2 mM. The total phenolic compounds mainly such as caffeine of the tyrosinase-immobilized biosensor for commercial coffee were also determined.

• 대한환경공학회지
• /
• 제37권11호
• /
• pp.642-648
• /
• 2015

수계에 존재하는 인산염의 흡착제거 용량을 향상시키기 위하여, 참나무 기반 활성탄을 제조하였으며, 이때 $Fe^{3+}$와 $Al^{3+}$이온의 혼합물을 흡착제 표면에 담지 하였다. 금속담지 활성탄의 인산염의 흡착용량은 금속이온으로 표면을 개질 하지 않은 활성탄에 비해 약 8배 높게 나타났다. 흡착평형량은 흡착반응의 온도가 증가할수록 증가하였으며, Langmuir 흡착등온식의 경향과 일치하였다. 제조된 금속담지 활성탄의 인산염 흡착제거공정은 흡열의 자발반응으로 진행되었음을 확인하였다. 흡착공정의 거동과 제거속도를 평가하기 위하여, 세공확산모델을 통해 내부 확산계수를 산출하였으며, 이는 실험결과와 매우 일치하였다.

• Bulletin of the Korean Chemical Society
• /
• 제28권7호
• /
• pp.1171-1174
• /
• 2007

We have developed an electrochemical immunosensor that combines the electrocatalytic property of carbon nanotube and the low background current of indium tin oxide (ITO) electrode. A partial monolayer of carboxylated single-walled carbon nanotube (CCNT) is covalently formed on an ITO electrode modified with amine-terminated phosphonic acid. Nonspecifically adsorbed avidin on the hydrophobic sidewalls of CCNT is used to immobilize biotinylated antibody and to reduce the nonspecific binding to CCNT. The biotinylated antimouse IgG bound on avidin and the antimouse IgG conjugated with alkaline phosphatase (ALP) sandwiches a target mouse IgG. ALP catalyzes the conversion of p-aminophenyl phosphate monohydrate into p-aminophenol, which is electrocatalytically oxidized to p-quinone imine on CCNT surface. Moderate electrocatalytic electrode obtained with the combination of CCNT and ITO allows low detection limit (0.1 ng/ mL).

• Journal of Electrochemical Science and Technology
• /
• 제8권1호
• /
• pp.43-52
• /
• 2017

In this paper, for the first time, the electroanalytical study of Triethylenediamine, TEDA was done on a typically graphene modified carbon paste electrode (Gr/CPE) in pH=10.5 of phosphate buffer solutions (PBS). The surface morphology of the bare and modified electrodes was characterized by scanning electron microscopy (SEM), electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). The electro-oxidation of TEDA was investigated at the surface of modified electrode. The results revealed that the oxidation peak current of TEDA at the surface of Gr/CPE is 2.70 times than that shown at bare-CPE. A linear calibration plot was observed in the range of 1.0 to 202.0 ppm. In this way, the detection limit was found to be 0.18 ppm. The method was then successfully applied to determination of TEDA in aqueous samples obtained from two kinds of activated carbon from the masks of war. On the other hand, density functional theory (DFT) method at B3LYP/6-311++G** level of theory and a conductor-like Polarizable Continuum Model (CPCM) was used to calculate the $pK_a$ values of TEDA. The energies of lowest unoccupied molecular orbital ($E_{LUMO}$) and highest occupied molecular orbital ($E_{HOMO}$), gap energy (${\Delta}E$) and some thermodynamic parameters such as Gibbs free energy of TEDA and its conjugate acid ($HT^+$) were calculated. The results of calculated $pK_a$ were found to be in good agreement with the experimental values.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.1082-1083
• /
• 2006

Carbon nanotube (CNT) reinforced hydroxyapatite (HAp) composites were fabricated by using the spark plasma sintering process with surfactant modified CNT and HAp nano powder. Without the dependency on sintering temperature, the main crystal phase existed with the HAp phase although a few contents of ${\beta}-TCP$ (Tri calcium phosphate) phase were detected. The maximum fracture toughness, $(1.27\;MPa.m^{1/2})$ was obtained in the sample sintered at $1100^{\circ}C$ and on the fracture surface a typical intergranular fracture mode, as well as the pull-out pmhenomenon of CNT, was observed.

• Journal of Electrochemical Science and Technology
• /
• 제13권3호
• /
• pp.354-361
• /
• 2022

In a direct methanol fuel cell system (DMFC), one of the drawbacks is methanol crossover. Methanol from the anode passes through the membrane and enters the cathode, causing mixed potential in the cell. Only Pt-based catalysts are capable of operating as cathode for oxygen reduction reaction (ORR) in a harsh acidic condition of DMFC. However, it causes mixed potential due to high activity toward methanol oxidation reaction of Pt. To overcome this situation, developing Pt-based catalyst that has methanol tolerance is significant, by controlling reactant adsorption or reaction kinetics. Pt/C decorated with phosphate ion was prepared by modified polyol method as cathode catalyst in DMFC. Phosphate ions, bonded to the carbon of Pt/C, surround free Pt surface and block only methanol adsorption on Pt, not oxygen. It leads to the suppression of methanol oxidation in an oxygen atmosphere, resulting in high DMFC performance compared to pristine Pt/C.

• Journal of Electrochemical Science and Technology
• /
• 제9권1호
• /
• pp.28-36
• /
• 2018

Metal-organic frameworks have recently been considered very promising modifiers in electrochemical analysis due to their unique characteristics among which tunable pore sizes, crystalline ordered structures, large surface areas and chemical tenability are worth noting. In the present research, $Cu(btec)_{0.5}DMF$ was electrodeposited on the surface of glassy carbon electrode at room temperature under cathodic potential and was initially used as the active materials for the detection of $H_2O_2$. The cyclic voltammogram of $Cu(btec)_{0.5}DMF$ modified GC electrode shows distinct redox peaks potentials at +0.002 and +0.212 V in 0.1 M phosphate buffer solution (pH 6.5) corresponding to $Cu^{(II)}/Cu^{(I)}$ in $Cu(btec)_{0.5}DMF$. Acting as the electrode materials of a non-enzymatic $H_2O_2$ biosensor, the $Cu(btec)_{0.5}DMF$ brings about a promising electrocatalytic performance. The high electrocatalytic activity of the $Cu(btec)_{0.5}DMF$ modified GC electrode is demonstrated by the amperometric response towards $H_2O_2$ reduction with a wide linear range from $5{\mu}M$ to $8000{\mu}M$, a low detection limit of $0.865{\mu}M$, good stability and high selectivity at an applied potential of -0.2 V, which was higher than some $H_2O_2$ biosensors.

• 전기화학회지
• /
• 제4권3호
• /
• pp.109-112
• /
• 2001

활성화된 탄소반죽전극 표면을 N피드록시숙신이미드(NHS)층으로 수식한 후, 이 전극을 이용하여 square-wave voltammetry방법으로 과량의 아스코빅산 존재 하에서 도파민을 측정하였다. 수식된 전극의 특성은 도파민과 아스코빅산 혼합용액에서 순한전압전류법을 이용하여 조사하였다. 도파민과 아스코빅산의 산화 피크의 분리는 시료용액의 pH에 큰 영향을 받았으며, pH 4.0에서 최대의 피크분리(172mv)를 보였다. 따라서 도파민을 정량하기 위한 square-wave voltammeoy는 140 mM NaCl을 포함하는 100 mM phosphate buffered saline (PBS)의 pH 4.0 조건에서 수행하였다. NHS로 수식된 전극은 0.2mM 아스코빅 산의 존재 하에서 도파민의 농도 $5.0\times10^{-2}$까지 검출한계와 감응기울기 $6.1{\mu}A/{\mu}M$의 감도를 나타내었다. 반면 수식되지 않은 전극은 $1.0{\mu}M$의 검출한계와 $0.93{\mu}A/{\mu}M$ 기울기를 나타내어 표면에 수식된 N-히드록시숙신이미드가 도파민의 감응을 촉진함을 보여주었다.

• 폴리머
• /
• 제35권3호
• /
• pp.216-222
• /
• 2011

4급 아민에 의한 이온성 및 3급 아민에 의한 비공유전자쌍의 이중 특성을 갖은 다중벽 탄소나노튜브 지지체를 글리시딜 메티크릴레이트의 방사선 그래프트법을 수행한 후, 아민화 반응을 수행하여 제조하였다. 제조된 이중 다중벽 틴소나노튜브 지지체와 나피온 용액을 혼합 후, 이 코팅용액을 GC 전극 표면에 코팅시킨 후, 여기에 미생물인 Alkaligenes spp.를 고정화하여 미생물 바이오센서를 제작하였다. 이 미생물 센서의 페놀에 대한 검출범위는 0.005~7.0 mM이었다. 이 미생물 바이이오센서를 이용하여 상용의 적포도주에서 페놀함량을 측정하였다.