• The Journal of Dong Guk Oriental Medicine
• /
• v.5
• /
• pp.53-77
• /
• 1996

The purpose of this study is to observe the effect of Sayeuksan on serum reaction in $CCl^4$ treated rats. In this study the experimental rats divided four group (Control group, $CCl^4$ group, sayeuksan group, and shiho, kamcho group) Under the same condition control group were administered water, sample group were administered Sayeuksan for 8days. and then, both $CCl_4$ group and sample group were injeccted to abdomen with $CCl_4$ for 1days. The change of GOT GPT ${\gamma}$-GTP ALP LDH activity in blood serum. The obtained results are summarised as follows : 1. In the change of GOT GPT contents, as compared with control group sample group was significantly decreased. 2. In the change of ${\gamma}$-GTP contents as compared with control group, sample group was significantly decreased. 3. In the change of ALP contents, as compared with control group, sample group was significantly decreased. 4. In the change of LDH contents, as compared with contol group, sample group was significantly decreased.

• Journal of the Korean Physical Society
• /
• v.73 no.11
• /
• pp.1679-1683
• /
• 2018

Polycrystalline $BaSrCo_2(Fe_{1-x}Al_x)_{12}O_{22}$ (x = 0.00, 0.01, 0.05, and 0.10) samples were synthesized by polymerizable complex method. Based on the Rietveld refinement, crystal structures of the samples were found to be single-phased and determined to be rhombohedral with space group of R-3m. The hysteresis curves of the samples were measured under 15 kOe at various temperatures ranging from 4.2 and 295 K. It shows that they were not saturated with increasing Al ion contents due to the reduction of magnetic anisotropy. $M_{15kOe}$ was decreased with increasing Al ions contents. We expect that non-magnetic Al ions preferentially occupy the up-spin site of $18h_{VI}$, $3b_{VI}$, and $3a_{VI}$. The $M{\ddot{o}}ssbauer$ spectra of the samples were obtained at 295 K, and analyzed with sixsextets for Fe sites corresponding to the Y-type hexaferrite crystallography sites. The <$E_Q$> shows abrupt changes, and the <$H_{hf}$> shows abrupt decreases around x = 0.05 due to the coexistence of magnetic secondary phases.

• Clean Technology
• /
• v.29 no.4
• /
• pp.279-287
• /
• 2023

Fine dust emitted from coal combustion is classified into filterable particulate matter (FPM) and condensable particulate matter (CPM). CPM is difficult to control with existing air pollution control devices, so research is being conducted to understand the characteristics of CPM. Components constituting condensable particulate matter (CPM) are divided into inorganic and organic components. There are many quantitative analysis results for the ionic components, which account for a significant proportion of the CPM inorganic components, but little is known about the organic components. Thus, there is a need for a quantitative analysis of CPM organic components. In this study, aromatic hydrocarbons (toluene, ethyl benzene, m,p-xylene, and o-xylene) and n-alkanes with 10 to 30 carbon atoms were quantitatively analyzed to understand the organic components of CPM emitted from a lab-scale coal combustor. Of the aromatic hydrocarbons, toluene accounted for 1.03% of the CPM organic components. On the other hand, the contents of ethyl benzene, m,p-xylene, and o-xylene showed low values of 0.11%, 0.18%, and 0.51% on average, respectively. Among the n-alkanes, triacontane (C₃₀) showed a high content of 2.64% and decane (C₁₀) showed a content of 2.05%. The next highest contents were shown with dodecane (C₁₂), tetradecane (C₁₄), and heptacosane (C₂₇), all of which were higher than that of toluene. The n-alkane substances that had detectable concentrations showed higher contents than ethyl benzene, m,p-xylene, and o-xylene except for tetracosane (C₂₄).

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.4
• /
• pp.1420-1426
• /
• 2019

This study was done to investigate the protective effects of ethanol extract Artemisiae vulgaris L(Av) on carbon tetrachloride(CCl₄)intoxicated rats. Male sprague Dawley rats(200~210g)was used. experimental groups were divided into normal group, CCl₄-control group, and ethanol extract CCl₄-treated group. CCl₄-treated groups were injected with CCl₄ 0.6mg/kg.b.w(i.p). The activities of Alanine aminotransferase(ALT), Aspartate aminotransferase(AST), Alkaline phosphatase(ALP), Glutamyl transpeptidase(γ-GT), Lactate dehydrogenase(LDH) in extract pretrated group was significantly decreased(p<0.05) compared to the CCl₄-control group. The contents of triglyceride, cholesterol and lipid peroxide were significantly decreased(p<0.05). whereas the contents of HDL-cholesterol and glutathione(GSH) were significantly increased(p<0.05). These results suggest that extract of Artemisiae vulgaris L(Av) has hepatoprotective effect in the CCl₄-intoxicated rats.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.11
• /
• pp.1174-1177
• /
• 2004

The dielectric and piezoelectric properties of silver added 0.96 Pb(Z $r_{0.52}$ $Ti_{0.48}$) $O_3$-0.04 Pb(Mn,W,Sb,Nb)$_3$ ceramics were examined. By varying the contents of silver(0.0, 0.4, 1.0 mol%), the effect of silver addition on PZT-PMWSN ceramics was investigated at various sintering temperature(900, 1000, 1100 $^{\circ}C$). As increasing silver contents, the relative dielectric constant was increased and sinterability was enhanced. At the specimen with 0.4 mol% Ag and sintered at 1000 $^{\circ}C$, electromechanical coupling factor( $k_{p}$), mechanical quality factor( $Q_{m}$), dielectric constant($\varepsilon$$_{r}$) and dielectric loss were 0.502, 811, 991, 0.006, respectively. The results showed that the PZT-PMWSN/Ag composites have enhanced piezoelectic and dielectric properties and sintering temperature was lowered.red.

• The Korea Journal of Herbology
• /
• v.31 no.3
• /
• pp.71-75
• /
• 2016

Objectives : Mori Ramulus is a young branch of Morus alba Linne, which has been used as traditional medicines for antidiarrhea, antibacteria, and antihypertension in Korea. With the basis on these medicinal activities, it is registered at the Korean Herbal Pharmacopoeia. The standard for quality control in use, however, is not yet validated.Methods : We experiment on heavy metals test, TLC, loss on drying, ash, acid-insoluble ash, contents of ethanolsoluble extracts and contents of oxyresveratrol by using the 15 samples of Mori Ramulus which are collected domestically. We tested items according to the General Test, processes and apparatus, Crude Drugs Test of KP(2011).Results : Purity test(Heavy metals) showed contents for Pb, As, Hg, and Cd range of 0.1~1.1 ppm, 0.0~0.2 ppm, 0.00~0.01 ppm, and 0.00~0.02 ppm. Identification test(Thin layer chromatography) was on comparing with morucine standard solution in R_f value, all samples showed morucine spot (dark blue, R_f : 0.3) as same as R_f value of morucine-standard solution. Loss on drying was ranged from 5.1 to 8.9 %, ash and acid-insoluble ash were between the range 3.0~6.3% and 0.3~0.8%. Contents of ethanol-soluble extracts was ranged from 6.2 to 12.0%. Content of oxyresveratrol was ranged from 0.01 to 0.16 % based on the oxyresveratrol standard curve.Conclusions : We sincerely hope that this study will be contributed to the standardization and quality control of Korean herbal medicines.

• International Journal of Contents
• /
• v.2 no.3
• /
• pp.18-21
• /
• 2006

Nowadays, many people enjoy playing games in computer. In this kind of game, people often meet NPC (Non Player Character). It is the virtual character in simplified form of real player and exits in most of current computer games. Various NPCs add the reality and atmosphere of the game as well as help players. There are several techniques to embody NPC, but developers generally use AI technique. This paper discusses some artificial intelligence techniques used in game contents. Especially this paper focuses on the AI techniques used in computer games in terms of the two main approaches, symbolic approach and sub-symbolic approach.

• Korean Journal of Materials Research
• /
• v.15 no.12
• /
• pp.756-759
• /
• 2005

A lead free piezoelectric material, bismuth sodium barium titanate $(Bi_{0.5}Na_{0.5})_{0.94}Ba_{0.06}TiO_3$ (BNBT), was considered as an environment-friendly alternatives for the current PZT system. A perovskite BNBT was synthesized by conventional bulk ceramic processing technique. In order to improve piezoelectric properties, $La_2O_3$ as a dopant was incorporated into the BNBT system up to 0.025 moi, ana the effects on subsequent the piezoelectric ana dielectric properties were systematically investigated. With increasing $La_2O_3$ contents, the equilibrium grain shape was remarkably evidenced and sintered density was increased. Piezoelectric and dielectric properties were s]town to have maximum values at the $La_2O_3$ contents of 0.02 mol. $La^{3+}$ ions seemed to act as a softener in the BNBT system and to enhance dielectric and piezoelectric properties in this study.

• Korean Journal of Materials Research
• /
• v.31 no.9
• /
• pp.532-538
• /
• 2021

In this study, a spray dryer is used to make granules of Y₂O₃ and YF₃, and then Y₅O₄F₇ is synthesized following heat treatment of them under Ar gas atmosphere at 600 ℃. Single and binary monomer mixtures are compared and analyzed to optimize photocurable monomer system for DLP 3D printing. The mixture of HEA and TMPTA at 8:2 ratio exhibits the highest photocuring properties and low viscosity with shear thinning behavior. The optimized photocurable monomer and synthesized Y₅O₄F₇ are therefore mixed and applied to printing process at variable solid contents (60, 70, 80, & 85 wt.%) and light exposure times. Under optimal light exposure conditions (initial exposure time: 1.2 s, basic exposure time: 5 s), YOF composites at 60, 70 & 80 wt.% solid contents are successfully printed. As a result of measuring the size of the printed samples compared to the dimensions of the designed bar type specimen, the deviation is found to increase as the YOF solid content increases. This shows that it is necessary to maximize the photocuring activity of the monomer system and to optimize the exposure time when printing using a high-solids ceramic slurry.

• Journal of Magnetics
• /
• v.8 no.4
• /
• pp.138-141
• /
• 2003

$Ni_{0.65}Zn_{0.35}Fe_2O_4$thin films were prepared by using a sol-gel method. Their crystallographic, dielectric and magnetic properties were investigated as a function of Cu contents by means of an X-ray diffractometer (XRD), X-ray reflectivity, LCZ meter (NF2232), a vibrating sample magnetometer (VSM), and an atomic force microscope (AFM). From typical C-V measurements for $Ni_{0.65}Zn_{0.35}Fe_2O_4$ thin films on p-type silicon substrate, the surface charge density was calculated as 1.4 ${\mu}$C/$m^2$. The dielectric constant evaluated from the capacitance at the accumulation state was 28. The high $H_{c}$ and low $M_{sat}$ at x=0.0 and 0.1 were due to the growth of the ${\alpha}$-$Fe_2O_3$ phase having antiferromagnetic properties. The rapidly decreased $H_{c}$ and increased $M_{sat}$ at x=0.2 and 0.3 can be explained that the ${\alpha}$-$Fe_2O_3$ phases have completely disappeared at x=0.3 and so, non-magnetic defects are minimized. The $M_{sat}$ was slightly decreased and the $H_{c}$ was increased above at x=0.3 because the increase of grain boundary due to smaller grain size acts as defects during magnetization process.