• Geophysics and Geophysical Exploration
• /
• v.9 no.1
• /
• pp.50-59
• /
• 2006

The risk of fault reactivation in the Gippsland Basin was calculated using the FAST (Fault Analysis Seal Technology) technique, which determines fault reactivation risk by estimating the increase in pore pressure required to cause reactivation within the present-day stress field. The stress regime in the Gippsland Basin is on the boundary between strike-slip and reverse faulting: maximum horizontal stress $({\sim}\;40.5\;Mpa/km)$ > vertical stress (21 Mpa/km) ${\sim}$ minimum horizontal stress (20 MPa/km). Pore pressure is hydrostatic above the Campanian Volcanics of the Golden Beach Subgroup. The NW-SE maximum horizontal stress orientation $(139^{\circ}N)$ determined herein is broadly consistent with previous estimates, and verifies a NW-SE maximum horizontal stress orientation in the Gippsland Basin. Fault reactivation risk in the Gippsland Basin was calculated using two fault strength scenarios; cohesionless faults $(C=0;{\mu}=0.65)$ and healed faults $(C=5.4;\;{\mu}=0.78)$. The orientations of faults with relatively high and relatively low reactivation potential are almost identical for healed and cohesionless fault strength scenarios. High-angle faults striking NE-SW are unlikely to reactivate in the current stress regime. High-angle faults oriented SSE-NNW and ENE-WSW have the highest fault reactivation risk. Additionally, low-angle faults (thrust faults) striking NE-SW have a relatively high risk of reactivation. The highest reactivation risk for optimally oriented faults corresponds to an estimated pore pressure increase (Delta-P) of 3.8 MPa $({\sim}548\;psi)$ for cohesionless faults and 15.6 MPa $({\sim}2262\;psi)$ for healed faults. The absolute values of pore pressure increase obtained from fault reactivation analysis presented in this paper are subject to large errors because of uncertainties in the geomechanical model (in situ stress and rock strength data). In particular, the maximum horizontal stress magnitude and fault strength data are poorly constrained. Therefore, fault reactivation analysis cannot be used to directly measure the maximum allowable pore pressure increase within a reservoir. We argue that fault reactivation analysis of this type can only be used for assessing the relative risk of fault reactivation and not to determine the maximum allowable pore pressure increase a fault can withstand prior to reactivation.

• Geophysics and Geophysical Exploration
• /
• v.19 no.1
• /
• pp.1-10
• /
• 2016

The hypocenter distribution of microseismic events generated by hydraulic fracturing for shale gas development provides essential information for understanding characteristics of fracture network. In this study, we evaluate how inaccurate velocity models influence the inversion results of two widely used location programs, hypoellipse and hypoDD, which are developed based on an iterative linear inversion. We assume that 98 stations are densely located inside the circle with a radius of 4 km and 5 artificial hypocenter sets (S0 ~ S4) are located from the center of the network to the south with 1 km interval. Each hypocenter set contains 25 events placed on the plane. To quantify accuracies of the inversion results, we defined 6 parameters: difference between average hypocenters of assumed and inverted locations, $d_1$; ratio of assumed and inverted areas estimated by hypocenters, r; difference between dip of the reference plane and the best fitting plane for determined hypocenters, ${\theta}$; difference between strike of the reference plane and the best fitting plane for determined hypocenters, ${\phi}$; root-mean-square distance between hypocenters and the best fitting plane, $d_2$; root-mean-square error in horizontal direction on the best fitting plane, $d_3$. Synthetic travel times are calculated for the reference model having 1D layered structure and the inaccurate velocity model for the inversion is constructed by using normal distribution with standard deviations of 0.1, 0.2, and 0.3 km/s, respectively, with respect to the reference model. The parameters $d_1$, r, ${\theta}$, and $d_2$ show positive correlation with the level of velocity perturbations, but the others are not sensitive to the perturbations except S4, which is located at the outer boundary of the network. In cases of S0, S1, S2, and S3, hypoellipse and hypoDD provide similar results for $d_1$. However, for other parameters, hypoDD shows much better results and errors of locations can be reduced by about several meters regardless of the level of perturbations. In light of the purpose to understand the characteristics of hydraulic fracturing, $1{\sigma}$ error of velocity structure should be under 0.2 km/s in hypoellipse and 0.3 km/s in hypoDD.

• The Journal of the Petrological Society of Korea
• /
• v.6 no.3
• /
• pp.244-244
• /
• 1997

The Janggunbong area(this study area) at the central-south part in the North Sobaegsan Massif, Korea, consists mainly of Precambrian(Wonnam and Yulri Formations)-Paleozoic [Joseon Supergroup(Jangsan Quarzite, Dueumri Formation and Janggum Limestone) and Pyeongan Group(Jaesan and Dongsugok Formations)] metasedimentary rocks and Mesozoic granitoid(Chunyang granite.) This study is to interpret geological structure of the North Sobaegsan Massif in the Jang-gunbong area by analysing rock-structure and microstructure of the constituent rocks. It indicates that its geological structure was formed at least by four phases of deformation after the formation of gneissosity(S0) in the Wonnam Formation and bedding plane(S0) in the Paleozoic metasedimentary rocks. The first phase deformation(D1) formed tight isoclinal fold(F1). Its axial plane(S1) strikes east-west and steeply dips north. Its axis (L1) subhorizontally plunges east-west. The second phase deformation(D2), which was related to ductile shear deformation, formed stretching lineation(L2) and shear foliation(S2). The sense of the shear movement indicates dextral strike-slip shearing(top-to-the east shearing). The third phase deformation(D3) formed open inclined fold(F3). Its axial plane(S3) strikes east-west and moderately or gently dips north. Its axis(L3) subhorizontally plunges east-west. The F3 fold reoriented the original north-dipping S1 foliation and D2 shear sense into south-dipping S1 foliation(top-to-the west shear sense on this foliation) at its a limb. The four phase of deformation(D4) formed asymmetric-type open inclined fold(F4) of NE-vergence with NW striking axial plane(S4) and NW-NNW plunging axis(L4). The F4 fold partly reoriented pre-D4 structural elements with east-west trend into those with north-south trend. Such reorientation is recognized mainly in the Paleozoic metasedimentary rocks.

• The Journal of the Petrological Society of Korea
• /
• v.15 no.2 s.44
• /
• pp.49-59
• /
• 2006

This study clarifies the deformation history of Precambrian metamorphic rocks of Sobaegsan Massif (Wonnam Formation, Pyeonghae granite gneiss, Hada leucogranite gneiss) in Giseong-myeon area, Uljin-gun, Korea. It is based on the geometric and kinematic features and the developing sequence of multi-deformed rock structures. It also reviews the extension of Yecheon Shear Zone and the relative occurrence time of each deformation phase from previous researches. It suggests that the geological structure was formed at least through five phases of deformation after formation of their gneissosity or schistosity. (1) The first phase of deformation took placed under compression of ENE-WSW direction, forming NNW trending regional foliation and very tight isoclinal fold. The general trend of gneissosity or schistosity is inferred to be ENE before the first phase of deformation, being rearranged into NNW by the isoclinal folding. (2) The second phase of deformation formed ENE trending regional foliation and tight, isoclinal, rootless intrafolial folds under compression of NNW-SSE direction [occurrence time: after deposition (Permian age) of Dongsugok Formation, Pyeongan Croup, Janggunbong area]. (3) The third phase of deformation occurred by dextral ductile shearing on the regional foliation, forming stretching lineation of ENE trend and S-C mylonitic structure (after intrusion of Hesozoic homblende granite, Sangunmyeon area-before intrusion of Mesozoic Chunyang granite, Janggunbong area). (4) The fourth phase occurred under (E)NE-(W)SW compression, forming (N)NW trending open fold. (5) The fifth phase took place under N-S compression, forming NNE and NNW trending conjugate strike-slip faults, E-W trending thrust-slip faults, and drag folds related to these fault movements. The deformed structures of fourth and fifth phases result from tectonic movement associated with the developing of the Gyeongsang Basin in Cretaceous age, and it partially rearranged the general ENE trend of the regional foliation in the study area. It also suggests that the Yecheon Shear Zone of E-W trending extends into this area but the ductile shear deformation is weakly developed.

• The Journal of the Petrological Society of Korea
• /
• v.6 no.3
• /
• pp.224-259
• /
• 1997

The Janggunbong area(this study area) at the central-south part in the North Sobaegsan Massif, Korea, consists mainly of Precambrian(Wonnam and Yulri Formations)-Paleozoic [Joseon Supergroupuangsan Quarzite, Dueumri Formation and Janggun Limestone) and Pyeongan Group (Jaesan and Dongsugok Formations)l metasedimentary rocks and Mesozoic granitoid(Chunyang granite). This study is to interpret geological structure of the North Sobaegsan Massif in the Janggunbong area by analysing rock-structure and microstructure of the constituent rocks. It indicates that its geological structure was formed at least by four phases of deformation after the formation of gneissosity(S0) in the Wonnam Formation and bedding plane(S0) in the Paleozoic metasedimentary rocks. The first phase deformation(D1) formed tight isoclinal fold(F1). Its axial plane(S1) strikes east-west and steeply dips north. Its axis(L1) subhorizontally plunges east-west. The second phase deformation(D2), which was related to ductile shear deformation, formed stretching lineation(L2) and shear foliation(S2). The sense of the shear movement indicates dextral strike-slip shearing(topto-the east shearing). The third phase deformation(D3) formed open inclined fold(F3). Its axial plane(S3) strikes east-west and moderately or gently dips north. Its axis(L3) subhorizontally plunges east-west. The F3 fold reoriented the original north-dipping S1 foliation and D2 shear sense into south-dipping S1 foliation(top-to-the west shear sense on this foliation) at its a limb. The four phase of deformation(D4) formed asymmetric-type open inclined fold(F4) of NE-vergence with NW striking axial plane(%) and NW-NNW plunging axis(L4). The F4 fold partly reoriented pre-D4 structural elements with east-west trend into those with north-south trend. Such reorientaion is recognized mainly in the Paleozoic metasedimentary rocks.

• The Journal of the Petrological Society of Korea
• /
• v.20 no.4
• /
• pp.173-189
• /
• 2011

Basic to acidic dykes and systematic joints are observed pervasively in the Jukbyeon-Bugu area, Uljin, east Korea. In order to classify the dykes and joints and to determine the relative chronology, their geometries, kinematics, and cross-cutting relationships, and the petrography and geochemistry of dykes are synthetically analyzed. Based on the orientations and cross-cutting relationships of 144 dykes (137 basic and 7 acidic dykes) and 370 systematic joints, three basic dike swarms (M-10, M-80, and M-100), one acidic dyke group (AD), and four joint sets (J-10, J-40, J-80, and J-150) are classified. Some of the J-150 joints reactivated as dextral strike-slip fault are recognized in the field and named as F-340R. According to petrographic, geochemical, and occurrence features in the field, M-80 and M-100 dykes have originated from a co-magma and intruded under the same stress field, even though they have intruded through different passages, preexisting fractures and new fractures created by magmatic pressure, respectively. And the relative chronology of dyke swarms and joint sets in the study area is determined as follows : ${\rightarrow}$ ${\rightarrow}$ ${\rightarrow}$ ${\rightarrow}$ ${\rightarrow}$ . And the M-80 (M-100) and M-10 dyke swarms intruded under NNE-SSW and NW-SE trending horizontal minimum stress fields, respectively. According to a synthesis of the results of the previous and this studies, the M-80, M-10, and F-340R are interpreted to have been formed about 64-52 Ma, Eocene~Oligocene, and Miocene, respectively.

• Journal of forensic and investigative science
• /
• v.2 no.1
• /
• pp.32-51
• /
• 2007

Serial violent crimes have occurred more frequently. Additional attention is paid to relevant areas in which discussions has also increased. This study analyzed Young-cheol Yoo, serial killer case. Two of Yoo's crimes were studied for modus operandi. The cases selected were the premeditated break-in homicide of upper-class elderly people and the impulsive homicide of the Hwanghak-Dong street vendor. Crime motives, targets, times, places, means and methods were analyzed. Profiling techniques in Young-cheol Yoo cases were evaluated and the problems discovered during investigation were discussed. The followings are the findings of the analysis of the serial killer Yoo cases. Yoo exhibited a hatred toward the rich, the elderly, and women as well as a fear of diseases and death. Yoo's crime targets were the elderly residing in wealthy houses, street vendors and prostitutes. The numbers of victims were: 3 men and 5 women victims in 4 homicide cases involving the elderly residents in wealthy houses; one man in 1 street vendor homicide case 11 women in 11 prostitute homicide cases, so total 20 persons were murdered in 16 cases. The time of the crimes were between 10 am and noon in the homicide cases of the elderly and very late at night or early in the morning in the prostitute homicide cases. Means and methods facilitated include the use of a knife as a threat and a hammer made by Yoo to strike the head and face of victims. In the homicide cases involving the elderly, he attempted to disguise the crime scene as a burglary or committed arson to destroy the evidence; in the prostitute homicide cases, bodies were mutilated and buried in secret. 1) Generally each serial killer case has different characteristics, motives, and purposes; while some serial killer cases involve similar methods, others use different methods. Unlike other crimes, serial killers' characteristics and tastes are very different, so it is difficult to explain serial killings based on a specific model. It is important to accurately capture modus operandi of each serial killing and for detectives to familiarize themselves with them. The process of tracing and use of imagination which follows a serial killer's psychology and thought must be used to find out what kind of thoughts pushed the killer to commit the crime. In order to investigate and research difficult subjects such as serial killing, various methods, skills, and relevant knowledge should be studied, and institutional endeavors should go hand in hand with individual efforts.

• Journal of the Korean earth science society
• /
• v.28 no.2
• /
• pp.187-201
• /
• 2007

The first magnetotelluric (MT) transect across the Korean Peninsula was obtained traversing from the East Sea shoreline to the Yellow Sea shoreline. The MT survey profile was designed perpendicular to the strike of the principal geologic structure of the Korean Peninsula $(N30^{\circ}E)$, so-called 'China direction'. MT data were achieved at 50 sites with spacings of $3{\sim}8km$ along the 240 km survey line. The impedance responses are divided into four subsets reflecting typical geological units: the Kyonggi Massif, the Okchon Belt, the western part of the Kyongsang Basin, and the eastern part of the Kyongsang Basin. In the western part of the Kyongsang Basin, the thickness of the sedimentary layer is estimated to be about 3 km to 8 km and its resistivity is a few hundred ohm-m. A highly conductive layer with a resistivity of 1 to 30 ohm-m was detected beneath the sedimentary layer. The MT data at the Okchon Belt show peculiar responses with phase exceeding $90^{\circ}$. This feature may be explained by an electrically anisotropic structure which is composed of a narrow anisotropic block and an anisotropic layer. The Kyonggi Massif and the eastern part of Kyongsang Basin play a role of window to the deep geoelectrical structure because of the very high resistivity of upper crust. The second layers with highest resistivities in 1-D conductivity models occupy the upper crust with thicknesses of 13 km in the Kyonggi Massif and 18 km in the eastern Kyongsang Basin, respectively.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.13 no.4
• /
• pp.233-244
• /
• 2018

The purpose of this study was to improve awareness of network marketing business in South Korea, which takes a quite negative view of network marketing, to raise awareness of "starting up a business" as independent business owners, to assist them in building their own subjecthood in network business and entrepreneurial identity, and ultimately to give some suggestions on how to improve their self-directed entrepreneurial competency and the quality of their business management. To make an empirical analysis of 121 independent business owners of Korean native network marketing, the personal and background variables of the entrepreneurs were selected as independent variables, and entrepreneurship was selected as a mediator variable. The selected dependent variables were financial and non-financial business performances. A multiple regression analysis was conducted by inputting the variables. The findings of the study were as follows: It produced an effect of more financial performance when the innovation of the independent business owners of network marketing was better, and this innovation was possible to have only when they improved in entrepreneurial efficacy and locus of control. In contrast, only authenticity had an effect on boosting non-financial business performance among the factors of entrepreneurship. To have authenticity, it's necessary to strengthen achievement needs and awareness of locus of control among the personal characteristics of the independent business owners of network marketing. Among the factors of entrepreneurship, there was better authenticity when their personal networks were broader among their background characteristics. In addition, self-efficacy that was one of personal characteristics made a direct contribution to the enhancement of non-financial performance. As a result, independent business owners of network marketing are required to hold a strong belief in their own business, to be active in business activities and to have a high efficacy as spontaneous principal agents, and they also are required to have more adventurous, planned, active and propulsive achievement needs that enable them to attain the goals of their business and keep moving forward. Besides, they should foster their locus-of-control competency that is to control, endure and be responsible for a variety of phenomena or incidents that they face, and there will be better financial performance or non-financial performance only when they demonstrate their self-belief and confidence and when they have faith in and conviction about themselves. For independent business owners of network marketing, a consumer-centered thinking that entails authenticity and trustworthiness and touches the hearts of customers is a more effective marketing strategy than an egocentric thinking as sellers when they approach customers. And they are expected to make progress in terms of the quality of business management when their business attachment or enthusiasm is great enough to match their own efficacy with entrepreneurial identity or strike a balance between them.

• Economic and Environmental Geology
• /
• v.39 no.2 s.177
• /
• pp.129-149
• /
• 2006

Previously published stratigraphic, sedimentologic, paleontologic, paleomagnetic and geophysical data are reviewed to make an understanding on the tectonic evolution of the Cretaceous Gyeongsang (Kyongsang) basin, southeast Korea. A stratigraphic framework and a tectonic model on the formation and deformation of the Gyeongsang Basin are newly proposed on the basis of integration these data with magmatism and mineralization ages in the basin. A newly proposed stratigraphic framework indicates that strata in the basin can be subdivided into five distinct stratigraphic units that represent pre-rifting, syn-rifting, inversion I, II, and III stages. The Gyeongsang Basin was formed initially as a pre-rifting stage due to north-south extension in the Late Jurassic prior to a syn-riftins stage that resulted from east-west extension during the Early Cretaceous. In the Late Cretaceous, the basin was deformed by three-staged sequential deformation of north-south, northwest-southeast, and east-west compressions. The tectonic history of the basin has been largely controlled by the change of motion of the Izanagi Plate from north to northwest during the Cretaceous. In the early Cretaceous, the Izanagi Plate began to subduct northward beneath the Eurasian Plate and caused the left-lateral strike-slip fault systems in the southern part of the peninsula. The left-lateral wrenching of these fault systems was causally linked to development of pull-apart basins, such as the Gyeongsang Basin in the southeastern part of the peninsula. However, northwestward movement of the Izanagi Plate during the Late Cretaceous probably led to the extensive volcanism as well as sequential deformations in the basin. The stratigraphic and tectonic model, which is newly proposed as a result of this study, may be expected to enhancing the efficiency for exploration and exploitation of useful mineral resources in the basin as well as establishing geologic history in the Cretaceous Gyeongsang Basin. Together with the spatial and temporal correlation of the Cretaceous basins in adjacent areas, this stratigraphic and tectonic model provides a new geologic paradigm to delineate the sophisticated tectonic history of East Asia turing the Cretaceous.