• 복식
• /
• 제41권
• /
• pp.185-206
• /
• 1998

The purpose of this study was to improve productivity for maximum effects with the present equipments and staff. This study compared and analyzed the mea-sured time by using stop watch method and MTM, which was the new measuring method. The flow and results of this study were as follows: 1. This study investigated the theoretical background the efficiency for production management, and the way of productivity improvement through documentary research. 2. Setting up the standard flow on the experi-mental company production, making out a process chart and measuring the actual working hour. 3. The study measured the allowance time applying work sampling. 4. Each process of the movement analysis was filmed by video to use basic data. 5. MTM analysis was taken by choosing 10 processes from front bodice according to the basic movement of MTM. Through the results, this study exclude unneccesary movements and suggest a method for working ways. 6. Using the actual working hour measured by a stop watch calculated the pitch time and presumed the amount of daily productivity. 7. The result of the work sampling came out as 38% of allowance rate. It was 13% higher than the standard amount of woman's jacket allowance rate, which was 25%. The most influencing factor was work discussion. That was because there were commuication problem of the work way between the operator and leader. More adequate use of flow table and level passing table was needed. There were the problems that inappropriate places and sizes made the distance of movements longer and often needed more adjustment of works and surroundings. To prevent breakdowns equipments check ups were necessary before works. 8. The results of MTM analysis were as follow : the time was reduced 40% than the actual measured time by a stop watch. This was because the leveling of the operator was included in the real calculation. Also, leveling was included in MTM analysis and all the conditions were standarized. Therefore MTM method was a scientidic measuring way of establishing the standard time. The presented method of this study, suggested an ideal method eliminating unneccesary motions, and presented standardization of works. Improvement of working methods, work condition and simplifying motions in each 10 processes reduced the working time from total 656 seconds to 301 seconds. 9. The way and time of working was linked together in the MTM analysis methods. Thus data from MTM help suggest not only establishing standard time but also establishing stan-dard work. Plus it includes various ability for improvements of working ways. So it is an objective method which can be widely used in other work studies. 10. The function of a time study is to determine the amount of work produced with a given method. The work rate is used to establish the cost of labor. The wage of worker must be calculated per unit time which is deter-mined before the time study is made. This study tried to introduce the incentive rule for deciding wages according to the standard time by MTM method.

• 말소리와 음성과학
• /
• 제5권4호
• /
• pp.81-90
• /
• 2013

This study explored how Korean L2 learners of English utilize multiple acoustic cues (VOT and F0) in perceiving and producing the English alveolar stop with a voicing contrast. Thirty-four 18-year-old high-school students participated in the study. Their English proficiency level was classified as either 'high' (HEP) or 'low' (LEP) according to high-school English level standardization. Thirty different synthesized syllables were presented in audio stimuli by combining a 6-step VOTs and a 5-step F0s. The listeners judged how close the audio stimulus was to /t/ or /d/ in L2 using a visual analogue scale. The L2 /d/ and /t/ productions collected from the 22 learners (12 HEP, 10 LEP) were acoustically analyzed by measuring VOT and F0 at the vowel onset. Results showed that LEP listeners attended to the F0 in the stimuli more sensitively than HEP listeners, suggesting that HEP listeners could inhibit less important acoustic dimensions better than LEP listeners in their L2 perception. The L2 production patterns also exhibited a group-difference between HEP and LEP in that HEP speakers utilized their VOT dimension (primary cue in L2) more effectively than LEP speakers. Taken together, the study showed that the relative cue-weighting strategies in L2 perception and production are closely related to the learner's L2 proficiency level in that more proficient learners had a better control of inhibiting and enhancing the relevant acoustic parameters.

• 한국시뮬레이션학회논문지
• /
• 제21권2호
• /
• pp.91-101
• /
• 2012

자동차 생산라인은 차체라인, 도장라인, 의장라인으로 구성된다. 이러한 생산라인들은 직렬로 배치되어 흐름생산을 거치기 때문에 전후 공정의 상태에 따라 라인에서는 starvation(물량 부족으로 인한 생산 불가능) 또는 blocking(용량 초과로 인한 생산 불가능)으로 인한 정지가 발생한다. 이에 starvation이나 blocking으로 오는 생산 손실을 막기 위해 WBS, PBS와 같은 창고를 개별적으로 보유하여 운영된다. 본 논문은 라인의 버퍼역할을 하는 각 창고들을 통합하여 운영할 수 있는 통합창고 시뮬레이션 모형을 제안한다. 적정 Stacker Crane 대수와 AGV 대수를 구하고, 이를 운영할 수 있는 운영방법론을 제안한다. 또한 개별창고와 통합창고 모형을 시뮬레이션을 이용하여 효율성 비교를 한다.

• 한국정밀공학회지
• /
• 제31권8호
• /
• pp.653-658
• /
• 2014

Roll-to-Roll printing process has become a great issue as a breakthrough for low cost and mass production of electronic devices such as organic thin film transistor, and etc. To print the electronic devices, multi-layer printing is essential, and high precision register control is required for this process. Unlike stop-and-repeat printing process, it is impossible to control the register in a static state since the roll-to-roll process is a continuous system. Therefore, the behavior of web such as polyethylene terephthalate (PET) and polyimide (PI) by the tensile and thermal stress generated in the roll-to-roll process as well as motor control of driven rolls has to be considered for a high precision register control. In this study, the correlation between curing temperature and thermal deformation of PET web is analyzed. Finally, it is verified experimentally that the temperature disturbance generates the more serious register error under the higher curing temperature.

• 대한본초학회지
• /
• 제30권6호
• /
• pp.1-6
• /
• 2015

Objectives : Draconis Resina (DR), the resin of Daemonorops draco Bl., is used to circulate the blood and to stop bleeding. It also has been used to generate flesh including ulceration. The present study investigated the effects of DR extract on collagen metabolism in human fibroblasts and tyrosinase activity in mushroom tyrosinase.Methods : The effect of DR extract on type I procollagen production (collagen type I synthesis) and collagenase (matrix metalloproteinase-1, henceforth referred as MMP-1) activity in human normal fibroblasts cell line. Hs68 cells after ultraviolet B (UVB, 312 nm) irradiation was measured using the enzyme - linked immunosorbent assay (ELISA). The tyrosinase activity was also measured to find out the whitening effects in mushroom tyrosinase by ELISA method.Results : There was no cytotoxicity at DR extract at concentrations of 10 μg/ml, 30 μg/ml, and 100 μg/ml. DR extract significantly inhibited the increase of collagenase activity, whereas it did not show on the reduction of type I procollagen in UVB damaged Hs68 cells. DR extract did not reduce the L - DOPA oxidation. However, it significantly reduced the tyrosinase activity by DR extract at concentraions of 0.1 mg/ml, 1 mg/ml and 10 mg/ml.Conclusions : In conclusion, DR showed the anti-wrinkle and whitening effects via the inhibition of collagenase production and the tyrosinase activity. These results suggest that DR may have potential as an anti-aging ingredient in cosmetic herb markets.

• 음성과학
• /
• 제1권
• /
• pp.55-81
• /
• 1997

In the present paper, V-to-V coarticulation in Korean VCV sequences is discussed, focusing on links between consonantal production and degree of V-to-V coarticulation. Temporal and spatial differences between three types of Korean alveolar stops (lax /t/. aspirated /$t^h$/ and thense /t'/) are examined from VCV sequences involving all possible combinations of three Korean unrounded vowels /a, i,/ based on spectrographic and electrographic data(two male speakers and one female speaker and one female speaker respectively). Closure duration and voice onset time (VOT) were measured from acoustic data. 'Total duration', which is defined as the sum of the closure duration and the VOT, was also calculated in order to see the temporal distance between two vowels in a VCV sequence. Differences in lingual-palatal contact pattern at the maximum contact (MC) point between the three types of stop were observed from EPG data. V-to-V coarticulation was investigated by measuring the offset or onset of the second formant (F2) of the target vowels from spectrograms. Two different dimensions of articulation, temporal and spatial, seem to playa role in determining the degree of V-to-V coarticulation. The degree of V-to-V anticipatory coarticulation is influenced by the spatial characteristics of the intervening consonant while the degree of carryover coarticulation is influenced by the temporal characteristics of the consonant.

• 산업공학
• /
• 제18권2호
• /
• pp.136-147
• /
• 2005

This paper introduces a simulation study regarding the operation of the Painted Body Storage (PBS) in an automobile factory. In the paint shop of the factory, same colored bodies are grouped together in order to increase the effectiveness of process, for example decrease the loss of cleaning the painting-gun when the color of body changes from one to another. However the production of automobiles in the assembly shop is a typical example of the mixed model assembly production. Therefore PBS locates between the paint shop and the assembly shop for control the input sequence of bodies to the assembly shop, and it enables to meet the smoothing requirement of assembly sequence. There are highly restricted constraints on the assembly sequence in a assembly shop. Those are spacing restriction and smoothing restriction. If such restrictions are violated, conveyor-stop or utility work will be necessary. Thus the major objective of PBS is to control the assembly sequence in a way to meet the two restrictions. In this paper a case study of PBS in an automotive factory is introduced. The storage/retrieval algorithms are suggested and the proposed system is verified using simulation models. Sensitivity analysis for operating factors is also conducted.

• 동의생리병리학회지
• /
• 제20권5호
• /
• pp.1327-1333
• /
• 2006

Many traditional herbal remedies exhibit several beneficial effects including anti-inflammation. Panax notoginseng Buck F.H. Chen. is used as a therapeutic agent to stop haemorrhages and a tonic to promote health in Korean and Chinese medicine. The pharrnacokinetic profiles of the main P. notoginseng are still not accurately investigated. The exact mechanism of the anti-inflammatory action of P. notoginseng, however, has not been determined. In the present study, we examined the effect of P. notoginseng on lipopolysaccharide (LPS)-induced nitric oxide (NO) production, and inducible nitric oxide synthase (iNOS) and cyclooxygenase-2 (COX-2) gene expression in RAW264.7 macrophages. The results indicated that P. notoginseng concentration-dependently inhibited LPS-induced NO production. Furthermore, P. notoginseng inhibited the expression of LPS-induced iNOS and COX-2 proteins without an appreciable cytotoxic effect on RAW264.7 cells. Berberine also inhibited LPS-induced iNOS protein as potently as P. notoginseng. This was consistent with the findings that P. notoginseng and also berberine inhibited prostaglandin E2 synthesis induced by LPS.

• Journal of Plant Biotechnology
• /
• 제6권4호
• /
• pp.221-227
• /
• 2004

Protocol was established for production of virus free healthy seeds using meristem ($0.3-0.5\;\cal{mm}$ in size) culture and field management under net house condition in tomato. The isolated meristem was found well established in MS liquid medium containing $0.1\;\cal{mg}\;1^{-1}\;of\;GA_3$. For shoot and root development either from primary meristem or from nodal segment of meristem derived plants, semisolid MS medium having $0.5\;\cal{mg}\;1^{-1}$ of IBA was found most effective. The elimination of the studied viruses (ToMV, CMV, ToLCV) in meristem-derived plants was confirmed by DAS-ELISA test. For field management of the virus eradicated meristem-derived plants, use of net house was found very effective measures to check viral vector visit and eventually infection. The meristem-derived plants were vigor and high yielder than the native seed derived plants and produced healthy seeds. Due to stop vector visit, no viral symptoms were observed in both $R_1\;and\;R_2$ plants cultivated in net house condition. Starting of viral infestation was observed in $R_2$ generation when they were planted in open house condition without control of vector visit. Therefore, for management of viral diseases, use of virus free meristem derived plantlets and their subsequent cultivation in soil under net house condition without using any vector killing insecticide can be recommended for producing healthy seeds in tomato. The developed protocol for environmentally healthy tomato seed production in Bangladesh may be used in the countries having similar tropical like environment conducive for viral vector visit.

• 한국멀티미디어학회논문지
• /
• 제11권9호
• /
• pp.1245-1257
• /
• 2008

이 연구에서는 기존의 클레이 애니메이션 제작 공정이 가지는 문제점을 개선하기 위해 3D 컴퓨터그래픽을 도입한 새로운 제작 공정을 제안한다. 그 핵심은 기존 공정을 바탕으로 하되 대단히 노동집약적인 캐릭터 제작 과정을, 3D 컴퓨터그래픽에 의한 디지털 캐릭터로 대체하는 것이다. 클레이 애니메이션에 등장하는 캐릭터를 3D 컴퓨터그래픽으로 구현하기 위해 클레이 캐릭터와 동일한 색상과 종류의 유성찰흙을 사용하여 폴리곤 모델링 캐릭터의 UVW 좌표 값에 맞춘 디퓨즈 맵과 디스플레이스먼트 맵을 제작하였다. 또한 파노라마 HDRI 자동 촬영 시스템을 개발하여 미니어처 세트 촬영 환경의 조명 정보를 초고해상도의 파노라마 HDRI 형식으로 제작, 이를 디지털 라이팅 소스로 사용하였다. 이 과정을 통해 대단히 사실적인 결과물을 얻음과 동시에 숙달된 작업자의 노하우에만 의존하던 스톱모션 제작 공정을 공학적 접근에 의한 자동화된 방식으로 개선할 수 있었다.