• 한국통신학회논문지
• /
• 제28권12A호
• /
• pp.983-990
• /
• 2003

본 논문에서는 3GPP 모뎀용 비동기식 동기추적회로(noncoherent code tracking loop)를 설계하고 설계된 회로의 정상상태 지터 분산(steady-state jitter variance)과 과도응답 특성(transient response characterisitc)을 해석한다. 먼저, AWGN 환경에서의 지터 분산을 펄스성형 필터(pulse-shaping filter), 타이밍 오프셋(timing offset), 신호 대잡음비(signal-to-interference ratio), 루우프 대역폭(loop bandwidth)에 대한 일반식으로 유도하고, 과도응답 특성을 이론적으로 해석한다. 이를 바탕으로, 디지털 하드웨어 구현이 용이한 가변 대역폭 동기추적회로를 설계하며 설계된 회로와 고정 대역폭 시스템의 성능을 이론적으로 비교, 분석하고 컴퓨터 시뮬레이션을 통해 검증한다.

• 설비공학논문집
• /
• 제23권11호
• /
• pp.705-710
• /
• 2011

Fault detection has to be proceeded by steady state filtering to get rid of transient effect associated with thermal capacity. Coefficient of variance (COV), ratio of standard deviation devided by moving average, was employed as steady-state filter. Engine speed and refrigerant pressures were selected as parameters representing system dynamics. The filtered values were registered as members of steady-state DB. They were found to show good functional relationship with ambient temperature. The relationship was fitted with a second order polynomial and the distribution bounds of the data around the fitted curve were expressed by visual inspection because of varying average and random data interval. Fault data were compared with the steady-state data obtained during normal operation. The fault data were easily isolated from the fault-free one. To make such isolation reliable, tests to construct good DB should be designed in a systematic way.

• 대한전자공학회논문지
• /
• 제19권3호
• /
• pp.37-45
• /
• 1982

본 논문은 변형된 디지탈 Costas loop에 관한 논문으로서 제1부의 계속이다. 본 제2부 논문에서는 시스템에 잡음이 있을 경우 그의 성능을 해석하였다. 입력신호가 white Gaussian 잡음이 첨가되면 고려되는 DPLL의 noise process는 phase error detertor의 tan-1(·)함수에 의해서 Rician이 됨을 보였다. 이 경우 Chapman-Kolmogorov 방정식을 수치적으로 풀므로써 1차와 2차 loop phase error의 steady state probability density함수, mean 및 variance를 얻었으며 이 결과를 컴퓨터 시뮬레이tus에 의해서 입중하였다.

• 한국항행학회논문지
• /
• 제7권1호
• /
• pp.6-13
• /
• 2003

본 논문에서는 3GPP HSDPA 모뎀용 비동기식 동기추적회로를 설계하고, 설계된 동기추적회로에 대하여 정상상태 지터 분산과 타이밍 에러의 과도응답 특성을 이론적으로 분석하였다. 우선 AWGN 환경에서의 지터 분산을 펄스성형 필터, 타이밍 오프셋, 신호 대 잡음비, 루프 대역폭에 대한 식으로 유도하였으며, 과도응답 특성 또한 이론적으로 해석하였다. 끝으로 설계된 동기추적회로의 성능을 컴퓨터 시뮬레이션을 통하여 확인하였다.

• ETRI Journal
• /
• 제42권1호
• /
• pp.26-35
• /
• 2020

Herein, we consider uplink multiuser massive multiple-input multiple-output systems when multiple users transmit information symbols to a base station (BS) by applying simple space-time block coding (STBC). At the BS receiver, two detection filters for each user are used to detect the STBC information symbols. One of these filters is for odd-indexed symbols and the other for even-indexed symbols. Using constrained output variance metric minimization, we first derive a special relation between the closed-form optimal solutions for the two detection filters. Then, using the derived special relation, we propose a new blind adaptive algorithm for implementing the minimum output variance-based optimal filters. In the proposed adaptive algorithm, filter weight vectors are updated only in the region satisfying the special relation. Through a theoretical analysis of the convergence speed and a computer simulation, we demonstrate that the proposed scheme exhibits faster convergence speed and lower steady-state bit error rate than the conventional scheme.

• 품질경영학회지
• /
• 제34권4호
• /
• pp.125-132
• /
• 2006

An adjusted control limit of the $\overline{X}$ chart is proposed for monitoring the continually improving processes. The continual improvement of the process implies the decrease of the process variance, which is represented by a logistic curve. The process standard deviation is estimated by the exponentially weighted moving average of the sample standard deviations from the past to the current times. The control limits are adjusted by the estimated standard deviation at every sampling time. The performance of the adjusted control limit is compared with that of the standard control limits for various cases of the decreasing speed and size of the variance. The results show that the $\overline{X}$ chart with the adjusted control limits provides better performances for monitoring the small and moderate shifts in continually improving processes.

• 한국지능시스템학회논문지
• /
• 제22권5호
• /
• pp.549-554
• /
• 2012

본 논문에서는 추정 분산 제약을 갖는 비선형 이산시간에 대한 최적의 퍼지 필터에 대한 내용을 다루고자 한다. 필터를 설계할 때, 추정오차의 분산값은 필터의 성능이 결정하는 변수중 하나다. 이런 분산값에 더욱 강인한 필터를 설계하고자, 분산 제약 조건을 주어 필터를 설계하고자 한다. 먼저, 비선형 모델을 Tagaki-Sugeno 퍼지 모델을 이용하여 선형 모델로 변형한 후, 이 모델을 기반으로 선형 필터를 디자인한다. 이때 필터설계 과정 중 필터의 각 파라미터값을 구하기 위해 상태 추정오차 값은 평균제곱에 제한되며, 상태오차의 정상상태 분산값은 각각의 미리 정한 상한 제한 값 보다 작은 조건에서 필터를 설계하여 선형행렬부등식과 대수 이차 행렬부등식을 이용하여 파라미터값을 구한다. 이렇게 설계된 퍼지 필터는 트럭트레일러 시뮬레이션을 통해 설계 과정과 성능을 보여준다.

• Fibers and Polymers
• /
• 제7권4호
• /
• pp.424-431
• /
• 2006

Roll drafting, a mechanical operation attenuating fiber bundles to an appropriate thickness, is an important operation unit for manufacturing staple yams. It influences not only the linear density regularity of the slivers or staple yams that are produced, but also the quality of the textile product and the efficiency of the thereafter processes. In this research, the dynamic states of the fiber bundle in the roll drafting zone were analyzed by simulation, based on the mathematical model that describes the dynamic behavior of the flowing bundle. The state variables are the linear density and velocity of the fiber bundles and we simulated the dynamics states of the bundle flow, e.g., the profiles of the linear density and velocity in the draft zone for various values of the model parameters and boundary conditions, including the initial conditions to obtain their influence on the dynamic state. Results showed that the mean velocity profile of the fiber bundle was strongly influenced by draft ratio and process speed, while the input sliver linear density has hardly affected the process dynamics. Velocity variance of individual fibers that could be supposed to be a disturbing factor in drafting was also influenced by the process speed. But the major disturbance occurred due to the velocity slope discontinuity at the front roll, which was strongly influenced by the process speed. Thickness of input sliver didn't play any important role in the process dynamics.

• Transactions on Control, Automation and Systems Engineering
• /
• 제1권2호
• /
• pp.113-120
• /
• 1999

One of the important challenges facing control engineers in developing automated machineryis to be able to monitor the machines using remote sensors. Observrs are often used to reconstruct the machine variables of interest. However, conventional observers are unalbe to observe the machine variables when the machine models, upon which the observers are based, have inputs that cannot be measured. Since this is often the case, the authors previsously developed a steady-state optimal state and input observer for time-invariant systems [1], this paper extends that work to time-variant systems. A recursive observer, similar to a Kalman-Bucy filter, is developed . This optimal observer minimizes the trace of the error variance for discrete , linear , time-variant, stochastic systems with unknown inputs.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.227-231
• /
• 2004

In this paper, a robust Sliding Mode Variable Structure (SMVS) controller is designed for Active Queue Management (AQM). This type of controller is insensitive to noise and variance of the parameters, thus it is suitable to time varying network systems. Simulation results conform the robust performance of SMVS controller against the disturbance. At the same time, a complete comparison between SMVS and PI controllers is made. The conclusion is that both transient and steady state performance of SMVS controller is better than that of PI one.