• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.1184-1189
• /
• 2004

Coking process is the thermal decomposition of bituminous coal with final temperature of about $900^{\circ}C$ Because coke plays important roles in ironmaking process in a blast furnace it's essential for developing modeling of coke oven. In this study, An unsteady 2-dimesional model is proposed to simulate coking process in a coke oven. In this model, gas and solid phase are assumed homogeneous continnum and solid bed is assumed as porous media . The model contains governing equations for the solid phase and the gas phase. Complicated phenomena such as swelling, softening, resolidification and shrinkage are neglected and mass loss by drying and devolatilization is reflected by generation of internal pores. Drying, devolatilization, heat transfer and generation of internal pores are also reflected in source terms. Calulated results are compared with experimental data

• Analytical Science and Technology
• /
• v.6 no.5
• /
• pp.509-514
• /
• 1993

Benomyl, topsin-M and thiram been known as one of the seed disinfectant. For these studies benomyl, topsin-M and thiram simultaneously had been analyzed by high performance liquid chromatographic method using ODS cartridge, benomyl, topsin-M and thiram was chromatographed using an ODS column and eluent 40% Acetonitrile at a flow rate of 1ml/min. The UV Detector responses at 276nm.

• Journal of Powder Materials
• /
• v.12 no.4 s.51
• /
• pp.255-260
• /
• 2005

Direct solid state synthesis by hot pressing has been applied in order to produce high efficiency $Zn_4Sb_3$ bulk specimens. Single phase $Zn_4Sb_3$ with 98.5% of theoretical density was successfully produced by direct hot pressing of elemental powders containing 1.2 at.% excess Zn. Thermoelectric properties as a function of temperature were investigated from room temperature to 600 K and compared with results of other studies. Transport properties at room temperature were also evaluated. Thermoelectric properties of single phase $Zn_4Sb_3$ materials produced by direct synthesis were measured and are comparable to the published data. Direct solid state synthesis by hot pressing provides a promising processing route in this material.

• Journal of the Korean Applied Science and Technology
• /
• v.19 no.4
• /
• pp.281-290
• /
• 2002

Dermorphin is a hepta peptide(H-Tyr-DAla-Phe-Gly-Tyr-Pro-Ser-$NH_{2}$)with exceptionally potent and long-lasting peripheral and central activity. Dermorphin analogues, dermorphionyl(DMP)-Lys-$NH_{2}$ and DMP-Lys-Lys-$NH_{2}$ have been prepared in order to examine the effect of opiod activity. Dermorphin analogues were synthesized by the solid phase method. The crude peptide was purified by gel filter on a Sephadex LH-20, characterized with HPLC and amino acid analyzer. Analgesic potency was estimated by writhing syndrome method and Randall-Selitto method. As a result, dermorphin analogues have lower potency than that of morphine.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.620-623
• /
• 2001

The peculiarities of using Self-propagating High-temperature Synthesis (SHS) and solid state phase synthesis for production of high temperature superconductor materials are discussed. Oxide superconductors with general formula $ReBa_2$$Cu_3$$O_{7-x}$ (Re= Y, Yb, Sm, Nd) have been made with using barium oxide initial powder instead of traditional barium carbonate. X-ray powder diffraction showed a single phase orthorhombic perovskite structure was produced in all reactions. Phenomena observed during the grinding of the reactant mixture are presented. Mechano-chemical activation - as a pretreatment of the reactant mixture - strongly influences the kinetic parameters, the reaction mechanism, and the composition and structure of the final product.

• Proceedings of the KIEE Conference
• /
• 2001.11c
• /
• pp.209-211
• /
• 2001

The core in developing the transformer-operated 3 phase solid state meter is to design a single chip IC, that incorporates all the necessary features required for development of the 3 phase solid state meter. Using this technology, the solid state meter can be mass produced at lower cost and higher quality. This report deals with the performance of the prototype FPGA board, which is the final step before actual IC fabrication in fabrication LAB. All the features of FPGA board, shown in this report will be included in the final ASIC IC product.

• Archives of Pharmacal Research
• /
• v.21 no.3
• /
• pp.231-235
• /
• 1998

A sensitive enzyme immunoassay for serum TSH has been developed utilizing the tight binding between biotin and avidin, and three layered protein polystyrene beads as solid phase. To increase binding capacity of TSH and sensitivity of the assay, the polystyrene beads were coated sequentially with mouse immunoglobulin as first layer, rabbit antimouse immunoglobulin as second layer and monoclonal anti-TSH as third layer. A serum sample was incubated simultaneously with a monoclonal anti-TSH immobilized polystyrene beads and a second monoclonal anti-TSH covalently attached to biotin. After washing, the antibody bound serum TSH-anti-TSH-biotin complex is reacted with horseradish peroxidase (HRP)-labeled avidin. Following second wash, the bound HRP activity was measured calorimetrically. Reproducible results were obtained within 4 hours for serum TSH in the range between $0{\mu}\textrm{IU}$ml and ${50}{\mu}\textrm{IU}$ml with detection limit of $0.1{\mu}\textrm{IU}$ per test.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.6 no.1
• /
• pp.16-21
• /
• 2006

A simple doping method to fabricate a very thin channel body of the p-type FinFETs with a 20 nm gate length by solid-phase-diffusion (SPD) process was developed. Using the poly-boron-films (PBF) as a novel diffusion source of boron and the rapid thermal annealing (RTA), the p-type sourcedrain extensions of the FinFET devices with a threedimensional structure were doped. The junction properties of boron doped regions were investigated by using the $p^+-n$ junction diodes which showed excellent electrical characteristics. Single channel and multi-channel p-type FinFET devices with a gate length of 20-100 nm was fabricated by boron diffusion process using PBF and revealed superior device scalability.

• Journal of Environmental Science International
• /
• v.12 no.1
• /
• pp.81-86
• /
• 2003

The study was carried out to evaluate the new analytical method of phthalate esters(diethylphthalate, di-n-butylphthalate, butylbenzylphthalate, bis(2-ethylhexyl)phthalate), one of the endocrine disruptors, which were performed by GC/MS-SIM(selected ion monitoring). The phthalate esters were extracted from water samples using solid-phase extraction on $C_{18}$ columns. It investigated that the extraction recovery rate of phthalate esters with different solvents and solvent volume. The optimal solvent was dichloromethane and proper volume of dichloromethane for recovery of phthalate esters was 4 mL. There were good linearities(above $R^2$=0.9975) in the range 0.01~0.50mg/L, and the detection limits were below 0.01~0.03$\mu\textrm{g}$/L. The recovery rates, RSD and MDLs for phthalate esters were 80~114%, 5.0~8.1% and 0.03~0.11$\mu\textrm{g}$/L, respectively. This method shows a good precision of phthalate esters.

• Analytical Science and Technology
• /
• v.30 no.1
• /
• pp.20-25
• /
• 2017

An analytical method for determining potential endocrine disruptors (bisphenol A, 2-chlorophenol, 2,4-dichlorophenol, 2,4,6-trichlorophenol, pentachlorophenol, p-t-butylphenol, p-pentylphenol, p-hexylphenol, p-t-octylphenol, p-heptylphenol, nonylphenol) by solid-phase extraction (SPE) and High Perfomance Liquid Chromatography(HPLC) equipped with fluorescence and variable wavelength detector has been developed. The SPE process for sample concentration was performed on a commercially available Oasis HLB cartridge packed with polymeric sorbents. The effect of elution solvent and elution volume on the recoveries of the analytes were investigated with HPLC. Average recovery of >85% was achieved with 60mg sorbents using 5mL of methanol as elution solvent. Phenolic compounds in canned drinks, beverages and water samples were surveyed by this proposed method.