• Proceedings of the KIEE Conference
• /
• 1999.07g
• /
• pp.3067-3069
• /
• 1999

In this paper, A bit processor for controlling sequence logic was implemented, using a FPGA. This processor consists of program memory interface. I/O interface, parts for instruction fetch and decode, registers, ALU, program counter and etc. This FPGA is able to execute sequence instruction during program fetch cycle, because of divided bus system, program bus and data bus. Also this bit processor has instructions set that 16bit or 32bit fixed width, so instruction decoding time and data memory interface time was reduced. This FPGA was synthesized by pASIC 2 SpDE and Synplify-Lite synthesis tool of Quick Logic company. The final simulation for worst cases was successfully performed under a Verilog HDL simulation environment. And the FPGA programmed for an 84 pin PLCC package. Finally, the benchmark was performed to prove that Our FPGA has better performance than DSP(TMS320C32-40MHz) for the sequence logic control of PLC.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.5 no.4
• /
• pp.229-236
• /
• 2005

This paper presents a system level architecture evaluation technique that leverages transaction level modeling but also significantly extends it to the realm of system level performance evaluation. A major issue lies with the modeling effort. To reduce the modeling effort the proposed technique develops the concept of worst case scenarios. Since the memory controller is often found to be an important component that critically affects the system performance and thus needs optimization, the paper further addresses how to evaluate and optimize the memory controllers, focusing on the test environment and the methodology. The paper also presents an industrial case study using a real state-of-the-art design. In the case study, it is reported that the proposed technique has helped successfully find the performance bottleneck and provide appropriate feedback on time.

• Proceedings of the KIEE Conference
• /
• 2003.11b
• /
• pp.59-62
• /
• 2003

The purpose of this paper is to present how to implement Segment_LCD display using SoC design. The SoC design is achieved by using an ARM_based Excalibur device. The Excalibur device offers an outstanding embedded development platform with ARM922T and FPA. The design in the Excailbur device uses the embedded AR띤 Processor core and the AMBA high-performance bus (AHH) to write to a memory-mapped slave peripheral in the FPGA portion of the device. Here, Segment_LCD is one kind of memory-mapped slave peripherals. In order to Implement the Segment_LCD display based on SoC design, four steps are fellowed. At first, IP modules are made by using Verilog HDL. Secondly, the ARM processor of the Excalibur is programmed using C in ADS (ARM Developer Suite). And in the third step, the whole system is simulated and verified. At last, modules are downloaded to SoCMaster kit. Both Quartus II software and ModelSim5.5e software are the key software tools during the design.

• Smart Media Journal
• /
• v.1 no.1
• /
• pp.1-9
• /
• 2012

This Paper proposes an effective SoC hardware architecture implementing a VDP for Full HD TVs. The proposed architecture makes real time video processing possible with supporting efficient bus architecture and flexible interface. Video IP cores in the VDP are designed to provide a high quality of improved image enhancement function. The Avalon interface is adopted to guarantee real-time capability to IPs as well as SoC integration. This leads to reduced design time and also enhanced designer's convenience due to the easiness in IP addition, deletion, and revision for IP verification and SoC integration. The embedded software makes it possible to implement flexible real-time system by controlling setting parameter details and data transmitting schemes in real-time. The proposed VDP SoC design is implemented on Cyclon III SoPC platform. The experimental results show that our proposed architecture of the VDP SoC successfully provides required quality of Video image by converting SD level input to Full HD level image.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.3
• /
• pp.410-415
• /
• 2002

This paper describes the implementation of a SoC(System-on-a-Chip) and an ISDN communication terminal by the SoC in ISDN network. The SoC has been developed with the functions of 32-bit ARM7TDMI RISC core processor, network connection with S/T interface, TDM--bus interface and voice codec, user interface. And we also review the developed software structure and the ISDN service protocol procedures which are working on the SoC. And finally this paper describers a structure of an ISDN terminal equipment using the implemented SoC and terminal software.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.1
• /
• pp.46-51
• /
• 2010

We propose the novel Hybrid bus arbitration policy that prevents a priority monopolization presented in fixed priority and effectively assigns a priority to each master by mixing fixed priority and round-robin arbitrations. The proposed arbitration policy and the others were implemented through Verilog and mapped the design into Hynix 0.18um technology and compared about gate count and area overhead. In the results of performance analysis, we confirm that our proposed policy outperforms the others and effectively controls the bus utilization.

• Journal of IKEEE
• /
• v.26 no.3
• /
• pp.437-444
• /
• 2022

This paper proposes a CRC error verification method for SPI and I2C buses of automotive semiconductors. In automotive semiconductors, when an error occurs in communication and an incorrect value is transmitted, fatal results may occur. Unlike LIN communication and CAN communication, in communication such as SPI and I2C, there is no frame for detecting an error, so some definitions of new standards are required. Therefore, in this paper, the CRC error detection mode is newly defined in the SPI and I2C communication protocols, and the verification is presented by designing it in hardware.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.417-419
• /
• 2004

Because of the demands for high performance and high integrated system, the needs for optimal platform becomes more importance. Optimal platform can handle more data effectively with same resources. AMBA(Advanced Microprocessor Bus Architecture)$^{TM}$ defines on-chip communication standard for designing high performance embedded micro-controllers. It is consisted of AHB, ASB and APB. It can support fast implementation and reliability in system that is composed with reusable IPs. DMAC is one of master in system and generate master signals of AHB to communicate data from one slave(peripheral or memory) to another slave. It can reduce burden of CPU and increase system performance. We designed DMAC based on AMBA and it supports 13 Channels. Each channel can be controlled by software program. It decides channel's priority using round-robin method. It can support P2P, P2M, M2P and P2P communication.

• Annual Conference of KIPS
• /
• 2013.11a
• /
• pp.1525-1527
• /
• 2013

본 논문에서는 저시력자의 개선된 독서 환경을 제공하는 시각보조기기를 위한 실시간 영상처리 SoC(System on Chip) 하드웨어 구조 설계에 대해서 기술한다. 기존의 시각보조기기는 화면 영상이 실제 움직임보다 늦게 출력되는 잔상 현상이 발생하며, 색 변환 기능도 제한적이다. 따라서 본 논문에서 제안하는 실시간 영상처리 SoC 하드웨어 구조는 데이터 연산을 최소화함으로써 잔상 현상이 감소되며, 저시력자를 위한 다양한 색상 모드를 지원한다. 제안하는 영상처리 SoC 하드웨어 구조는 Core-A 모듈, Memory Controller 모듈, AMBA AHB bus 모듈, ISP(Image Signal Processing) 모듈, TFT-LCD Controller 모듈, VGA Controller 모듈, CIS Controller 모듈, UART 모듈, Block Memory 모듈로 구성된다. 시각보조기기를 위한 실시간 영상처리 SoC 하드웨어 구조는 Virtex4 XC4VLX80 FPGA 디바이스를 이용하여 검증하였으며, TSMC 180nm 셀 라이브러리로 합성한 결과 동작주파수는 54MHz, 게이트 수 197k이다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.15 no.1
• /
• pp.85-95
• /
• 2015

Network-on-chip (NoC) has evolved to overcome the issues of traditional bus-based on-chip interconnect. In NoC-reuse as TAM, the test schedulers are constrained with the topological position of cores and test access points, which may negatively affect the test time. This paper presents a scalable hybrid test data transportation scheme that allows to simultaneously test multiple heterogeneous cores of NoC-based SoCs, while reusing NoC as TAM. In the proposed test scheme, single test stimuli set of multiple CUTs is embedded into each flit of the test stimuli packets and those packets are multicast to the targeted CUTs. However, the test response packets of each CUT are unicast towards the tester. To reduce network load, a flit is filled with maximum possible test response sets before unicasting towards the tester. With the aid of Verilog and analytical simulations, the proposed scheme is proved effective and the results are compared with some recent techniques.