본고(本稿)에서는 1989년 1월에 시행된 관세율(關稅率) 조정(調整)이 산업별(産業別) 생산(生産), 수출입(輸出入), 물가지수(物價指數), 고용(雇傭) 등에 미치는 영향을 한국경제(韓國經濟)의 다부문(多部門) 일반균형(一般均衡)을 통하여 분석하였다. 분석결과에 의하면 관세율(關稅率)의 조정(調整)은 대부분의 산업(産業)에서 수입(輸入)과 수출(輸出)을 동시에 증가(增加)시키나 수입(輸入)의 증대가 수출(輸出)의 증대보다 더 커서 국제수지(國際收支)는 악화된다. 또한 관세율(關稅率) 조정(調整)은 명목국민(名目國民) 총생산(總生産)을 증대시키고 물가(物價)를 하락(下落)시킨다. 수입(輸入)의 증가율이 큰 산업(産業)으로는 의복, 혁제품, 나무제품 산업(産業)을 들 수 있으며 수출(輸出)은 대부분의 산업(産業)에서 증가하나 특히 수입(輸入)된 원자재(原資材)를 많이 사용하는 비철금속 1차제품, 혁제품, 석탄제품, 고무제품산업의 수출증가율(輸出增加率)이 높다. 산업별생산(産業別生産)을 보면 혁제품, 비철금속 1차제품, 화학제품, 종이 지제품, 목제품 등 일부 수입경쟁산업(輸入競爭産業)에서는 생산(生産)이 감소(減少)되나 기타의 산업(産業)에서는 생산(生産)이 증가된다. 일반적으로 수출(輸出)의 비중이 높은 산업(産業)에서 생산(生産) 및 고용(雇傭)의 증가율이 높다.
본 연구에서는 누에번데기 또는 누에애벌레를 기주로 하여 인공 재배된 밀리타리스동충하초의 고형암 성장억제 및 면역조절 기능을 평가하였다. 이를 위해 sarcoma-180 세포주를 겨드랑이에 피하 이식받은 ICR 마우스를 대상으로 밀리타리스동충하초 또는 유효성 분으로 알려진 cordycepin을 10일간 복강투여한 후 고형암 성 장저지능, 면역관련 장기의 무게변화, 비장 내 면역세포수의 변화, 그리고 비장세포에 의한 interleukin-2(IL-2) 생성능을 측정하여 다음과 같은 결론을 얻었다. 겨드랑이에 고형암을 이식받은 마우스에게 50 mg/kg(CMP50) 또는 100 mg/kg(CMP100)의 누에번데기 밀리타리스동충하초 추출물을 10일간 투여한 결과 생리식염수를 투여한 대조군에 비해 3주 후 고형암 성장이 47.3% 및 57.6% 유의하게 억제되었다(p<0.05). 50 mg/kg(CML50) 및 100 mg/kg(CML100)의 누에애벌레 밀리타리스동충하초를 투여받은 경우 35.5% 및 37.1%, 그리고 1 mg/kg 및 2 mg/kg의 cordycepin을 투여받은 군의 경우 26.1%와 29.8%의 고형암 성장 억제효과가 관찰되었다(p<0.05). 고형암을 이식받은 후 누에번데기 또는 누에애벌레 밀리타리스동충하초를 투여받은 마우스는 대조군에 비해 흉선무게가 38∼44% 유의하게 증가하였고(p<0.05), 비장내 CD4+ 및 CD8+ T-세포수, NK-세포수(63∼110% 증가), 그리고 비장세포에 의한 IL-2 생성능(33∼51%증가)이 모두 유의하게 증가하였다(p<0.05). 이상의 결과를 종합해 볼 때, 밀리타리스동충하초 열수추출물은 고형암의 성장을 억제하는 효과가 있으며, 이와 같은 밀리타리스동충하초 추출물의 항암활성은 면역기능 증강효과와 연관이 있을 것으로 생각된다. 아울러 밀리타리스동충하초의 고형암 성장억제 및 면역조절 기능은 cordycepin 단일물질에 비해 더 우수하였다.
본 설계에서는 최근 부상하고 있는 motor control, 3-phase power control, CMOS image sensor 등 각종 센서 응용을 위해 고해상도와 저전력, 소면적을 동시에 요구하는 12b 200KHz 0.52mA $0.47mm^2$ 알고리즈믹 ADC를 제안한다. 제안하는 ADC는 요구되는 고해상도와 처리 속도를 얻으면서 동시에 전력 소모 및 면적을 최적화하기 위해 파이프라인 구조의 하나의 단만을 반복적으로 사용하는 알고리즈믹 구조로 설계하였다. 입력단 SHA 회로에서는 고집적도 응용에 적합하도록 8개의 입력 채널을 갖도록 설계하였고, 입력단 증폭기에는 folded-cascode 구조를 사용하여 12비트 해상도에서 요구되는 높은 DC 전압 이득과 동시에 층L분한 위상 여유를 갖도록 하였다. 또한, MDAC 커패시터 열에는 소자 부정합에 의한 영향을 최소화하기 위해서 인접 신호에 덜 민감한 3차원 완전 대칭 구조의 레이아웃 기법을 적용하였으며, SHA와 MDAC 등 아날로그 회로에는 향상된 스위치 기반의 바이어스 전력 최소화 기법을 적용하여 저전력을 구현하였다. 기준 전류 및 전압 발생기는 칩 내부 및 외부의 잡음에 덜 민감하도록 온-칩으로 집적하였으며, 시스템 응용에 따라 선택적으로 다른 크기의 기준 전압을 외부에서 인가할 수 있도록 설계하였다. 또한, 다운 샘플링 클록 신호를 통해 200KS/s의 동작뿐만 아니라, 더 적은 전력을 소모하는 10KS/s의 동작이 가능하도록 설계하였다. 제안하는 시제품 ADC는 0.18um n-well 1P6M CMOS 공정으로 제작되었으며, 측정된 DNL과 INL은 각자 최대 0.76LSB, 2.47LSB 수준을 보인다. 또한 200KS/s 및 10KS/s의 동작 속도에서 SNDR 및 SFDR은 각각 최대 55dB, 70dB 수준을 보이며, 전력 소모는 1.8V 전원 전압에서 각각 0.94mW 및 0.63mW이며, 시제품 ADC의 칩 면적은 $0.47mm^2$ 이다.
본 연구는 경제적이고 효율적으로 돈 슬러리를 분리할 수 있는 새로운 고형물 분리 시스템을 개발하여 최적 시스템의 운행요건을 구명하고 1일 처리용량 200$\ell$ 규모의 pilot에서 분리 시스템의 인자도출 및 분리효율 분석결과는 다음과 같다. 1. 돈 슬러리의 고형물 분리를 위해 간이 저장조와 순환조, 고정식 생물막조로 구성되는 시스템을 개발하여 본시험에 공시하였다. 2. 시스템의 효율을 구명하기 위해서 폭기량과 스크류 배출기의 회전수를 측정한 결과 폭기량은 0.3 l /min에서 Bulking 현상이 거의 나타나지 않았으며 슬럿지 부유현상은 매우 경미하였고 침전효과가 좋았으며 스크류배출기의 회전수는 114ppm에서 고형물 수분 함량이 62%로 수분조절재 없이 축분 퇴비화할 수 있는 조간이 형성되었다. 3. 순환조의 순환 횟수에 따른 오염농도감소는 유입 슬러리의 농도가 낮고 높음에 관계없이 일정한 수준을 감소시켜 주었다. 본 시험에 이용되는 돈 슬러리의 오염농도는 BOD$_{5}$, COD/ sub Mn/, and SS가 각각 15,970($\pm$2,389)mg/l , 20,0040($\pm$5,512)mg/l 및 26,486 ($\pm$5,935)mg/ l 이었으나 순환조의 2회 순환시$BOD_5,\;COD_{Mn}$, and SS 가 각각 5,630mg/l, 5,260mg/l 및 1,250mg/l으로 감소되었다. 4. 따라서, 이 시스템을 돈 슬러리 정화의 전처리시스템으로 적용함으로서 고형물은 수분조절재가 없이 퇴비화 할 수 있고 돈슬러리를 정화처리시 고농도의 오염물질 때문에 처리효율이 떨어지는 활성오니법의 단점을 보완케 함으로서 활성오니 법을 이용한 정화 효율을 크게 높일 수 있을 것으로 사료된다.관찰되었다.3시간 SO$_2$폭로군에서 대조군에 비해 많이 증가하였고 그외의 실험군에서는 대조군에 비해 대부분의 세포에서 감소하거나 소실되었으며 대조군에서 나타나지 않던 점액화된 상피세포들은 모두 SO$_2$폭로군에서 중섬점액질만을 함유하고 있었으며 100 ppm 및 200ppm SO$_2$폭로군에서 그 양이 감소하는 경향을 나타내었다. 산성점액질의 양은 10 ppm 및 50ppm 3시간 SO$_2$폭로군에서는 대조군에 비하여 많이 증가하였으나. 그외 대부분의 SO$_2$폭로군에서는 현전히 감소하거나 소실되었다. 대조군에 비해 SO$_2$폭로군에서 강 sulfomucin은 감소하는경향을 나타내었고, 100 ppm및 200 ppm SO$_2$폭로군에서 강 sulfomucin은 소실되었으나 sialomucin은 대조군에 비해 증가하는경향을 보였다. 하비중격선의 중성점액질은 양은 대조군에 비해 SO$_2$폭로군에서 감소하는 경향을 나타내었으며 100ppm및 200ppm SO$_2$ 폭로군에서 그 감소가 아주 현저하게 대부분의 선포들에서 중성 점액질이 소실되었다. 이상의 결과로 보아 SO$_2$는 비강에 심대한 병리조직학적 변화뿐만 아니라 점액질 대사에 심대한 영향을 미쳐 심한 병변을 야기시킴을 알수 있었다. 전반적으로 SO$_2$의호흡기 영향은 고농도로 갈수록 심한 영향을 미쳤으며 저 농도 에서도 폭로시간이 길어짐에 따라 나타나는 SO$_2$의영향이 고농도와 유사한경향을 나타내며 또한 모든 SO$_2$의 농도를 비교해보면 폭로 시간이 길어질수록 그영향이 더 심하게 나타났다.ate to harvest
Sodium carboxymethylcellulose(SCMC)와 Hyaluronic acid(HA)가 수정란 이식 및 채란을 위한 복강 수술 후 생식기의 유착 방지 효과 여부를 확인하기 위하여 본 실험을 수행하였다. 실험 동물로 성숙한 암컷 한국 흑염소 20두를 대조군, saline 투여군, SCMC 1%, SCMC 2% 및 HA 0.4% 투여군에 각각 4마리씩 배치하였다. 수정란 채취를 위한 통상적인 방법의 수술을 시행한 후 약물 주입용 카테터를 절개부를 통하여 복강에 정착시킨 후 앞쪽에 끼운 채로 복막과 피부를 봉합한 후 약물을 처치하였다. 각 군의 흑염소들에 각각 체중 10 kg 당 50ml의 용액을 복강내로 투여하였으며, 대조군은 무처치하였다. 각 군은 3주 후에 상기와 동일한 방법으로 개복 수술하여 좌 우측의 자궁 및 난관채에서부터 난소까지의 2 부분으로 구분하여 각 부분의 유착 정도를 유착 범위, 피막의 상태 및 유착부의 분리 여부에 대해 각각의 등급을 정하여 판정하였고, 실험 동물의 반복 이용 가능성에 대해 알아보고자 똑같은 처치 방법으로 수술과 등급 판정을 반복하였다. 1차 실험에서는 자궁과 난소쪽 모두에서 SCMC 2%군의 점수$(mean{\pm}SD)$가 각각 $0.8{\pm}1.4$ 및 $1.5{\pm}2.8$로서 다른 군에 비해 유의적으로 낮았으며(P<0.05), 반복된 2차 실험에서도 SCMC 2% 군의 자궁과 난소에서의 점수가 각각 $4.1{\pm}1.6$ 및 $1.9{\pm}2.1$로서 다른 군에 비해 유의적으로 낮았다(p<0.05). 3차 실험에서 자궁의 판정 점수는 SCMC 1%가 $6.0{\pm}2.0$, 난소 점수는 SCMC 2% 가 $4.0{\pm}1.1$,로 다른 군에 비해 낮았고, 4차 실험에서는 자궁과 난소 모두에서 SCMC 2%가 각각 $7.0{\pm}2.1$, 및 $3.2{\pm}1.9$,로 다른 군에 비해 낮았으나 유의성은 없었다. 반복되는 실험 결과에 따른 비교시 모든 군에서 실험횟수가 반복될수록 유착점수가 높게 나타났다. 결론적으로 한국흑염소에서 수정란의 채취 및 이식을 위한 개복 수술 후 SCMC 2% 용액을 복강 내로 주입하는 것이 다른 처치에 비해 생식기의 유착 방지에 효과가 있으며, 반복 수술에 따른 생식기 유착 정도를 완화시켜줄 것으로 생각된다.
최근 영상 처리 기법의 발전으로 영상의 질은 저하시키지 않고 검사 소요시간을 단축시키는 방법들이 개발되고 있다. 특히 단층 촬영의 경우 영상 재구성 방법을 개선하여 영상의 질이 우수한 영상을 획득할 수 있게 되었다. Philips사의 PRECEDENCE 16 감마카메라를 이용해 보편적으로 시행하고 있는 분석법에 의한 FBP 방법과 반복법에 의한 Astonish, 3D OSEM 방법을 이용해 각각 영상을 재구성하여 정성적인 분석과 정량적인 분석을 통해 영상 획득시간을 다르게 한 영상간의 비교와, 동일한 시간으로 획득한 영상을 비교하여 영상의 질이 우수한 재구성 방법에 대해 연구 하였다. 정성적인 분석을 위해 blind test를 한 결과, 영상 획득시간에 따른 영상의 질은 거의 차이가 없는 것을 확인할 수 있었다. 또한 정량적인 분석을 통해서도 영상 획득시간에 따른 영상의 질은 통계적으로 유의한 차이가 없었다. 하지만 영상 획득시간이 동일한 영상을 재구성 방법에 따라 분석한 결과는 통계적으로 유의한 차이가 있음을 확인할 수 있었다. 영상의 질은 반복법을 이용하는 Astonish에 의해 재구성된 영상이 해상력이 좋고 임상적으로 진단적 정보를 제공하는데 우수한 영상으로 판단된다. 영상을 재구성하기 위한 소요시간이 길고 저장 공간의 부족 등으로 현재까지 많이 사용되지 않던 반복법에 의한 재구성 방법이 영상의 질은 향상시키고 검사시간은 단축 할 수 있는 방법이 될 수 있음을 확인하였다.
The Highway Capacity Manual specifies procedures for evaluating intersection performance in terms of delay per vehicle. What is lacking in the current methodology is a comparable quantitative procedure for ass~ssing the safety-based level of service provided to motorists. The objective of the research described herein was to develop a computational procedure for evaluating the safety-based level of service of signalized intersections based on the relative hazard of alternative intersection designs and signal timing plans. Conflict opportunity models were developed for those crossing, diverging, and stopping maneuvers which are associated with left-turn and rear-end accidents. Safety¬based level-of-service criteria were then developed based on the distribution of conflict opportunities computed from the developed models. A case study evaluation of the level of service analysis methodology revealed that the developed safety-based criteria were not as sensitive to changes in prevailing traffic, roadway, and signal timing conditions as the traditional delay-based measure. However, the methodology did permit a quantitative assessment of the trade-off between delay reduction and safety improvement. The Highway Capacity Manual (HCM) specifies procedures for evaluating intersection performance in terms of a wide variety of prevailing conditions such as traffic composition, intersection geometry, traffic volumes, and signal timing (1). At the present time, however, performance is only measured in terms of delay per vehicle. This is a parameter which is widely accepted as a meaningful and useful indicator of the efficiency with which an intersection is serving traffic needs. What is lacking in the current methodology is a comparable quantitative procedure for assessing the safety-based level of service provided to motorists. For example, it is well¬known that the change from permissive to protected left-turn phasing can reduce left-turn accident frequency. However, the HCM only permits a quantitative assessment of the impact of this alternative phasing arrangement on vehicle delay. It is left to the engineer or planner to subjectively judge the level of safety benefits, and to evaluate the trade-off between the efficiency and safety consequences of the alternative phasing plans. Numerous examples of other geometric design and signal timing improvements could also be given. At present, the principal methods available to the practitioner for evaluating the relative safety at signalized intersections are: a) the application of engineering judgement, b) accident analyses, and c) traffic conflicts analysis. Reliance on engineering judgement has obvious limitations, especially when placed in the context of the elaborate HCM procedures for calculating delay. Accident analyses generally require some type of before-after comparison, either for the case study intersection or for a large set of similar intersections. In e.ither situation, there are problems associated with compensating for regression-to-the-mean phenomena (2), as well as obtaining an adequate sample size. Research has also pointed to potential bias caused by the way in which exposure to accidents is measured (3, 4). Because of the problems associated with traditional accident analyses, some have promoted the use of tqe traffic conflicts technique (5). However, this procedure also has shortcomings in that it.requires extensive field data collection and trained observers to identify the different types of conflicts occurring in the field. The objective of the research described herein was to develop a computational procedure for evaluating the safety-based level of service of signalized intersections that would be compatible and consistent with that presently found in the HCM for evaluating efficiency-based level of service as measured by delay per vehicle (6). The intent was not to develop a new set of accident prediction models, but to design a methodology to quantitatively predict the relative hazard of alternative intersection designs and signal timing plans.
An alternative design to conventional class II cavity preparation for proximal carious lesions is the tunnel preparation. It preserves the marginal ridge intact, thus making it possible to maintain the natural contact relationship with the adjacent tooth and minimize tooth reduction. This in vitro study was purposed to evaluate the effect of the materials' elastic constants and shear-bond strength on the marginal ridge fracture resistance of teeth restored by the tunnel technique, and to find the materials of choice for tunnel restorations. $Resinomer^{(R)}$, $Ketac-silver^{(R)}$, $Miracle-Mix^{(R)}$, and Tytin were used as restorative material. The elastic constants of each restorative material were evaluated by ultrasonic pulse measurement. Young's modulus and bulk modulus of the restorative materials were evaluated in three specimens for each material type. The shear-bond strength of the restorative materials to the dentin surface was measured after thermocycling 400 times between 6 and $60^{\circ}C$, using ten specimens for each material type. For measuring marginal ridge strength, 60 sound extracted molar teeth were distributed into six groups by size. Sound molar teeth were used as a Control group and unfilled prepared teeth were grouped as Unrestored. Another four groups were named Resinomer group, Ketac-Silver group, Miracle Mix group, and Tytin group by type of restorative material. Tunnel cavity preparation was done with ' 1/2, 2, and 4 round burs in sequence. Initial access to proximal surface was made through an occlusal access preparation started at least 2mm from the marginal ridge, and the proximal opening was formed about 2.5mm below the marginal ridge. After restoration and thermocycling, marginal ridge strength was measured using a universal testing machine. The results were as follows: 1. The Young's modulus of $Tytin^{(R)}$ was 63.95 GPa, followed by $Ketac-Silver^{(R)}$ 27.60 GPa, $Miracle-mix^{(R)}$ 18.48 GPa, and $Resinomer^{(R)}$ 10.74 GPa showing significant differences between the groups(P<0.05). The bulk modulus of the materials showed the same order as Young's modulus. The value of $Tytin^{(R)}$ showed 59.57 GPa indicating that it will deform less than other materials under the same stress. It was followed by $Ketac-Silver^{(R)}$ 23.57 GPa, Miracle $Mix^{(R)}$ 12.50 GPa, and $Resinomer^{(R)}$ 11.60 GPa. 2. The Resinomer group had a shear-bond strength of 7.41 MPa which was significantly higher than those of the Ketac-Silver group (1.80 MPa) and the Miracle Mix group (2.84 MPa) (P<0.01). All the specimens of Tytin group detatched from the dentin surface during thermocycling. 3. The mean marginal ridge strength of the Unrestored group(46.14 kgf) was significantly lower than that of the Control group (84.24 kgf) (P<0.01). The marginal ridge strength of teeth restored by the tunnel technique was, in order, Ketac-Silver group 74.06 kgf, Miracle Mix group 73.36 kgf, Resinomer group 63.47 kgf, and Tytin group 58.76 kgf. The Ketac-Silver, Miracle Mix, and Resinomer groups showed no significant difference with the Control group (P>0.05), but the Tytin group showed significantly lower strength compared to the Control group(P<0.05). The results showed that the marginal ridge strength of the teeth restored by the tunnel technique was not significantly lower than that of sound teeth. They also demonstrated that the bonding strength of the restorative material to the tooth surface should be high and the modulus of elasticity should not be lower than that of the tooth in order to restore the marginal ridge strength to its natural condition.
C57BL/6 마우스에서 자외선 B(UV-B) 조사에 의한 표피 멜라닌세포의 변화에 대한 헤모힘의 효과를 관찰하였다. 마우스에 UV-B를 매일 $80\;mJ{\cdot}cm^{-2}$ ($0.5\;mW{\cdot}sec^{-1}$)씩 7일간 조사하고 헤모힘을 UV 조사 전 또는 조사 후에 복강내주사, 경구투여 또는 피부에 도포하여 멜라닌세포 형성 억제효과 및 형성된 멜라닌세포에 대한 미백효과를 dihydroxyphenylalanine (DOPA) 염색으로 관찰하였다. 마우스의 귀등쪽 표피를 분리하여 관찰한바, 정상대조군에서는 $mm^2$당 13~15개의 멜라닌세포가 관찰되었다. 멜라닌세포 형성 억제 실험에서는 평균치를 기준으로 복강내주사군에서 44.9%, 경구투여군에서는 35.6%의 억제효과를 보였고, 피부도포군에서는 30% 이상의 유의성 있는 억제 효과가 관찰되었다. 형성된 멜라닌세포의 감소 효과 실험에서는 평균치를 기준으로 복강내주사군의 경우 3주 및 6주에 각각 18.3%, 12.5%의 감소 효과가 관찰되었고, 경구투여군에서는 3주 및 6주에 각각 16.9%, 20.4%의 감소 효과가 관찰되었으며, 피부도포군의 경우 3주에 32.0%, 6주에 31.2%의 감소 효과를 보였다. 이상의 결과는 헤모힘이 UV에 의한 멜라닌세포 형성 억제제 및 미백제로서의 적용 가능성을 제시하였다. 구성 단미생약, 유효성분, 멜라닌세포 형성 억제 및 형성된 세포의 감소 촉진에 관여하는 작용 기전에 대한 추가 연구가 필요하다.
하지 정맥류 질환 환자를 대상으로 하지 정맥조영술 MDCT 검사에서 환자의 피폭선량을 최소화 하면서 최적의 진단영상을 묘출하기 위해 고정 관전류 기법과 Z-축 자동 관전류 변동 제어를 이용하여 CTDIvol(CT dose index volume), DLP(dose length product) 산출을 통한 영상의 노이즈를 측정하여 비교하였다. Monte Carlo simulation으로 200, 250, 300 mA에서 CTDIw, CTDIvol, DLP를 계산하여 고정 관전류 기법과 비교하였다. 고정 관전류 기법의 대상 환자는 50명(평균 나이, 46세; 연령 범위, 35-61세)으로 남성30명, 여성 20명 이었고, 평균 체중은 62.4 kg 이었다. Z-축 자동 관전류 변동 제어 대상 환자는 50명(평균 나이, 43세; 범위, 37-63세)으로 남성25명, 여성 25명 이었고 평균 체중은 60.1 kg 이었다. 고정 관전류 기법은 200, 250, 300 mA를 기준으로 하고, Z-축 자동 관전류 변동 제어는 노이즈 지수 10, 11, 12 HU에서 관전류 $70{\sim}450\;mA$ 범위 내에서 자동으로 선택하였다. 고정 관전류 기법과 Monte Carlo simulation 비교에서 200 mA에서의 CTDIvol은 차이가 없었으나, 250 mA, 300 mA 에서의 Monte Carlo simulation는 높았고, DLP는 모든 관전류에서 Monte Carlo simulation이 높게 측정 되었다. 노이즈는 고정 관전류에서 최소 $9.8{\pm}0.9\;HU$, 최대 $12.5{\pm}0.7\;HU$ 이었고, Z-축 자동 관전류 변동 제어에서는 최소 $11.3{\pm}0.8\;HU$, 최대 $12.9{\pm}0.7\;HU$이었다. Z-축 자동 관전류 변동 제어에서 노이즈 지수가 증가하면 CTDIvol과 DLP가 감소하였으나 노이즈는 증가하였다. 생식부위를 포함하는 하지 정맥조영술에서 Z-축 자동 관전류 변동 제어 방법이 고정 관전류 기법에 비해 선량을 감소하는 효과가 있었다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.