• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.7
• /
• pp.37-43
• /
• 2008

In this paper, the dependence of electrical characteristics of Silicon-$Al_2O_3$-Nitride-Oxide-Silicon (SANOS) memory cell transistors and program/erase (P/E) speed, reliability of memory device on interface trap between Si substrate and tunneling oxide and bulk trap in nitride layer were investigated using charge pumping method which has advantage of simple and versatile technique. We analyzed different SANOS memory devices that were fabricated by the identical processing in a single lot except the deposition method of the charge trapping layer, nitride. In the case of P/E speed, it was shown that P/E speed is slower in the SANOS cell transistors with larger capture cross section and interface trap density by charge blocking effect, which is confirmed by simulation results. However, the data retention characteristics show much less dependence on interface trap. The data retention was deteriorated as increasing P/E cycling number but not coincides with interface trap increasing tendency. This result once again confirmed that interface trap independence on data retention. And the result on different program method shows that HCI program method more degraded by locally trapping. So, we know as a result of experiment that analysis the SANOS Flash memory characteristic using charge pumping method reflect the device performance related to interface and bulk trap.

• Tuberculosis and Respiratory Diseases
• /
• v.42 no.4
• /
• pp.502-512
• /
• 1995

Background: One quarter to one third of patients with NSCLC present with primary tumors that although confined to the thorax are too extensive for surgical resection. Until resently standard treatment for these patients had been thoracic radiation, which produces tumor regression in most patients but few cures and dismal 5-year survival rate. The fact that death for most patients with stage III tumors is caused by distant metastases has promped a reevaluation of combined modality treatment approaches that include systemic chemotherapy. Therefore, we report the results observed in a study to evaluate the effect of multimodality treatment in locally advanced non-small cell lung cancer from 1/91 to 8/93 in CNUH. Method: We grouped the patients according to the treatment modalities and evaluated response rate, median survival and the effect of prognostic variables. Among 67 patients evaluated, twenty seven patients classified with group A, received cisplatin and etoposide containing combination chemotherapy alone, eighteen patients, classified with group B, received chemotherapy and radiotherapy, fifteen patients, group C, received neoadjuvant or adjuvant chemotherapy and surgery with/without radiation therapy, seven patients, group D, received only supportive care. Result: The major response rate for group A and B was 37% and 61% respectively. There was no statistically significant difference in response rate between A and B groups(p=0.97). The analysis of prognostic factors showed that differences of age, sex, pathology, blood type, smoking year, stage and ECOG performance did not related to improvement in survival. Median survival time was 8.6 months for group A, 13.4 months for group B, 19.2 months for group C, and 5.4 months for group D, respectively and there was statistically significant difference(p=0.003), suggesting that multimodality therapy was associated with signigicant improvement in survival. Subset survival analysis showed a significant therapeutic effect for earlier stage and good performance state(p=0.007, 0.009, respectively). A possible survival advantages were observed for major response groups. Conclusion: It was suggested that multimodality therapy for the management of patients who had stage III disease, has yielded good median survival and long survival for seleted patients. But, it is necessory to validate above result with further investigation in large scale and in prospective randomized trials.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.7
• /
• pp.662-669
• /
• 2017

Military rotary aircraft are heavily exposed to projectile environments due to their mission characteristics, and fires caused by fuel leaks after shooting are linked directly to the loss of human life. To improve the survivability of pilots and crews, the fuel tank in rotary aircraft must have gunfire resistance and anti-explosion characteristics. Gunfire resistance can be satisfied by applying a self-sealing cell to a fuel tank. Anti-explosion can be satisfied by reducing the oxygen concentration in an explosive area and suppressing the generation of combustible fuel vapor by minimizing the evaporation rate of the fuel by heat. A Korean utility helicopter applies anon-board inert gas generation system to meet the anti-explosion requirements for ballistic impact. The generator fills the fuel tank with an inert gas and reduces the oxygen concentration. This paper describes the overall development process of the OBIGGS developed in accordance with the localization process of weapon components. OBIGGS was developed/manufactured through domestic technology, and the performance was found to be equal to or better than that of the existing products through single performance tests and aircraft mounting tests.

• Journal of the Korean Ceramic Society
• /
• v.44 no.12
• /
• pp.740-746
• /
• 2007

The potential candidates for IT-SOFCs cathode materials, $Ba_{0.5}Sr_{0.5}Co_{0.8}Fe_{0.2}O_{3-{\delta}}$ (BSCF) and $La_{0.6}Ba_{0.4}Co_{0.2}Fe_{0.8}O_{3-{\delta}}$ (LBCF) powders, were synthesized by a EDTA-citrate combined method from $Sr(NO_3)_2$, $Ba(NO_3)_2$, $La(NO_3)_3{\cdot}6H_2O$, $Co(NO_3)_2{\cdot}6H_2O$, $Fe(NO_3)_3{\cdot}9H_2O$, citric acid and $EDTA-NH_3$. The cathode performance of symmetrical electrochemical cells consisting of BSCF-GDC or LBCF-GDC composite electrodes and a GDC electrolyte was investigated using by AC impedance spectroscopy at the temperature range of 500 to $700^{\circ}C$. It was found that a single phase perovskite could be successfully synthesized when the precursor is heated at $850^{\circ}C$ for 2 h. Due to thermal expansion mismatch between BSCF and GDC, the composite cathodes with lower GDC content than 45 wt% were peeled off from the GDC electrolyte and their electrode polarization resistance was estimated to be high. The thermal expansion coefficient of BSCF-GDC composites was decreased with increasing the GDC content and the electrode peeling off did not occur in BSCF-45 and 55 wt% GDC composites. BSCF-45 wt% GDC composite electrode showed the lowest area specific resistances (ASR) of 0.15 and $0.04{\Omega}{\cdot}cm^2$ at 600 and $700^{\circ}C$, respectively. On the other hand, LBCF-GDC composite cathodes showed higher ASR than the BSCF-45 and 55 wt% GDC and their cathode performance were decreased with the GDC content.

• Journal of the Korean Ceramic Society
• /
• v.43 no.6 s.289
• /
• pp.369-375
• /
• 2006

[ $(Ba_{0.5}Sr_{0.5})_{0.99}Co_{x}Fe_{1-x}O_{3-{\delta}}$ ] [x=0.8, 0.2](BSCF) powders were synthesized by a Glycine-Nitrate Process (GNP) and the electrochemical performance of the BSCF cathode on a scandia stabilized zirconia, $[(Sc_{2}O_3)_{0.11}(ZrO_2)_{0.89}]-1Al_{2}O_3$ was investigated. In order to prevent unfavorable solid-state reactions between the cathode and zirconia electrolyte, a GDC ($Gd_{0.1}Ce_{0.9}O_{2-{delta}}$) buffer layer was applied on ScSZ. The BSCF (x = 0.8) cathode formed on GDC(Buffer)/ScSZ(Disk) showed poor electrochemical property, because the BSCF cathode layer peeled off after the heat-treatment. On the other hand, there were no delamination or peel off between the BSCF and GDC buffer layer, and the BSCF (x = 0.2) cathode exhibited fairly good electrochemical performances. It was considered that the observed phenomenon was associated with the thermal expansion mismatch between the cathode and buffer layer. The ohmic resistance of the double layer cathode was slightly lower than that of the single layer BSCF cathode due to the incorporation of platinum particle into the BSCF second layer.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.5
• /
• pp.2051-2055
• /
• 2014

Background: To evaluate the performance of Siriraj liquid-based cytology (LBC) for cervical neoplasia screening after increasing use of this technology. Materials and Methods: Cytological reports of 103,057 Siriraj-LBC specimens obtained in 2007-2009 were compared with those of 23,676 specimens obtained in 2006. Results: Comparing with the year 2006, the 2007-2009 patients were slightly older ($43.4{\pm}12.yr$ vs $42.7{\pm}12.2yr$, p <0.001), and their specimens had much lower proportion of unsatisfactory slides (OR=0.06, 95%CI 0.04-0.09) with comparable detection rates (3.96% vs 3.70%, p=0.052) but different proportions of various cytological abnormalities (p<0.001). The 2007-2009 Siriraj-LBC had a negative predictive value (NPV) for cervical intraepithelial neoplasia 2+ (CIN2+) of 97.6% and an overall positive predictive value (PPV) of 43.9%. The PPV for CIN2+ varied with types of abnormal cytology, from 13.7% to 93.8% in atypical squamous cells of undetermined significance (ASCUS), low-grade squamous intraepithelial lesion (LSIL), atypical squamous cells cannot exclude HSIL (ASC-H), high-grade squamous intraepithelial lesion (HSIL), atypical glandular cells (AGC), to squamous cell carcinoma (SCC), respectively. The PPVs for CIN2+ in ASCUS and LSIL were comparable, but the PPV for CIN1 was higher for LSIL than for ASCUS (41.63% vs 16.32%). Conclusions: Siriraj-LBC has demonstrated a stable detection rate and NPV for CIN2+ of >95% since the first year of use. The comparable PPVs for CIN2+ of ASCUS and LSIL suggests that these two conditions may undergo similar management; other cytological abnormalities need immediate evaluation.

• The KIPS Transactions:PartC
• /
• v.11C no.1
• /
• pp.141-148
• /
• 2004

Recently, the demand of broadband communications such as high-speed internet, HDTV, 3D-HDTV and ATM backbone network has been increased drastically. For transmitting the broad-bandwidth data using wireless network, it is needed to use ka-band frequency. However, the use of this ka-band frequency is seriously affected to the received data performance by rain fading and atmospheric propagation loss at the Ka-band satellite communication link. So, we need adaptive MODEM to endure the degraded performance by channel environment. In this paper, we will present the structure and design of the 155Mbps adaptive Modem adaptively compensated against channel environment. In order to compensate the rain attenuation over the ka-band wireless channel link, the adaptive coding schemes with variable coding rates and the multiple modulation schemes such as trellis coded 8-PSK, QPSK, and BPSK are adopted. And the blind demodulation scheme is proposed to demodulate without Information of modulation mode at the multi-mode demodulator, and the fast phase ambiguity resolving scheme is proposed. The design and simulation results of adaptive Modem by SPW model are provided. This 155Mbps adaptive MODEM was designed and implemented by single ASIC chip with the $0.25\mu{m}$ CMOS standard cell technology and 950 thousand gates.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.12 no.3
• /
• pp.183-196
• /
• 2010

Increasing human activity due to rapid economic growth and land use change alters the patterns of the Asian monsoon, which is key to crop yields in Asia. In this study, we tested the performance of regional climate model (RegCM3) by simulating important components of Indian summer monsoon, including land-ocean contrast, low level jet (LLJ), Tibetan high and upper level Easterly Jet. Three contrasting rain years (1994: excess year, 2001: normal year, 2002: deficient year) were selected and RegCM3 was integrated at 60 km horizontal resolution from April 1 to October 1 each year. The simulated fields of circulations and precipitation were validated against the observation from the NCEP/NCAR reanalysis products and Global Precipitation Climatology Centre (GPCC), respectively. The important results of RegCM3 simulations are (a) LLJ was slightly stronger and split into two branches during excess rain year over the Arabian Sea while there was no splitting during normal and deficient rain years, (b) huge anticyclone with single cell was noted during excess rain year while weak and broken into two cells in deficient rain year, (c) the simulated spatial distribution of precipitation was comparable to the corresponding observed precipitation of GPCC over large parts of India, and (d) the sensitivity experiment using NIMBUS-7 SMMR snow data indicated that precipitation was reduced mainly over the northeast and south Peninsular India with the introduction of 0.1 m of snow over the Tibetan region in April.

• Applied Chemistry for Engineering
• /
• v.29 no.6
• /
• pp.696-702
• /
• 2018

Recently, the current thermal battery technology needs new materials for electrodes in the power and energy density to meet various space and defense requirements. In this paper, to replace the pellet type Li(Si) anode having limitations of the formability and capacity, electrochemical properties of the lithium anode with high density for thermal batteries were investigated. The lithium anode (Li 17, 15, 13 wt%) was fabricated by mixing the molten lithium and iron powder used as a binder to hold the molten lithium at $500^{\circ}C$. The single cell with 13 wt% lithium showed a stable performance. The 2.06 V (OCV) of the lithium anode was significantly improved compared to 1.93 V (OCV) of the Li(Si) anode. Specific capacities during the first phase of the lithium anode and Li(Si) were 1,632 and $1,181As{\cdot}g^{-1}$, respectively. As a result of the thermal battery performance test at both room and high temperatures, the voltage and operating time of lithium anode thermal batteries were superior to those of using Li(Si) anode thermal batteries. The power and energy densities of Li anode thermal batteries were also remarkably improved.

• Transactions of the Korean hydrogen and new energy society
• /
• v.32 no.6
• /
• pp.442-454
• /
• 2021

The porous transport layer (PTL) is essential to effectively remove oxygen and hydrogen gas from the electrode surface at high current density operation conditions. In this study, the effect of PTL with different characteristics such as pore size, pore gradient, interfacial coating was investigated by multi-layered sintered mesh. A water electrolysis single cell of active area of the 34.56 cm² was constructed, and IV performance and impedance analysis were conducted in the range of 0 to 2.0 A/cm². It was confirmed that the multi-layered sintered mesh PTL, which have an average pore size of 25 to 57 ㎛ and a larger pore gradient, removed bubbles effectively and thus seemed to improve IV performance. Also, it was confirmed that the catalytic metals such as Ni, NiMo coating on the PTL reduced activation overpotential, but increased mass transport overpotential.