• 한국군사과학기술학회지
• /
• 제13권6호
• /
• pp.1139-1146
• /
• 2010

Simulated target generators are used to evaluate the various radar performance. Using the radar parameters such as target range(time delay), doppler frequency, target RCS, simulated target generator can be developed. Especially moving targets are simulated by control time delay and update target signal intensive for target range. Base on this concepts, in this paper, simulated target generators are designed and developed for X-band Radar performance test. Developed equipment is evaluated its performance and then tested with X-band Radar. This paper presents these design, development, and test results of developed target generator.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 C
• /
• pp.1759-1761
• /
• 2003

Recently, the development of diagnosis technique with high confidence is important on power equipment, for this reason is use for measurement and analysis of PD with prior appearance of insulation breakdown In this paper, we presents the analysis of trouble signal to use ${\Phi}$-Q method which display 2D and 3D Equipment of simulation has made independently DS for 170kV GIS of one phase with same on field. The detected signal through the sensor of Induction and Acoustic Emission is classified to use characteristic neural network algorithm and then it is analysis.

• 한국인터넷방송통신학회논문지
• /
• 제22권3호
• /
• pp.57-62
• /
• 2022

최근 추적 레이더는 다양한 환경에서 표적을 획득하고 추적할 수 있는 새로운 알고리듬을 개발하기 위한 연구를 지속하고 있다. 일반적으로 새로운 운용 알고리듬 개발을 위해 실제 표적 및 환경과 유사한 모델링을 사용하지만, 실제 환경을 모델링하는데 한계가 있다. 본 논문에서는 밀리미터파를 사용하는 추적레이더가 표적을 획득하고 추적하는데 필요한 새로운 운용 알고리듬을 효율적으로 개발하기 위해 RAW 데이터 저장 장비를 개발하였다. RAW 데이터 저장 장비는 밀리미터파를 사용하는 추적레이더의 신호처리장치가 8채널에서 OOOMSPS로 출력하는 RAW 데이터를 실시간으로 저장할 수 있도록 설계하였다. RAW 데이터 저장 장비는 데이터 획득 장비, 데이터 저장 장비로 구성된다. 데이터 획득장비는 고속통신 인터페이스가 가능한 상용 Xilinx KCU 105 Evaluation KIT를 활용하여 구현하였고, 데이터 저장장비는 상용 Xilinx KCU 105 Evaluation KIT 호환이 가능한 컴퓨터를 적용하여 구현하였다. 본 논문에서 구현한 RAW 데이터 저장 장비는 밀리미터파 추적레이더의 신호처리장치와 반복 연동시험을 통해 성능을 검증하였다.

• 한국항행학회논문지
• /
• 제22권2호
• /
• pp.64-69
• /
• 2018

비행체의 탑재장비의 야전정비를 위한 자동점검장비는 특수목적을 위한 소수의 비행체를 운용할 경우에는 통합 설계하는 것이 효율적이다. 통합형 자동점검장비는 공통적으로 사용되는 인터페이스를 식별하여 각 점검대상장비 별 점검에 사용할 수 있도록 분기하거나 경로를 생성해주는 방식이 사용된다. 분기 및 경로 생성 시 RTD, TC 및 아날로그 전압과 같은 고정밀 신호는 신호분기 및 연결 시 도선저항에 의한 측정 오류가 발생할 수 있다. 이러한 도선저항에 의한 측정 오류는 점검대상장비 설계 시 많은 제약을 가져오게 된다. 본 논문에서는 아날로그 전압 및 고정밀 신호의 측정오류를 최소화 할 수 있는 통합형 자동점검장비의 고정밀 신호의 보정방법을 제시한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1318-1321
• /
• 2005

As recently raw water quality has been polluted as well as its quality has been remarkably varied according to season and region, the precise control of coagulant dosage is being keenly required in water treatment plants. The amount of coagulant is closely related to raw water quality such as turbidity, alkalinity, water temperature, pH, electrical conductivity, etc. Since the optimum quantity of chemicals is not yet finalized, so dosage rate must be decided by using jar test that takes one or two hours. Hereupon, the output signal of stream current and multi-regression on historical data were proposed to be applied to the coagulant dosing control. In consequence of applying the scheme to automatic determination of the dosage rate, it was testified that the determination of dosage rate was very effective in case it is performed as to real-time sensing of water quality and the output signal of stream current.

• Journal of Power Electronics
• /
• 제17권1호
• /
• pp.253-261
• /
• 2017

For a single-phase active power filter (APF), designing a more efficient algorithm to guarantee accurate and fast harmonics extraction with a lower computing cost is still a meaningful topic. The common idea still employs a IRPT-based Park transform, which was originally designed for 3-phase applications. Therefore, an additional virtual signal generation (VSG) link is necessary when it is used in the single-phase condition. This method, with virtual signal generation and transform, is obviously not the most efficient one. Regarding this problem, this paper proposes a novel harmonics extraction algorithm to further improve efficiency. The new algorithm is based on the principle of trigonometric orthogonal functions (TOF), and its mathematical principle and physical meaning are introduced in detail. Its implementation and superiority in terms of computation efficiency are analyzed by comparing it with conventional methods. Finally, its effectiveness is well validated through detailed simulations and laboratory experiments.

• 한국소음진동공학회논문집
• /
• 제15권3호
• /
• pp.313-319
• /
• 2005

Instruction and prevention of the safety for a fire have been performed continuously by nation. However, the accident due to a fire is not decreasing and causes a serious calamity to people. It is at the initial stage of fire burning that the most effective way to reduce damage is to evacuate and fight a fire. When a fire burns, the equipments reporting to other person or organization concerned are called 'acoustic reporting equipment'. Among those equipments reporting to person, 'a fire bell' is the easiest equipment to approach. Observing the behaviors of people when a fire burning, some are in a quiet indoor, some in a room with other people, some in a square with many people and some in indoor filled with smoke etc. This study aims to find out an acoustic reporting signal appropriate for visual information. For the experiments, visual-auditory experiments were performed through reporting signals and visual informations with several situations that is able to be faced at when a fire burns.

• Journal of Power Electronics
• /
• 제12권3호
• /
• pp.410-417
• /
• 2012

In this paper, a direct current control method based on a one-cycle controller (DCOCC) for double frequency buck converters (DF buck) is proposed. This control method can make the average current through the high frequency and low frequency inductors of a DF buck converter equal. This is similar to the average current control method. However, the design of the loop compensator is much easier when compared with the average current control. Since the average current though the high frequency and low frequency inductors is equivalent, the current stress of the high frequency switches and the switch losses are minimized. Therefore, the efficiency of the DF buck converter is improved. Firstly, the operation principle of DCOCC is described, then the small signal models of a one cycle controller and a DF buck converter are presented based on the state space average method. Eventually, a system block diagram of the DCOCC controlled DF buck is established and the compensator is designed. Finally, simulation and experiment results are given to verify the correction of the theory analysis.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2013년도 추계학술대회
• /
• pp.813-816
• /
• 2013

국립전파연구원에서는 방송통신설비의 운용자 및 이용자의 안전과 서비스 품질 향상을 위하여 위해 방지 및 오용, 고장 방지, 장애인에 대한 접근의 용이성, 단말장치간 상호호환성, 전송 품질과 망 접속 등에 관한 단말장치의 세부 기술기준을 정하여 고시하고 있으며, 방송통신설비 기술의 발전과 서비스의 다변화에 빠르게 대응하기 위하여 단말장치 기술기준의 제 개정 연구를 추진하고 있다. 2013년 신규 융합 서비스 및 초고속 인터넷 서비스의 확산, 방송통신 서비스의 품질 제고를 위해 단말장치의 신호 전력 측정 대역의 확장과 의사회로의 대체 종단 사용 기준, 디지털 회선 접속 단말의 펄스 형상 기준 등에 대한 연구를 추진하고 이에 대한 타당성 검증을 위한 테스트베드 시험 결과를 제시하였다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2009년도 춘계학술대회 논문집
• /
• pp.281-284
• /
• 2009

In this paper, we review the effects of RF interference of medical equipment or other electric equipment which can emit radio frequency in the general hospitals environments which are in many cases being under the influence of various electromagnetic field. Using spectrum analysis method we found some devices could effect on the frequency of telemetry system. We also investigate the relationship between intensity of the signal and distance for the selected equipment used in hospitals.