• JSTS:Journal of Semiconductor Technology and Science
• /
• v.8 no.3
• /
• pp.264-275
• /
• 2008

Electron mobility has been investigated theoretically in undoped double-gate (DG) MOSFETs of different channel architectures: a relaxed-Si DG SOI, a strained-Si (sSi) DG SSOI (strained-Si-on-insulator, containing no SiGe layer), and a strained-Si DG SGOI (strained-Si-on-SiGe-on-insulator, containing a SiGe layer) at 300K. Electron mobility in the DG SSOI device exhibits high enhancement relative to the DG SOI. In the DG SGOI devices the mobility is strongly suppressed by the confinement of electrons in much narrower strained-Si layers, as well as by the alloy scattering within the SiGe layer. As a consequence, in the DG SGOI devices with thinnest strained-Si layers the electron mobility may drop below the level of the relaxed DG SOI and the mobility enhancement expected from the strained-Si devices may be lost.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.5 no.2
• /
• pp.136-147
• /
• 2005

A theoretical design evaluation based on a hydrodynamic transport simulation of strained Si-SiGe on insulator (SSOI) type nMOSFETs is reported. Although, the net performance improvement is quite limited by the short channel effects, simulation results clearly show that the strained Si-SiGe type nMOSFETs are well-suited for gate lengths down to 20 nm. Simulation results show that the improvement in the transconductance with decreasing gate length is limited by the long-range Coulomb scattering. An influence of lateral and vertical diffusion of shallow dopants in the source/drain extension regions on the device performance (i.e., threshold voltage shift, subthreshold slope, current drivability and transconductance) is quantitatively assessed. An optimum layer thickness ($t_{si}$ of 5 and $t_{sg}$ of 10 nm) with shallow Junction depth (5-10 nm) and controlled lateral diffusion with steep doping gradient is needed to realize the sub-50 nm gate strained Si-SiGe type nMOSFETs.

• Proceedings of the IEEK Conference
• /
• 2003.07b
• /
• pp.1065-1068
• /
• 2003

For the first time, high quality ultra-thin strained Si/SiGe on Insulator (SGOI) substrate with total SGOI thickness( $T_{Si}$ + $T_{SiGe}$) of 13 nm is developed to combine the device benefits of strained silicon and SOI. In the case of 6- 10 nm-thick top silicon, 100-110 % $I_{d,sat}$ and electron mobility increase are shown in long channel nFET devices. However, 20-30% reduction of $I_{d,sat}$ and electron mobility are observed with 3 nm top silicon for the same long channel device. These results clearly show that the FETs operates with higher performance due to the strain enhancement from the insertion of SiGe layer between the top silicon layer and the buried oxide(BOX) layer. The performance degradation of the extremely thin( 3 nm ) top Si device can be attributed to the scattering of the majority carriers at the interfaces.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.21-22
• /
• 2005

Partially-depleted Silicon on insulator metal-oxide-semiconductor field- effect transistors (PD-SOI MOSFETs) with Silicon-germanium (SiGe) layer is investigated. This structure uses SiGe layer to reduce the kink effect in the floating body region near the bottom channel/buried oxide interface. Among many design parameters influencing the performance of the device, Ge composition is presented most predominant effects, simulation results show that kink effect is reduced with increase the Ge composition. Because the bandgap of SiGe layer is reduced at higher Ge composition, the hole current between body and SiGe layer is enhanced.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.99-100
• /
• 2009

SGOI 1T-DRAM cells with various Ge mole fractions were fabricated and compared to the SOI 1T-DRAM cell. SGOI 1T-DRAM cells have a higher leakage current than SOI 1T-DRAM cell at subthreshold region. The leakage current due to crystalline defects and interface states at Si/SiGe increased with Ge mole. This phenomenon causes sensing margin and the retention time of SGOI 1T-DRAMs decreased with increase of Ge mole fraction.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.3 no.3
• /
• pp.153-166
• /
• 2003

Failure analysis is fundamental to the design and development methodology of electrostatic discharge (ESD) devices and ESD robust circuits. The role of failure analysis (FA) in the models, methodology, band mechanisms evaluation for improving ESD robustness of semiconductor products in CMOS, silicon-on-insulator (SOI) and silicon germanium (SiGe) technologies will be reviewed.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.99-100
• /
• 2006

Silicon-on-insulator(SOI) MOSFET with SiGe/Si heterostructure channel is an attractive device due to its potent use for relaxing several limits of CMOS scaling, as well as because of high electron and hole mobility and low power dissipation operation and compatibility with Si CMOS standard processing. SOI technology is known as a possible solution for the problems of premature drain breakdown, hot carrier effects, and threshold voltage roll-off issues in sub-deca nano-scale devices. For the forthcoming generations, the combination of SiGe heterostructures and SOI can be the optimum structure, so that we have developed SOI n-MOSFETs with SiGe/Si heterostructure channel grown by reduced pressure chemical vapor deposition. The SOI n-MOSFETs with a SiGe/Si heterostructure are presented and their DC characteristics are discussed in terms of device structure and fabrication technology.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.5
• /
• pp.399-402
• /
• 2007

The effects of heat treatment on the electrical properties of strained-Si/SiGe-on-insulator (SGOI) devices were examined. We proposed the optimized heat treatment processes for improving the back interfacial electrical properties in SGOI-MOSFET. By applying the additional pre-RTA (rapid thermal annealing) before gate oxidation step and the post-RTA after source/drain dopant activation step, the electrical properties of strained-Si channel on $Si_{1-x}Ge_x$ layer were greatly improved, which resulting the improvement of the driving current, transconductance, and leakage current of SGOI-MOSFET.

• Journal of the Korean Vacuum Society
• /
• v.17 no.2
• /
• pp.156-159
• /
• 2008

The electrical characteristic of SiGe-on-SOI (SGOI) wafer with different Ge concentration were evaluated by pseudo-MOSFET. Epitaxial SiGe layers was grown directly on top of SOI with Ge concentrations of 16.2, 29.7, 34.3 and 56.5 at.%. As Ge concentration increased, leakage current increased and threshold voltage shifted from 3 V to 7 V in nMOSFET, from -7 V to -6 V in pMOSFET. The interface states between buried oxide and top of Si was significantly increased by the rapid thermal annealing (RTA) process, and so the electrical characteristic of SGOI wafer degraded. On the other hand, additional post RTA　annealing (PRA) showed that it was effective in decreasing the interface states generated by RTA processes and the electrical characteristic of SGOI wafer enhanced higher than initial state.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.202-202
• /
• 2010

최근 반도체 소자의 미세화에 따라, 단채널 효과에 의한 누설전류 및 소비전력증가 등이 문제가 되고 있다. DRAM의 경우, 캐패시터 영역의 축소문제가 소자집적화를 방해하는 요소로 작용하고 있다. 1T-DRAM은 기존의 DRAM과 달리 캐패시터 영역을 없애고 상부실리콘의 중성영역에 전하를 저장함으로써 소자집적화에 구조적인 이점을 갖는다. 또한 silicon-on-insulator (SOI) 기판을 이용할 경우, 뛰어난 전기적 절연 특성과 기생 정전용량의 감소, 소자의 저전력화를 실현할 수 있다. 본 연구에서는 silicon-germanium-on-insulator (SGOI) 기판을 이용한 1T-DRAM의 열처리온도에 따른 특성 변화를 평가하였다. 기존의 SOI 기판을 이용한 1T-DRAM과 달리, SGOI 기판을 사용할 경우, strained-Si 층과 relaxed-SiGe 층간의 격자상수 차에 의한 캐리어 이동도의 증가효과를 기대할 수 있다. 하지만 열처리 시, SiGe층의 Ge 확산으로 인해 상부실리콘 및 SiGe 층의 두께를 변화시켜, 소자의 특성에 영향을 줄 수 있다. 열처리는 급속 열처리 공정을 통해 $850^{\circ}C$와 $1000^{\circ}C$로 나누어 30초 동안 N2/O2 분위기에서 진행하였다. 그리고 Programming/Erasing (P/E)에 따라 달라지는 전류의 차를 감지하여 제작된 1T-DRAM의 메모리 특성을 평가하였다.