• Progress in Superconductivity
• /
• 제3권1호
• /
• pp.36-40
• /
• 2001

We have studied vortex dynamics in$ Bi_2$$Sr_2$$CaCu_2$O$_{8}$single crystals of unirradiated and irradiated samples by using 100 $\times$ $100\mu\textrm{m}^2$Hall sensor. Doses equivalent magnetic fields are 20 G, 100 G and 1 kG. In the magnetization measurement, a second magnetization peak (SMP) was observed in unirradiated, 20 G dose and 100 G dose samples in contrast to 1 kG dose sample. In the unirradiated sample, the SMP was observed in the range of 18 K ~ 35 K and the amplitude of the SMP decreased with increasing temperature. With increase of the irradiation dose, temperature region and sharpness of the SMP were reduced. In the magnetic relaxation measurement, we observed that the normalized relaxation rate S decreased with increasing the irradiation dose. Our results suggest that the vortex dynamics is not greatly affected by low-density columnar defects.s.

• 열처리공학회지
• /
• 제24권1호
• /
• pp.31-36
• /
• 2011

$TiO_2$ films were deposited on a glass substrate with RF magnetron sputtering and then surface of $TiO_2$ films were electron beam irradiated in a vacuum condition to investigate the effect of electron bombardment on the thin film crystallization, surface roughness and gas sensitivity for hydrogen. $TiO_2$ films that electron beam irradiated at 450eV were amorphous phase, while the films irradiated at 900 eV show the anatase (101) diffraction peak in XRD pattern. AFM measurements show that the roughness is depend on the electron irradiation energy. As increase the hydrogen gas concentration and operation temperature, the gas sensitivity of $TiO_2$ and $TiO_2$/ZnO films is increased proportionally and $TiO_2$ films that electron beam irradiated at 900 eV show the higher sensitivity than the films were irradiated at 450eV. From the XRD pattern and AFM observation, it is supposed that the crystallization and rough surface promote the hydrogen gas sensitivity of $TiO_2$ films.

• 한국응용과학기술학회지
• /
• 제16권4호
• /
• pp.273-279
• /
• 1999

In order to study a reversible photoisomerization of disperse red l(DR 1) attached on natural polymers, cellulose acetate containing DR l(DR 1/CA adduct) was prepared, and the changes of UV/VIS spectra of its solution(benzene, DMAc). thick film, and LB film were investigated by alternate irradiation with two different wave length lights. DR 1/CA adduct was prepared through tosylation of partially hydrolyzed cellulose acetate followed by reaction with DR 1 at $100^{\circ}C$ in pyridine. From the UV/VIS spectra of DR 1/CA adduct dissolved in DMAc solvent including phosphoglyceride before and after irradiation at 360nm and 45Onm, we found out the changes of UV/VIS spectra were reversible. In addition, the change of UV/VIS spectra of this adduct solution was strongly depended on the sorts of solvents and temperature. As the temperature was increased, UV/VIS spectra of this adduct solution in DMF showed blue shift. These results provided this solution could be applied to a temperature sensor. In the thick film case, we also obtained similar results with solution case. LB monolayer and trilayer from DR 1/CA adduct was obtained by scattering the solution including phosphoglyceride on water surface at the surface pressure of 8mN/m. After irradiation on that LB monolayer and trilayer, the reversible photoisomerization was also detected. From these results we concluded DR 1/CA adduct was suitable for the application to data storage and optical switch, etc.

• 센서학회지
• /
• 제32권5호
• /
• pp.320-327
• /
• 2023

In this study, an FPGA-based sealer inspection system was developed to inspect the sealer applied to install vehicle glass on a car body. The sealer is a liquid or paste-like material that promotes adhesion such as sealing and waterproofing for mounting and assembling vehicle parts to a car body. The system installed in the existing vehicle design parts line does not detect the sealer in the glass rotation section and takes a long time to process. This study developed a line laser camera sensor and an FPGA vision signal processing module to solve this problem. The line laser camera sensor was developed such that the resolution and speed of the camera for data acquisition could be modified according to the irradiation angle of the laser. Furthermore, it was developed considering the mountability of the entire system to prevent interference with the sealer ejection machine. In addition, a vision signal processing module was developed using the Zynq-7020 FPGA chip to improve the processing speed of the algorithm that converted the profile to the sealer shape image acquired from a 2D camera and calculated the width and height of the sealer using the converted profile. The performance of the developed sealer application inspection system was verified by establishing an experimental environment identical to that of an actual automobile production line. The experimental results confirmed the performance of the sealer application inspection at a level that satisfied the requirements of automotive field standards.

• Applied Microscopy
• /
• 제45권3호
• /
• pp.107-114
• /
• 2015

Two-dimensional (2D) materials containing hole defects are a promising substitute for conventional nanopore membranes like silicon nitride. Hole defects on 2D materials, as atomically thin nanopores, have been used in nanopore devices, such as DNA sensor, gas sensor and purifier at lab-scale. For practical applications of 2D materials to nanopore devices, researches on characteristics of hole defects on graphene, hexagonal boron nitride and molybdenum disulfide have been conducted precisely using transmission electron microscope. Here, we summarized formation, features, structural preference and stability of hole defects on 2D materials with atomic-resolution transmission electron microscope images and theoretical calculations, emphasizing the future challenges in controlling the edge structures and stabilization of hole defects. Exploring the properties at the local structure of hole defects through in situ experiments is also the important issue for the fabrication of realistic 2D nanopore devices.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2017년도 추계학술대회
• /
• pp.711-713
• /
• 2017

본 논문에서는 800nm급 펨토초 레이저와 위상마스크를 이용하여 게르마늄이 첨가된 일반 광섬유(Corning SMF-28)에 FBG 센서를 가공하였다. 제작된 FBG 센서는 누적방사선 100 kGy급 감마선에 조사하여 방사선 영향을 평가하였다. fs-FBG-2 센서는 방사선 조사 중에 불완전한 광특성을 보였지만, fs-FBG-1 센서는 누적선량 100kGy에서 Bragg 파장변화가 10pm 이하로 나타나 뛰어난 내방사선 특성을 보였다.

• 대한기계학회논문집B
• /
• 제38권10호
• /
• pp.853-858
• /
• 2014

본 연구는 미세유동칩을 이용하여 당의 일종인 cyclodextrine(CD)과 알루미늄 이온 검출이 가능한 polydiacetylene(PDA)이 집적된 미세섬유를 제작하는 방법을 제안한다. PDA는 공액 고분자의 일종으로 외부 자극에 대해 blue-to-red 색 전이 및 형광이 발현되며 원료가 되는 PCDA의 head group에 따라 자극에 대한 감도가 달라지는 매력적인 특성을 가지고 있다. 따라서, 이온간 교차결합으로 야기되는 하이드로젤 형성 메커니즘과 미세유동칩 내 3차원 유체집속효과를 활용하여 PCDA-EDEA 기반의 diacetylene(DA) 단량체가 집적된 센서 섬유를 제작하였다. 섬유 내 DA 단량체는 UV에 의해 파란색의 PDA로 상 전이가 일어나며 CD나 알루미늄 이온에 반응하여 붉은색으로의 색 전이 및 붉은 형광이 발현되는 특성을 보였다. 또한 형광세기는 CD와 금속 이온의 농도에 따라 변화하는 특성을 나타내었다. 이는 미세섬유가 건조된 경우에도 동일하게 관찰되었다.

• 한국재료학회지
• /
• 제19권4호
• /
• pp.192-197
• /
• 2009

Carbon nanotubes (CNT) were used as a catalyst support where catalytically active Pd and Pt metal particles decorated the outside of the external CNT walls. In this study, Pd and Pt nanoparticles supported on $HNO_3$-treated CNT were prepared by microwave-assisted heating of the polyol process using $PdCl_2$ and $H_2PtCl_6{\codt}6H_2O$ precursors, respectively, and were then characterized by SEM, TEM, and Raman. Raman spectroscopy showed that the acid treated CNT had a higher intensity ratio of $I_D/I_G$ compared to that of non-treated CNT, indicating the formation of defects or functional groups on CNT after chemical oxidation. Microwave irradiation for total two minutes resulted in the formation of Pd and Pt nanoparticles on the acid treated CNT. The sizes of Pd and Pt nanoparticles were found to be less than 10 nm and 3 nm, respectively. Furthermore, the $SnO_2$ films doped with CNT decorated by Pd and Pt nanoparticles were prepared, and then the $NO_2$ gas response of these sensor films was evaluated under $1{\sim}5\;ppm$ $NO_2$ concentration at $200^{\circ}C$. It was found that the sensing property of the $SnO_2$ film sensor on $NO_2$ gas was greatly improved by the addition of CNT-supported Pd and Pt nanoparticles.

• Nano
• /
• 제13권12호
• /
• pp.1850147.1-1850147.14
• /
• 2018

In this work, water-soluble and blue-emitting carbon nanodots (CDs) were synthesized from apple peels for the first time via one-step hydrothermal method. The synthetic route is facile, green, economical and viable. The as-prepared CDs were characterized thoroughly by transmission electron microscopy (TEM), X-ray diffraction (XRD), Raman, Fourier transform infrared (FT-IR), X-ray photoelectron (XPS), fluorescence and UV-Vis absorption spectroscopy in terms of their morphology, surface functional groups and optical properties. The results show that these CDs possessed ultrasmall size, good dispersivity, and high tolerance to pH, ionic strength and continuous UV irradiation. Significantly, the CDs had fast and reversible response towards temperature, and the accurate linear relationship between fluorescence intensity and temperature was used to design a novel nanothermometer in a broad temperature range from 5 to $65^{\circ}C$ facilely. In addition, the fluorescence intensity of CDs was observed to be quenched immediately by Cr(VI) ions based on the inner filter effect. A low-cost Cr(VI) ions sensor was proposed employing CDs as fluorescent probe, and it displayed a wide linear range from 0.5 to $200{\mu}M$ with a detection limit of $0.73{\mu}M$. The practicability of the developed Cr(VI) sensor for real water sample assay was also validated with satisfactory recoveries.

• 한국산학기술학회논문지
• /
• 제14권2호
• /
• pp.828-834
• /
• 2013

본 논문에서는 태양광 집광 효율 향상을 위한 많은 연구 방법 중 하나로서 태양광을 효율적으로 집광할 수 있는 TMC(Tracker Motion Controller) 시스템 구성하여 발전효율의 향상성을 갖춘 집광형 태양광 발전시스템(CPV)과 실리콘을 이용한 PV 시스템으로 실험하였다. 태양추적 발전시스템에 사용되는 마이크로프로세서는 실시간으로 태양광의 고도와 위도 각을 계산한다. 또 한 센서로부터 값을 받아들이고, 태양의 현재 위치 값을 계산하여 모터를 제어하며 중앙제어 시스템과의 통신을 하기 때문에 적용 가능성에 대한 부담이 커지고 있다. 따라서 집광형 태양광 발전시스템에 적합한 프로그램 방식과 센서방식을 혼합한 하이브리드 방식의 알고리즘 통하여 ARM코어를 내장한 TMC에 구현하였으며, 구현된 TMC를 통하여 기존 PV시스템, CPV 시스템 대비하여 국내에서의 발전효율을 비교 분석하였다. 실험결과 기존의 센서방식을 이용한 집광형 태양광 발전 시스템에 GPS통신 값을 통해 프로그램 방식의 천문학 계산에 의하여 지평좌표계에서의 태양의 방위각과 고도각을 계산하는 하이브리드 태양위치추적 방식을 실험한 결과를 보면 맑고 일사량이 높은 날에는 큰 차이를 보이진 않았다. 그러나 흐리고 맑은 날 등 일사량이 없어 센서가 태양의 위치를 추적하지 못하고 멈춘 상태에서 일정 시간이 지난 후 태양이 센서의 사각지대에서 나타나면 센서의 오류가 생길 수 있는 기후변화에서는 오히려 센서방식보다 더 우수함을 확인할 수 있었다. 태양전지의 발전효율이 높아지고 생산발전 단가가 줄이는 부분에 대한 지속적인 연구, 더불어 기후의 변화에 따른 최적의 발전 능력을 가진 TMC를 적용한 고효율 집광형 시스템에 대한 연구가 지속적으로 필요할 것으로 기대된다.