• Journal of Ecology and Environment
• /
• v.48 no.3
• /
• pp.308-318
• /
• 2024

Background: Many plants compensate for the damage caused by herbivorous insects through tolerance responses. Besides directly causing plant tissue loss and seed production reduction, herbivory causes phenological changes in the host plant. However, little is known about the fitness costs of phenological changes caused by tolerance responses to herbivorous attacks. Results: The girdling beetle Phytoecia rufiventris caused a short-term decrease in the number of flowers of the host plant Erigeron annuus. However, accelerated growth restored the number of flowers, but after a 2-week delay. With an objective to examine whether the tolerance response with such a delay fully compensates the fitness, we experimentally reproduced a 2-week delay in germination under greenhouse and field settings. Under both conditions, intraspecific competition resulted in serious defects in the growth and reproduction of E. annuus plants which of germination was delayed. However, delayed germination (DG) resulted in better growth when competition and herbivory were eliminated from the field. Thus, we showed that the tolerance response to restore reproductive production does not fully compensate for the fitness loss caused by insect attack; rather, the delay in seed production in attacked plants leads to DG and subsequent inferiority in intraspecific competition. Conclusions: Our results imply that compensation for floral production after an herbivore attack does not fully restore offspring fitness in the presence of intraspecific competition and herbivory. Assessing the ecological consequences of defense traits in an appropriate layer of interaction is critical to interpreting adaptive values.

• Korean Journal of Materials Research
• /
• v.22 no.4
• /
• pp.180-184
• /
• 2012

Nanostructures of ZnO, such as nanowires, nanorods, nanorings, and nanobelts have been actively studied and applied in electronic or optical devices owing to the increased surface to volume ratio and quantum confinement that they provide. ZnO seed layer (about 40 nm thick) was deposited on Si(100) substrate by RF magnetron sputtering with power of 60 W for 5 min. ZnO nanorods were grown on ZnO seed layer/Si(100) substrate at $95^{\circ}C$ for 5 hr by hydrothermal method with concentrations of $Zn(NO_3)_2{\cdot}6H_2O$ [ZNH] and $(CH_2)_6N_4$ [HMT] precursors ranging from 0.02M to 0.1M. We observed the microstructure, crystal structure, and photoluminescence of the nanorods. The ZnO nanorods grew with hexahedron shape to the c-axis at (002), and increased their diameter and length with the increase of precursor concentration. In 0.06 M and 0.08 M precursors, the mean aspect ratio values of ZnO nanorods were 6.8 and 6.5; also, ZnO nanorods had good crystal quality. Near band edge emission (NBE) and a deep level emission (DLE) were observed in all ZnO nanorod samples. The highest peak of NBE and the lower DLE appeared in 0.06 M precursor; however, the highest peak of DLE and the lower peak of NBE appeared in the 0.02 M precursor. It is possible to explain these phenomena as results of the better crystal quality and homogeneous shape of the nanorods in the precursor solution of 0.06 M, and as resulting from the bed crystal quality and the formation of Zn vacancies in the nanorods due to the lack of $Zn^{++}$ in the 0.02 M precursor.

• Korean Journal of Environment and Ecology
• /
• v.28 no.1
• /
• pp.55-61
• /
• 2014

To examine the forest structure and variation of samara and leaf shape of Acer pictum subsp. mono (APSM), We investigated forest structure and samara angles and length, and leaf shape in three natural population of APSM in Yanggu-gun, Youngyang-gun and Kwangyang-si from June 2012 to October 2013. Mean importance percentage (MIP) of APSM is shown lower values in Yanggu 19.8%, in Youngyang 22.0%, and in Kwangyang 17.1%, respectively. In middle layer, importance percentage (IP) of APSM is shown lower values than that of Acer pseudosieboldianum and Carpinus cordata. In lower layer, importance percentage (IP) of APSM is shown lower values in Yanggu 1.8%, in Youngyang 1.9%, and in Kwangyang 0.0%, respectively. From these results, MIP of APSM in natural population might be reduced in future. Angles between wings and samara length are significantly different between districts. APSM with seven palmate vein leaf are distributed more frequently at Kwangyang and Youngyang than Yanggu. Percentages of biserrate leaf is shown in Yanggu 0.6%, in Youngyang 15.8%, and in Kwangyang 20.4%, respectively. These results implies genetic variation in natural APSM population and further studies on the genetic variation analysis in natuel population of APSM should be needed.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.47 no.6
• /
• pp.413-417
• /
• 2002

This study was conducted to determine $\beta$-amylase gene expression and degradation of starch granules in the endosperm near scutellar epithelium of rice cultivars under the submerged soil at hypoxia 18$^{\circ}C$, which is practically important condition for farmers in temperate regions. In case of cv. Janghyangdo, accumulation of $\beta$-amylase mRNA was detected in the aleurone layer on the ninth day after seeding. However that of cv. Suwon 287 and Norm 6 were not detected in the aleurone layer in submerged soil(hypoxia) at 18$^{\circ}C$. $\beta$-amylase of cv. Janghyangdo was synthesized de novo in aleurone cells not in the scutellar epithelium. Degradation of starch granules in the endosperm near scutellar epithelium of c.v. Janghyangdo and Ginbozu, which have a strong $\beta$-amylase activity, was greater than that of cv. Suwon 287 and Norm 6 with no $\beta$-amylase activity in submerged soil(hypoxia) at 18$^{\circ}C$. This result may indicate that $\beta$-amylase gene expression and degradation of starch granules of germinating rice seed are related to the emergence of rice under the submerged soil condition at low temperature.

• Journal of Nutrition and Health
• /
• v.10 no.2
• /
• pp.44-53
• /
• 1977

The Korean origin edible oil sterol part of the rape, sesame and perilla oil can be separated from the other constituents of the non-saponifiable fraction, by the thin layer chromatography on the preparative Plates. The composition of sterols have been determined by gas liquid chromatography and thin layer chromatographic anlysis. Two sterols, ${\beta}$-sitosterol and campesterol were present in all of the oils. And brassicasterol were found in rapeseed oil in addition to the two sterols that were common to all of the oils studied. It was noted that ${\beta}$-sitosterol was the major sterol in the Korean original edible oils. The results showed that contents of sterols were campesterol 24.31%, ${\beta}$-sitosterol 58.90% ana Brassicasterol 11.54%, and $\Delta^7$-sterol 5.25% by method of triangulation and campesterol 26.16%, ${\beta}$-sitosterol 57.50%, brassicasterol 11.70% and ${\Delta}^7$-sterol 4.64% by method of Planimetry of rape seed oil. By sesame seed oil sterol compositions were campesterol 20.35%, stigmasterol 9.15%, ${\beta}$-sitosterol 43.49%, ${\Delta}^7$-sterol 11.25% and others 15.76% by method of triangulation and campesterol 16.79%, stigmasterol 8.69%, ${\beta}$-sitosterol 44.58%, ${\Delta}^7$-sterol 14.28% and others 15.56% by method of planimetry. Campesterol 12.45%, stigmasteriol 5.40%, ${\beta}$-sitosterol 72.32% and ${\Delta}^7$-Sterol 9.83% by method of triangulation-and campesterol 13.00%, stigmasterol 3.76%, ${\beta}$-sitosterol 74.57% and ${\Delta}^7$ sterols 8.67% by method of planimetry of perilla oil. Contents of totalsterol in Korean edible oils were 0.82% by rape, 0.58% by sesame and 0.45% by perilla, respectively.

• Korean Chemical Engineering Research
• /
• v.43 no.5
• /
• pp.595-602
• /
• 2005

In order to purify diethylene glycol as main impurity included in p-dioxanone, SLE (solid-liquid equilibria) and mixture density on two components system of p-dioxanone and diethylene glycol were measured and a layered melt crystallization with seed has been applied. The SLE of p-dioxanone and diethylene glycol were a simple eutectic system and the temperature and PDX concentration at eutectic point were 0.08 and 246 K, respectively. Densities of their binary mixtures were well fitted by the best correlation equation, ${\rho}_l=0.405+1.361x+0.002T-0.004xT$. In the melt crystallization, the growth rate (G) was proportional to the 1.5th power of the subcooling degree. The effective distribution coefficient ($K_{eff}$) as the degree of impurity removal was observed to increase with increasing the growth rate and initial p-dioxanone concentration. And also, $K_{eff}$ was correlated with Z function using Wintermantel's model such as $K_{eef}=-0.0604+6.392{\times}Z$. Finally, PDX purity through the optimization of this process can be obtained over 99%.

• Journal of the Microelectronics and Packaging Society
• /
• v.20 no.4
• /
• pp.13-16
• /
• 2013

A lot of various researches have been going on to use heat spreader for LED module. Nano porous aluminum anodic oxide (AAO) applied LED, which is produced from anodization, is easy and economically advantageous. Convensional LED module is consist of aluminum/adhesive/copper circuit. The polymer adhesive in this module is used as heat spreader. However the thermal emission of LED component is degraded because of low heat conductivity of polymer and also reliability of LED component is reduced. Therefore, AAO in this work was applied to heat spreader of LED module which has higher heat conductivity compare to polymer. Bonding strength between AAO and copper circuit was improved with Ti/Cu seed layer by copper sputtering process (DBC) before the bonding. And this copper circuit has been fabricated by electro plating method. Peel strength of AAO and copper circuit in this work showed range between 1.18~1.45 kgf/cm with anodizing process which is very suitable for high power LED application.

• Korean Journal of Materials Research
• /
• v.20 no.5
• /
• pp.262-266
• /
• 2010

ZnO nanostructures were grown on an Au seed layer by a hydrothermal method. The Au seed layer was deposited by ion sputter on a Si (100) substrate, and then the ZnO nanostructures were grown with different precursor concentrations ranging from 0.01 M to 0.3M at $150^{\circ}C$ and different growth temperatures ranging from $100^{\circ}C$ to $250^{\circ}C$ with 0.3 M of precursor concentration. FE-SEM (field-emission scanning electron microscopy), XRD (X-ray diffraction), and PL (photoluminescence) were carried out to investigate the structural and optical properties of the ZnO nanostructures. The different morphologies are shown with different growth conditions by FE-SEM images. The density of the ZnO nanostructures changed significantly as the growth conditions changed. The density increased as the precursor concentration increased. The ZnO nanostructures are barely grown at $100^{\circ}C$ and the ZnO nanostructure grown at $150^{\circ}C$ has the highest density. The XRD pattern shows the ZnO (100), ZnO (002), ZnO (101) peaks, which indicated the ZnO structure has a wurtzite structure. The higher intensity and lower FWHM (full width at half maximum) of the ZnO peaks were observed at a growth temperature of $150^{\circ}C$, which indicated higher crystal quality. A near band edge emission (NBE) and a deep level emission (DLE) were observed at the PL spectra and the intensity of the DLE increased as the density of the ZnO nanostructures increased.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.106-106
• /
• 1999

반도체 소자가 소브마이크론 이하로 집적화 되어감에 따라, RC 신호 지연 및 간섭 현상, 전력 소비의 증가 문제가 심각하게 대두되고 있다. 이러한 문제를 개선하기 위해서는, 현재 층간 절연막으로 상용화되어 있는 SiO2 박막을 대체할 저유전율 박막의 개발이 필수적이며, 많은 연구자들이 여러 가지 새로운 유기물질과 무기물질은 제안하고 있다. 반도체 공정상의 적합성을 고려할 때, 이들 여러물질 중에서 알킬기를 함유한 SiO2 박막(이하 'Si-O-C-H 박막'으로 표기)에 많은 관심이 집중되고 있다. Si-O-C-H 박막은 알킬기에 의해 형성된 나노 스케일의 기공에 의해 작은 유전율을 가지게 된다. 따라서, 박막내의 알킬기의 함유량이 많을수록 보다 작은 유전율을 얻을 수 있다. 그러나 과다한 알킬기의 함유는 Si-O-C-H 박막의 열적 특성을 열화시키는 부정적인 효과도 있다. 본 연구에서는 bis-trimethylsilylmethane(BTMSM, H9C3-Si-CH2-Si-C3H9) precursor를 이용하여 Si-O-C-H 박막을 증착하였다. BTMSM precursor의 중요한 특징중 하나는, 두 실리콘 원자 사이에 Si-CH2 결합이 존재한다는 사실이다. Si-CH2 결합은 양쪽의 Si에 의해 강하게 결합되어 있어서, BTMSM precursor를 사용하여 Si-O-C-H 박막은 유전상수도 작을 뿐 아니라, 열적으로도 안정된 특성이 얻어질 것으로 기대된다. Si-O-C-H 박막의 열적 안정성을 평가하기 위하여, 고온 열처리 전후의 FT-IR 스펙트럼 분석과 C-V(capacitance-voltage) 측정에 의한 유전상수 변화를 살펴보았다. 또한 증착된 박막의 미세구조 및 step coverage 특성 관찰을 위하여 SEM(scanning electron microscopy) 및 TEM(transmission electron micfroscopy) 분석을 하였다. 변화하였으며 이는 포토루미네슨스의 변화의 원인으로 판단된다. 연구하였다. CeO2 와 Si 사이의 계면을 TEM 측정에 의해 분석하였고, Ce와 O의 화학적 조성비를 RBS에 의해 측정하였다. Si(100) 기판위에 증착된 CeO2 는 $600^{\circ}C$ 낮은 증착률에서 seed layer를 하지 않은 조건에서 CeO2 (200) 방향으로 우선 성장하였으며, Si(111) 기판 위의 CeO2 박막은 40$0^{\circ}C$ 높은 증착률에서 seed layer를 2분이상 한 조건에서 CeO2 (111) 방향으로 우선 성장하였다. TEM 분석에서 CeO2 와 Si 기판사이에서 계면에서 얇은 SiO2층이 형성되었으며, TED 분석은 Si(100) 과 Si(111) 위에 증착한 CeO2 박막이 각각 우선 방향성을 가진 다결정임을 보여주었다. C-V 곡선에서 나타난 Hysteresis는 CeO2 박막과 Si 사이의 결함때문이라고 사료된다.phology 관찰결과 Ge 함량이 높은 박막의 입계가 다결정 Si의 입계에 비해 훨씬 큰 것으로 나타났으며 근 값도 증가하는 것으로 나타났다. 포유동물 세포에 유전자 발현벡터로써 사용할 수 있음으로 post-genomics시대에 다양한 종류의 단백질 기능연구에 맡은 도움이 되리라 기대한다.다양한 기능을 가진 신소재 제조에 있다. 또한 경제적인 측면에서도 고부가 가치의 제품 개발에 따른 새로운 수요 창출과 수익률 향상, 기존의 기능성 안료를 나노(nano)화하여 나노 입자를 제조, 기존의 기능성 안료에 대한 비용 절감 효과등을 유도 할 수 있다. 역시 기술적인 측면에서도 특수소재 개발에 있어 최적의 나노 입자 제어기술 개발 및 나노입자를 기능성 소재로 사용하여 새로운 제품의 제조와 고압 기상 분사기술의 최적화에 의한 기능성 나노 입자 제조 기술을 확립하고 2차 오염 발생원인 유기계 항균제를 무기계 항균제로 대

• Journal of the Korean Vacuum Society
• /
• v.21 no.4
• /
• pp.205-211
• /
• 2012

We investigated the optical and hydrophobic properties of the deposited silver (Ag) zinc oxide (ZnO) nanorods (NRs) on flexible indium tin oxide (ITO) coated polyethylene terephthalate (PET) substrates (i.e., ITO/PET). The ZnO NRs were grown by an electrochemical deposition using a sputtered ZnO seed layer and the Ag was deposited by using a thermal evaporator. For comparison, the same fabrication process was carried out on the bare ITO/PET without ZnO NRAs. Due to the discrete surface of ZnO NRs, the deposited Ag was formed as nano-scale particles, while the Ag became film-like for bare ITO/PET. In order to control the size and amount of Ag particles, the Ag deposition time was changed from 100 to 600 s. When the deposition time was increased, the Ag particles became larger and denser, and the absorptance was increased. This enhanced absorptance may be due to the localized surface plasmon resonance of Ag particles. Furthermore, the relatively high hydrophobicity was observed for the deposited Ag on the ZnO NRs/ITO/PET. These improved optical and surface properties are expected to be useful for flexible photovoltaic and optoelectronic devices.