• International Journal of Aerospace System Engineering
• /
• 제2권2호
• /
• pp.73-78
• /
• 2015

According to the characteristic of carrier-based aircraft, the method of solving safe set during arresting landing is discussed in this paper based on optimal control and invariant set theory. The safe sets of carrier aircraft are evaluated in different states on the characteristic of longitudinal augmented system by using the level set method. Then, the influence on the boundary of safe set under various factors is analyzed. At last, the maneuverability envelope protection is established based on the corresponding theory, and the validity of the system is verified through simulation. The results demonstrate preliminarily that: compared with mass and thrust, the elevator is the greatest influence factor for the boundary of safe set; the dynamic trajectory of carrier-based aircraft can be located at the interior of safe set effectively with the maneuverability envelope protection.

• Journal of Animal Science and Technology
• /
• 제65권3호
• /
• pp.490-510
• /
• 2023

Feed safety is needed to produce and provide safe animal feeds for consumers, animals, and the environment. Although feed safety regulations have been set for each country, there is a lack of clear feed safety regulations for each livestock. Feed safety regulations are mainly focused on heavy metals, mycotoxins, and pesticides. Each country has different safe levels of hazardous materials in diets. Safe levels of hazardous materials in diets are mostly set for mixed diets of general livestock. Although there is a difference in the metabolism of toxic materials among animals, the safe level of feed is not specific for individual animals. Therefore, standardized animal testing methods and toxicity studies for each animal are needed to determine the correct safe and toxic levels of hazardous materials in diets. If this goal is achieved, it will be possible to improve livestock productivity, health, and product safety by establishing appropriate feed safety regulations. It will also provide an opportunity to secure consumer confidence in feed and livestock products. Therefore, it is necessary to establish a scientific feed safety evaluation system suitable for each country's environment. The chance of outbreaks of new hazardous materials is increasing. Thus, to set up appropriate toxic levels or safe levels in feed, various toxicity methods have been used to determine toxic levels of hazardous materials for humans and animals. Appropriate toxic testing methods should be developed and used to accurately set up and identify toxicity and safe levels in food and feed.

• 산업경영시스템학회지
• /
• 제13권22호
• /
• pp.71-78
• /
• 1990

Some problems to assess the safety of automated man-machine system are studied in many ways. The difficulty occurred in this system is the vagueness of human behavior. Fuzzy set theory is used to assess the human behavior in safety analysis. The unsafe behavior listed top 10 in accident statistics would be explained as the factors of human vagueness. Three cases are considered, which consist of man-machine system as man-man, man-machine, machine-machine types. For the design of safe task, using characteristics of work performance, each motion cycle time is required to know the rate of learning. Approach of human behavior to the standard motion means more safe motion. It is important to design the works as to minimize the time performance to the standard motion's, which utilize the control of risk potential with easy. In that process, use of fuzzy set theory is appropriate to analyze the human behavior to identify its vagueness.

• 한국군사과학기술학회지
• /
• 제13권6호
• /
• pp.1147-1152
• /
• 2010

This paper reports a safe and environmentally-benign demilitarization method for the K305 35mm CS gas grenades launcher set(also known as E-8 launcher). The launcher system was disposed by a two-step process; complete recovery of the explosive cords and the gas grenades from the launcher followed by incineration of the recovered items in the APE-1236 Flashing Furnace. All of the 64 grenades within the 16 tubes of the E-8 launcher were safely recovered and incinerated. In this study, 32 sets of the launcher were used to make a standard operating procedure for the safe demilitarization of the launcher system and the 35mm CS cartridges were all safely destroyed in the experimental burning tests meeting the related environmental regulations.

• 상하수도학회지
• /
• 제22권6호
• /
• pp.665-672
• /
• 2008

It is necessary to implement the management plan for the production of safe and high quality drinking water from lake Paldang. To set up the plan, the water quality items such as BOD, T-P, SS and coliform were monitored for ten years, 1997~2006, and the influence of raw water quality on the drinking water treatment process and the treated water quality was also evaluated from 2004 to 2006. In conclusion, water quality items such as turbidity(SS), T-P(eutrophication), pathogens(fecal coliforms, enterovirus, reovirus, giardia, cryptosporidium), DOC(precursor of disinfection by-products), and micro-pollutants(phthalates, VOCs, heavy metals) are should be managed to get safe and high quality drinking water from lake Paldang.

• 한국포장학회지
• /
• 제28권2호
• /
• pp.127-132
• /
• 2022

The growth of e-commerce market requires more delivery packagings, which protect goods from the damage factors on the delivery. In this study, we have analyzed the distribution environment data (vibration and impact) measured in previous study and compared with global standards (ISTA, ASTM), so that we developed the testing method for Field-to-Lab simulation suitable to the domestic delivery. In order to verify the efficacy of this method, we took the Field-to-Lab tests for 3 packaged products (detergents set, glass tableware set, small furniture), which has been frequent breakages or damages on the actual delivery by e-commerce order, so that we could find out the test results were similar to those of the actual delivery occasions. In addition, we could perform redesign and improvement of the parcel delivery packagings for safe transportation by taking this Field-to-Lab test repeatedly. This test methods was finally proposed to be Korean industrial standard (KS), and is expected to be useful as a designing tool for the packaging optimization between protecting goods and reducing packaging waste.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2008년도 International Symposium on Remote Sensing
• /
• pp.402-405
• /
• 2008

This paper is a proposal of Sentinel Asia for Environment (SAFE). The essential to this project is to help environmental agencies in Asia to set up an environmental monitoring system with satellite observation data. It is focused on an environmental issues originated from anthropogenic events detected as land cover and land use change in Asians' daily human life including; agriculture, global warming gas, urban environment and forest resources. It is leaded by Japan Aerospace Exploration Agency (JAXA) along with University of Tokyo and Asian Institute of Technology in Thailand under the umbrella of Sentinel Asia which is dedicated to disaster monitoring issues. It is expected to initiate a information outgoing through WWW for Asian countries to set up their national land information system focusing on environmental changes.

• 통합자연과학논문집
• /
• 제13권1호
• /
• pp.8-12
• /
• 2020

In this paper we study the Minimum Error Discrimination problem (MED) for ensembles of linearly independent (LI) pure states. By constructing a map from the set on those ensembles we show that the Pretty Good Measurement (PGM) and the optimal measurement for the MED are related by the map.

• 품질경영학회지
• /
• 제50권4호
• /
• pp.635-646
• /
• 2022

Purpose: In this study, the detailed implementation plan for product safety evaluation and management suggested by KS A ISO 10377 to reduce the risk of harm to consumers and users is presented so that companies can strategically implement it. Methods: In order to achieve the purpose of this study, the upper elements and detailed execution plans shown in KS A 10377 are classified into hierarchies and set as a decision hierarchy. A pairwise comparison is performed to derive it. Results: Among the top factors, 'design safety (D)' was the most important factor, with 0.314. Therefore, ensuring safety in the design stage that can prevent defects in advance is the most important action plan for companies to supply safe products. Conclusion: The results of this study, it is intended to help companies and related organizations more easily understand and continuously apply KS A ISO 10377.

• 한국강구조학회 논문집
• /
• 제17권3호통권76호
• /
• pp.271-283
• /
• 2005

익스팬션 앵커인 셋트앵커를 대상으로 실험을 통하여 전단내력에 대해서 고찰하였다. 실험은 연단거리와 앵커간격을 변수로 하여 진행하였으며 전단하중을 받는 앵커의 파괴모드는 연단거리와 앵커의 강성 및 직경에 영향을 받는 것으로 나타났다. 앵커와 모재인 콘크리트의 파괴모드는 앵커의 설계식에 중요한 요소이며, 본 실험에서는 앵커의 전단파괴와 콘크리트 단부파괴가 나타났다. 앵커의 전단강도는 ACI 318-02 설계기준과 EOTA 기준을 비교 검토하여 평가하였으며, 콘크리트 단부파괴강도는 CCD 방법과 기존의 ACI349-90 설계기준을 비교.검토하여 평가하였다. 셋트앵커의 실험결과, (1) 셋트앵커의 전단강도에서 앵커의 계수는 5% 파괴확률을 적용하여 0.684로 평가되었다. 그러므로 ACI318-02와 EOTA의 앵커의 전단강도에 대한 각각의 계수 0.6과 0.5는 안전 측으로 판단된다. 따라서 셋트앵커의 전단강도를 다음과 같이 제시한다. $V_s=0.684 A_{se}f_{ut}$(N). (2) 콘크리트 단부파괴강도 예측값은 CCD방법을 적용한 예측값이 비교적 실험값에 근접했다. 그러므로 CCD방법에 근거하여 5% 파괴확률을 적용한 셋트앵커의 콘크리트 단부파괴강도를 다음과 같이 제시한다. $V_b=0.609(\frac{\iota}{d_o})^{0.2}\sqrt{d_0}\sqrt{f_c}(c_1)^{1.5}$(N). (3) 앵커간격에 따른 콘크리트 단부파괴강도 추정 시 CCD 설계기준이 합리적인 설계방법으로 사료된다.