• International Journal of Aerospace System Engineering
• /
• v.2 no.2
• /
• pp.73-78
• /
• 2015

According to the characteristic of carrier-based aircraft, the method of solving safe set during arresting landing is discussed in this paper based on optimal control and invariant set theory. The safe sets of carrier aircraft are evaluated in different states on the characteristic of longitudinal augmented system by using the level set method. Then, the influence on the boundary of safe set under various factors is analyzed. At last, the maneuverability envelope protection is established based on the corresponding theory, and the validity of the system is verified through simulation. The results demonstrate preliminarily that: compared with mass and thrust, the elevator is the greatest influence factor for the boundary of safe set; the dynamic trajectory of carrier-based aircraft can be located at the interior of safe set effectively with the maneuverability envelope protection.

• Journal of Animal Science and Technology
• /
• v.65 no.3
• /
• pp.490-510
• /
• 2023

Feed safety is needed to produce and provide safe animal feeds for consumers, animals, and the environment. Although feed safety regulations have been set for each country, there is a lack of clear feed safety regulations for each livestock. Feed safety regulations are mainly focused on heavy metals, mycotoxins, and pesticides. Each country has different safe levels of hazardous materials in diets. Safe levels of hazardous materials in diets are mostly set for mixed diets of general livestock. Although there is a difference in the metabolism of toxic materials among animals, the safe level of feed is not specific for individual animals. Therefore, standardized animal testing methods and toxicity studies for each animal are needed to determine the correct safe and toxic levels of hazardous materials in diets. If this goal is achieved, it will be possible to improve livestock productivity, health, and product safety by establishing appropriate feed safety regulations. It will also provide an opportunity to secure consumer confidence in feed and livestock products. Therefore, it is necessary to establish a scientific feed safety evaluation system suitable for each country's environment. The chance of outbreaks of new hazardous materials is increasing. Thus, to set up appropriate toxic levels or safe levels in feed, various toxicity methods have been used to determine toxic levels of hazardous materials for humans and animals. Appropriate toxic testing methods should be developed and used to accurately set up and identify toxicity and safe levels in food and feed.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.13 no.22
• /
• pp.71-78
• /
• 1990

Some problems to assess the safety of automated man-machine system are studied in many ways. The difficulty occurred in this system is the vagueness of human behavior. Fuzzy set theory is used to assess the human behavior in safety analysis. The unsafe behavior listed top 10 in accident statistics would be explained as the factors of human vagueness. Three cases are considered, which consist of man-machine system as man-man, man-machine, machine-machine types. For the design of safe task, using characteristics of work performance, each motion cycle time is required to know the rate of learning. Approach of human behavior to the standard motion means more safe motion. It is important to design the works as to minimize the time performance to the standard motion's, which utilize the control of risk potential with easy. In that process, use of fuzzy set theory is appropriate to analyze the human behavior to identify its vagueness.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.6
• /
• pp.1147-1152
• /
• 2010

This paper reports a safe and environmentally-benign demilitarization method for the K305 35mm CS gas grenades launcher set(also known as E-8 launcher). The launcher system was disposed by a two-step process; complete recovery of the explosive cords and the gas grenades from the launcher followed by incineration of the recovered items in the APE-1236 Flashing Furnace. All of the 64 grenades within the 16 tubes of the E-8 launcher were safely recovered and incinerated. In this study, 32 sets of the launcher were used to make a standard operating procedure for the safe demilitarization of the launcher system and the 35mm CS cartridges were all safely destroyed in the experimental burning tests meeting the related environmental regulations.

• Journal of Korean Society of Water and Wastewater
• /
• v.22 no.6
• /
• pp.665-672
• /
• 2008

It is necessary to implement the management plan for the production of safe and high quality drinking water from lake Paldang. To set up the plan, the water quality items such as BOD, T-P, SS and coliform were monitored for ten years, 1997~2006, and the influence of raw water quality on the drinking water treatment process and the treated water quality was also evaluated from 2004 to 2006. In conclusion, water quality items such as turbidity(SS), T-P(eutrophication), pathogens(fecal coliforms, enterovirus, reovirus, giardia, cryptosporidium), DOC(precursor of disinfection by-products), and micro-pollutants(phthalates, VOCs, heavy metals) are should be managed to get safe and high quality drinking water from lake Paldang.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.28 no.2
• /
• pp.127-132
• /
• 2022

The growth of e-commerce market requires more delivery packagings, which protect goods from the damage factors on the delivery. In this study, we have analyzed the distribution environment data (vibration and impact) measured in previous study and compared with global standards (ISTA, ASTM), so that we developed the testing method for Field-to-Lab simulation suitable to the domestic delivery. In order to verify the efficacy of this method, we took the Field-to-Lab tests for 3 packaged products (detergents set, glass tableware set, small furniture), which has been frequent breakages or damages on the actual delivery by e-commerce order, so that we could find out the test results were similar to those of the actual delivery occasions. In addition, we could perform redesign and improvement of the parcel delivery packagings for safe transportation by taking this Field-to-Lab test repeatedly. This test methods was finally proposed to be Korean industrial standard (KS), and is expected to be useful as a designing tool for the packaging optimization between protecting goods and reducing packaging waste.

• Proceedings of the KSRS Conference
• /
• 2008.10a
• /
• pp.402-405
• /
• 2008

This paper is a proposal of Sentinel Asia for Environment (SAFE). The essential to this project is to help environmental agencies in Asia to set up an environmental monitoring system with satellite observation data. It is focused on an environmental issues originated from anthropogenic events detected as land cover and land use change in Asians' daily human life including; agriculture, global warming gas, urban environment and forest resources. It is leaded by Japan Aerospace Exploration Agency (JAXA) along with University of Tokyo and Asian Institute of Technology in Thailand under the umbrella of Sentinel Asia which is dedicated to disaster monitoring issues. It is expected to initiate a information outgoing through WWW for Asian countries to set up their national land information system focusing on environmental changes.

• Journal of Integrative Natural Science
• /
• v.13 no.1
• /
• pp.8-12
• /
• 2020

In this paper we study the Minimum Error Discrimination problem (MED) for ensembles of linearly independent (LI) pure states. By constructing a map from the set on those ensembles we show that the Pretty Good Measurement (PGM) and the optimal measurement for the MED are related by the map.

• Journal of Korean Society for Quality Management
• /
• v.50 no.4
• /
• pp.635-646
• /
• 2022

Purpose: In this study, the detailed implementation plan for product safety evaluation and management suggested by KS A ISO 10377 to reduce the risk of harm to consumers and users is presented so that companies can strategically implement it. Methods: In order to achieve the purpose of this study, the upper elements and detailed execution plans shown in KS A 10377 are classified into hierarchies and set as a decision hierarchy. A pairwise comparison is performed to derive it. Results: Among the top factors, 'design safety (D)' was the most important factor, with 0.314. Therefore, ensuring safety in the design stage that can prevent defects in advance is the most important action plan for companies to supply safe products. Conclusion: The results of this study, it is intended to help companies and related organizations more easily understand and continuously apply KS A ISO 10377.

• Journal of Korean Society of Steel Construction
• /
• v.17 no.3 s.76
• /
• pp.271-283
• /
• 2005

This paper concerns the prediction of shear capacity, as governed by steel failure and concrete breakout failure, of set anchors installed in plain concrete. For this purpose, the methods to evaluate the shear capacity of the set anchors in concrete are summarized and the experimental data are compared with capacities by the two present methods : the method of ACI349-90 and the Concrete Capacity Design (CCD) method. (1) The constant-0.684 in the steel strength equation of set anchor was determined from shear test data at the 5 percent fractile probability. Consequently, it was concluded that the constant-0.6 and 0.5 in the steel strength equation for steel failure of ACI318-02 and EOTA were safe. The nominal shear strength of set anchor was proposed as following. $V_s=0.684 A_{se}f_{ut}$. (2) The CCD method was considered reasonable in estimating the concrete breakout strength of set anchors. In terms of the CCD method, the nominal concrete breakout strength of set anchor in shear was provided as follows; $V_b=0.609(\frac{\iota}{d_o})^{0.2}\sqrt{d_0}\sqrt{f_c}(c_1)^{1.5}$(N). (3) The CCD method was considered reasonable in estimating the concrete breakout strength for spacing of set anchors. The proposed equation was considered safe in estimating the concrete breakout strength for spacing of set anchors.