• The Transactions of the Korean Institute of Power Electronics
• /
• v.16 no.6
• /
• pp.610-617
• /
• 2011

This paper proposes a novel and direct dead-time compensation method of the 3-phase inverter using space vector pulse width modulation(SVPWM) topology. The proposed dead-time compensation method directly compensates the dead-time to the turn-on time of the effective voltage vector according to the current direction of the medium voltage reference. Each phase voltages are determined by the switching times of the effective voltage vectors, and the practical switching times have loss according to the current direction by the dead-time effect in the 3-phase inverter. The proposed method adds the dead-time to the switching time of the effective voltage vector according to the current direction, so it does not require complex d-q transform and controller to compensate the voltage error. The proposed dead-time compensation scheme is verified by the computer simulation and experiments of 3-phase R-L load.

• Journal of Power Electronics
• /
• v.15 no.5
• /
• pp.1235-1243
• /
• 2015

This paper presents a modified Space Vector Pulse Width Modulation Technique (SVPWM), which solves the well-known problem of voltage imbalance in the capacitors of a single-phase multilevel inverter. The proposed solution is based on the measurement of DC voltage levels at each capacitor of the inverter DC bus. The measurements are then used to adjust the size of the active vectors within the SVPWM algorithm to keep the voltage waveform sinusoidal regardless of any voltage imbalance on the DC link capacitors. When a voltage deviation exceeds a predetermined hysteresis band, the correspondent voltage vector is restricted to restore the voltage level to an acceptable threshold. Hence, the need for external voltage regulators for the voltage capacitors is eliminated. The functionality of the proposed algorithm is successfully demonstrated through simulations and experiments on a grid tied application.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.1406-1409
• /
• 2004

The Resolver usually used in industry is the absolute angle analog sensor that must be in order to driving BLDC (brushless DC) motor, and it needs RDC(Resolver-to-Digital converter) for changing the output signal to digital to be applied to the SVPWM(Space Vector Pulse Width Modulation) algorithm. Commonly used S/W RDC needs trigonometric function. What it takes a lot of calculation time of processor is gotten at weak point. In this paper, S/W RDC is realized except trigonometric functions as a result of feedback resolver outputs after filtering using FIR filter. thus, processing time is reduced. So, One-chip DSP Controller operating the Vector Control, RDC, and SVPWM can be designed.

• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.561-562
• /
• 2011

인 휠 모터를 이용하여 구동되는 전기차량은 각 모터의 동기 제어가 요구된다. 기존의 마이크로컨트롤러는 구동시킬 수 있는 모터의 개수가 제한되어 인 휠 모터를 이용하여 구동되는 전기차량과 같은 다축 제어 시스템에 적용하기가 어렵다. 따라서 본 논문에서는 FPGA(Field Programmable Gate Array)를 이용하여 4축 동기 SVPWM 기법을 구현하였으며, 시뮬레이션을 통하여 성능을 확인하였다.

• Proceedings of the KIPE Conference
• /
• 2004.07b
• /
• pp.620-624
• /
• 2004

Th is paper presents a systematical approach to study carrier based PWM techniques (CPWM) in diode-clamped and cascade multilevel inverters by using the proposed multi-modulating pattern method. This method is based on the vector correlation between CPWM and space vector PWM (SVPWM) and applicable to both multilevel inverter topologies. The CPWM technique can be described in a general mathematical equation, and obtain the same outputs similarly as of corresponding SVPWM. Control of the fundamental voltage, vector redundancies and phase redundancies in multilevel inverter can be formulated separately in the CPWM equation. The deduced CPWM can obtain a full vector redundancy control, and fully utilize phase redundancy in a cascade inverter. In the paper, CPWM equations and corresponding algorithm for generating multi-modulating signals will be performed, in which SVPWM attributes will be presented by corresponding controllable factors.

• Proceedings of the KIEE Conference
• /
• 2005.05a
• /
• pp.236-238
• /
• 2005

In this paper, we propose a new discrete-time predictive current controller for a PMLSM(permanent magnet linear synchronous motor). The main objectives of the current controllers are that the measured stator current is tracked the command current value accurately and the transient interval is shorten as much as possible, in order to obtain high-performance of ac drive system. The conventional predictive current controller is hard to implement in full digital current controller since a finite calculation time causes a delay between the current sensing time and the time that take to apply the voltage to motor. A new control strategy is the schema that gets the fast adaptation of transient current change, the fast transient response tracking. Moreover, the simulation results will be verified the improvements of Predictive controller and accuracy of the current controller.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.61 no.1
• /
• pp.47-54
• /
• 2012

This paper presents implementation of SVPWM technique for three phase Voltage Source Inverter using FPGA. Software-based vector-control calculations much this drawback, in order to improve the hardware-vector-control tries. Without the need for additional software, vector control algorithm is designed to be modular SOPC, and DSP will reduce most of the operations. In this paper, the SVPWM that using HDL for the AC motor vector control algorithm level, and the dead time part and the speed control in order to controled a speed detector and designed in the form of modules. Then ALTERA corporation Cyclone III series EP3C16F484 can be verified by implemented.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.69-72
• /
• 2002

In this study, We proposed high efficiency wind power generator system for induction generator used SVPWM swiching inverter. First, We propose Equivalient Circuit for Induction Generator, it's characteristics equation, and power equation of slip. In addition, we suggest Pick Power Traction Slip control methods, adapted variable wind power system. We study simulation result for the proposed system and output power by slip effect. and we identify SVPWM of suitable wind power system by comparison between SPWM and SVPWM Consequently, we show that the system control result from variable wind power is suitable.

• Proceedings of the KIEE Conference
• /
• 2002.11d
• /
• pp.317-319
• /
• 2002

In this study, We proposed high efficiency wind power generator system for induction generator used SVPWM swiching inverter. First, We propose Equivalient Circuit for Induction Generator, it's characteristics equation, and power equation of slip. In addition, we suggest Pick Power fraction Slip control methods, adapted variable wind power system. We study simulation result for the proposed system and output power by slip effect. and we identify SVPWM of suitable wind power system by comparison between SPWM and SVPWM. Consequently, we show that the system control result from variable wind power is suitable.

• Proceedings of the KIPE Conference
• /
• 2004.11a
• /
• pp.64-69
• /
• 2004

This paper deals with an algorithm for controlling ac output voltage of Z-source inverter using Modified SVPWM (abbreviated as MSVPWM). Unlike the conventional space vector pulse width modulation, MSVPWM has one extra shoot-through zero time $T_{sh}$. During shoot-through zero time, both switches in a leg are conducted simultaneously in order to boost inverter output voltage to any desirable value regardless the line voltage. The algorithm to control linearly the capacitor voltage is suggested to improve the performance of Z-source inverter system. The performance of Z-source inverter using above algorithms is demonstrated in simulation results using PSIM. Index terms-Z-source inverter (ZSI), shoot-through time, three-phase carrier-based PWM, space vector PWM (SVPWM), modified space vector PWM (MSVPWM).