• Korean Chemical Engineering Research
• /
• 제44권4호
• /
• pp.356-362
• /
• 2006

본 연구에서는 석탄가스화복합발전(integrated gas combined cycle, 이하 IGCC) 시스템의 석탄가스화기로부터 생산되는 석탄가스가 환원제로 이용되는 $SO_2$ 환원공정인 직접 황 회수 공정(direct sulfur recovery process, 이하 DSRP)에서 이용 가능한 Sn-Zr계 촉매 상에서의 $SO_2$ 환원반응특성을 조사하였다. Sn-Zr계 촉매는 0/1, 1/4, 1/1, 2/1, 3/1, 1/0의 Sn/Zr 몰비로 조절하여 침전법 및 공침법으로 제조되었다. 공간속도가 $10,000ml/g_{-cat.}{\cdot}h$, 반응물 몰비$([CO(or\;H_2)]/[SO_2])$가 2.0인 반응조건 하에서 Sn-Zr계 촉매를 이용하여 온도를 변화시킨 가운데 석탄가스에 포함되어 있는 $H_2$ 또는 CO를 환원제로 사용하여 $SO_2$ 환원에 대한 반응특성이 조사되었다. 실험 결과, 환원제의 종류에 상관없이 $SnO_2$와 $ZrO_2$보다 Sn-Zr계 촉매가 활성이 더 높았으며, 환원제의 종류에 대한 반응성 조사 결과, $H_2$보다 CO가 $SO_2$ 환원에 더 높은 반응성을 나타내었다. $H_2$가 환원제로 이용된 $SO_2$ 환원특성을 조사한 결과, Sn/Zr 비에 따라 제조된 Sn-Zr계 촉매의 종류에 상관없이 온도가 증가함에 따라 반응성이 증가하는 경향을 보이며 Sn/Zr 몰비가 1/4인 촉매를 사용한 경우 $550^{\circ}C$에서 $SO_2$전환율이 94.4％, 원소 황 수율이 66.4％로 높은 반응성을 나타내었다. 반면 CO를 환원제로 이용한 경우에는 Sn/Zr 몰비가 높은 촉매일수록 최적 반응온도가 감소되는 특이한 경향을 나타내었다. Sn-Zr계 촉매 중 Sn/Zr 몰비가 3/1인 $SnO_2-ZrO_2$ 촉매가 가장 낮은 최적 반응온도에서 높은 반응성을 나타내었는데, $325^{\circ}C$에서 $SO_2$전환율이 약 100％, 원소 황 수율이 약 99.5％로 가장 높은 반응성을 얻었다. 그리고 CO가 $H_2$보다 더 많이 포함되어 있는 석탄모사가스에 대하여 환원제로서의 이용가능성을 확인하고자 $CO/H_2$ 비를 달리한 각각의 합성가스에 대하여 $SO_2$ 환원반응실험을 수행하였다. Sn/Zr 몰비가 2/1인 Sn-Zr계 촉매 상에서 $SO_2$ 환원반응 실험 결과, CO 함량이 높은 합성가스일수록 효과적인 환원제임을 확인할 수 있었다. 따라서 Sn-Zr계 촉매가 적용된 DSRP에서 석탄모사가스가 환원제로 이용 가능하다는 것을 알 수 있었다.

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2003년도 춘계총회 및 연구발표회 초록집
• /
• pp.100.1-100
• /
• 2003

• 마이크로전자및패키징학회지
• /
• 제15권4호
• /
• pp.31-39
• /
• 2008

캐비티 형성이 불필요한 MEMS 캡 본딩을 위해 전기도금법을 이용하여 Cu/Sn rim 구조를 형성하였으며, $25{\sim}400{\mu}m$ 범위의 rim 폭에 따른 본딩특성을 분석하였다. Cu/Sn rim의 폭이 증가함에 따라 rim 패키지 내부의 유효 실장면적비가 감소하는 반면에 파괴하중비가 증가하며, Cu/Sn rim 폭이 150 ${\mu}m$일 때 유효 실장면적비와 파괴하중비를 최적화할 수 있을 것으로 예측되었다. 폭 25 ${\mu}m$ 및 폭 50 ${\mu}m$인 Cu/Sn rim 접합부에서는 모든 계면에서 본딩이 이루어진 반면에, 100 ${\mu}m$ 이상의 폭을 갖는 rim 접합부에서는 Sn 도금표면의 거칠기에 의해 본딩이 이루어지지 않은 기공 부위가 관찰되었다.

• 한국환경과학회지
• /
• 제25권5호
• /
• pp.737-744
• /
• 2016

For electrolysis process using an insoluble electrode, electrochemical performance was greatly affected by the manufacturing method and procedure, such as the firing temperature, pre-treatment, type of precursor solution, coating method, electrode material, etc. Components of the electrode therein is one of the most important factors in electrochemical reaction. To achieve such characteristics, a appropriate ratio of the electrode material should be carefully chosen. The aim of this research was to apply experimental design method in the optimization of electrode component for the maximum generation of oxidants in electrochemical oxidation process. Mixture design, especially expanded simplex lattice design, in DOME (design of mixture experiments) with Design Expert - commercial software - was used to analyze the data. Analysis of variance (ANOVA) showed a high coefficient of determination ($R^2$) value of 0.9470, thus ensuring a satisfactory adjustment of the $3^{rd}$ order special cubic regression model with the experimental data. The application of response surface methodology (RSM) yielded the following regression equation, which is an empirical relationship between the TRO generation concentration and independent variables(mol ratio of 3 electrode components) in a real unit: TRO generation concentration $(mg/L)=TRO\;conc.=98.25{\times}[Ir]+49.71{\times}[Sn]+95.29{\times}[Sb]-16.91{\times}[Ir]{\times}[Sn]-29.47{\times}[Ir]{\times}[Sb]-22.65{\times}[Sn]{\times}[Sb]+703.19{\times}[Ir]{\times}[Sn]{\times}[Sb]$. The optimized formulation of the 3 component electrode for an high TRO (total residual oxidants) generation was acquired at mol ratio of Ir 0.406, Sn 0.210, Sb 0.384 (desirability d value, 1).

• Elastomers and Composites
• /
• 제52권4호
• /
• pp.287-294
• /
• 2017

Nanocomposites based on $SnO_2-Mn$ were synthesized by the reaction of tin (II) chloride dihydrate and manganese (II) chloride tetrahydrate at a molar ratio of 10:1 in the presence of ammonium hydroxide at $80^{\circ}C$. The $SnO_2-Mn$ nanocomposites were stirred with fullerene [$C_{60}$] in a mass ratio of 2:1 in tetrahydrofuran to prepare $SnO_2-Mn-C_{60}$ nanocomposites; these nanocomposites were obtained upon heating the mixture of $SnO_2-Mn$ nanocomposites and fullerene [$C_{60}$] in an electric furnace at $700^{\circ}C$ for 2 h. The synthesized $SnO_2-Mn-C_{60}$ nanocomposites were confirmed through various characterization methods such as X-ray diffraction and scanning electron microscopy. The photocatalytic activities of the $SnO_2-Mn-C_{60}$ nanocomposites were demonstrated by the degradation of the organic dyes BG, MB, MO, and RhB under 254 nm irradiation and evaluated using UV-Vis spectrophotometry.

• 한국분말재료학회지
• /
• 제25권6호
• /
• pp.507-513
• /
• 2018

This study investigates the viability of using a Na-ion battery with a tin(Sn) anode to mitigate the vulnerability caused by volume changes during discharge and charge cycling. In general, the volume changes of carbon material do not cause any instability during intercalation into its layer structure. Sn has a high theoretical capacity of $847mAh\;g^{-1}$. However, it expands dramatically in the discharge process by alloying Na-Sn, placing the electrode under massive internal stress, and particularly straining the binder over the elastic limit. The repeating strain results in loss of active material and its electric contact, as well as capacity decrease. This paper expands the scope of fabrication of Na-ion batteries with Sn by fabricating the binder as an auxetic structure with a unique feature: a negative Poisson ratio (NPR), which increases the resistance to internal stress in the Na-Sn alloying/de-alloying processes. Electrochemical tests and micrograph images of auxetic and common binders are used to compare dimensional and structural differences. Results show that the capacity of an auxetic-structured Sn electrode is much larger than that of a Sn electrode with a common-structured binder. Furthermore, using an auxetic structured Sn electrode, stability in discharge and charge cycling is obtained.

• 대한안전경영과학회지
• /
• 제10권2호
• /
• pp.211-216
• /
• 2008

Using this model, SN ratio of taguchi method for each of subjective factors as well as values of weights are used in this comprehensive positioning method for product. A example is presented to illustrate the model and to show a rank reversal when compared to a model that eliminates the highest and lowest customers' values allocating the weights and the subjective factors.

• 품질경영학회지
• /
• 제26권2호
• /
• pp.17-26
• /
• 1998

Taguchi's parameter design is a method for quality improvement by making the performance fo a system robust to noise. Parameter design with dynamic characteristics has been recently the subject of much interest. This paper is concerned with a review and a generalization of the Signal-to-Noise (SN) ratio, a quality measure for parameter design with dynamic characteristics, proposed by Taguchi. We present a method for determination and analysis of the generalized SN ratio and illustrate its implementation by example.

• 한국전기전자재료학회논문지
• /
• 제23권12호
• /
• pp.956-960
• /
• 2010

CuO doped $WO_3-SnO_2$ thick film gas sensors were fabricated by screen printing method on alumina substrates and heat-treated at $350^{\circ}C$ in air. The effects of mixing ratio of $WO_3$ with $SnO_2$ on the structural and morphological properties of $WO_3-SnO_2$ were investigated X-ray diffraction and Scanning Electron Microscope. The structural properties of the $WO_3-SnO_2$:CuO thick film by XRD showed that the monoclinic of $WO_3$ and the tetragonal of $SnO_2$ phase were mixed. Nano CuO was coated on the $WO_3-SnO_2$ surface and then the surface of $WO_3$ was coated with $SnO_2$ particles with $1\sim1.5{\mu}m$ in diameters, as confirmed form the SEM image. The sensitivity of the $WO_3-SnO_2$:CuO sensor to 2000 ppm $CO_2$ gas and 50 ppm $H_2S$ gas for the various ratio of $WO_3$ and $SnO_2$ was investigated. The 4 wt% CuO doped $WO_3-SnO_2$(75:25) tkick films showed the highest sensitivity to $CO_2$ gas and $H_2S$ gas.

• 대한치과교정학회지
• /
• 제15권2호
• /
• pp.175-195
• /
• 1985

Vertical and horizontal growth occur in the craniofacial complex which ensues continuous changes in facial morphology, until the end of active growth period. Longitudinal study for individual is essential, in the research on growth and development, however, the difficulties in obtaining long term subjects in Korea, the research has been limited. The author analyzed the cephalometric roentgenogrems of 43 boys and 47 girls taken from the ages 6 to 10. The subjects were divided into 3 groups according to SN-MP angle and 2 groups according to gonial angle. In this longitudinal study, 21 variables were measure 4. The obtained results were as follows: 1. SN-MP angle and genial angle had no significant changes in each group with age. 2. With age, facial convexity of hard tissue decreased in all groups, facial angle of hard tissue increased in low SN-MP angle group, but facial convexity of soft tissue had no significant changes in all groups with age. 3. In comparison of high SN-MP angle group and low SN-MP angle group, the former had greater facial convexity and smaller facial angle than the latter. 4. SN-MP angle and the ratio of posterior dental height to anterior dental height had reverse correlation in all groups. 5. High genial angle group revealed larger SN-MP angle, anterior dental height facial convexity, but smaller mandibular length, and the ratio of posterior dental height to anterior dental height compared with low genial angle group.