• Korean Journal of Materials Research
• /
• v.12 no.2
• /
• pp.117-120
• /
• 2002

We investigated the possibility of direct bonding of the Si ∥SiO$_2$/Si$_3$N$_4$∥Si wafers for Oxide-Nitride-Oxide(ONO) gate oxide applications. 10cm-diameter 2000$\AA$-thick thermal oxide/Si(100) and 500$\AA$-Si$_3$N$_4$LPCVD/Si (100) wafers were prepared, and wet cleaned to activate the surface as hydrophilic and hydrophobic states, respectively. Cleaned wafers were premated wish facing the mirror planes by a specially designed aligner in class-100 clean room immediately. Premated wafer pairs were annealed by an electric furnace at the temperatures of 400, 600, 800, 1000, and 120$0^{\circ}C$ for 2hours, respectively. Direct bonded wafer pairs were characterized the bond area with a infrared(IR) analyzer, and measured the bonding interface energy by a razor blade crack opening method. We confirmed that the bond interface energy became 2,344mJ/$\m^2$ when annealing temperature reached 100$0^{\circ}C$, which were comparable with the interface energy of homeogenous wafer pairs of Si/Si.

• Journal of Korean society of Dental Hygiene
• /
• v.7 no.3
• /
• pp.213-230
• /
• 2007

The purpose of this study was to examine the state of infection control provided to members of Korean Dental Hygienists Association. The subjects in this study were dental hygienists who attended a symposium on July 1. 2006. after a survey was conducted, the answer sheets from 489 participants were analyzed, and the findings of the study were as follows: 1. Possession of disinfection room was being(72.7%), and person of infection control was zero(52.9%). Number of sterilizer was one(62.2%). 2. As a repetition choice, type of sterilizer was autoclave(97.9%), UV sterilizer(67.4%) and EO gas sterilizer(21.4%). As a repetition choice, infection materials was ethanol(84.1%). 3. Water tube of unit and chair was using of sterilized water(42.9%). Sterilizing of compressed air was no(69.0%). 4. Re-using of disposal was not using(62.5%), re-using disposal was suction tip(28.2%)(repetition choice) 5. In sterilization of instruments, hand-piece was every using time(28.4%), and reamer-file, bur, mirror, pincette, explorer, hand scaler and ultrasonic scaler were high in every using time. 6. Individual protection was high of using, cleaning of hands before treatment was every treatment(87.0%). Type of soap was liquid type in dental clinic(48.2%), infection soap in dental hospital(41.2%) and solid soap in public health center(50.6%). Answered that they need regular oral health education, and 82.9% respondents answered that they need oral health technicians in school. And 87.8% respondents needed individual oral health education for the benefit of better oral health.

• Journal of the Korean Magnetics Society
• /
• v.19 no.4
• /
• pp.152-155
• /
• 2009

Ba-Ferrite single crystals were prepared and the magnetic and thermal properties were characterized by Mossbauer spectroscopy. The single crystal layer was cut in the c-axis and radiated to the surface by ${\gamma}$-rays for Mossbauer spectroscopy. We found out that the spin states in Fe ions were parallel to the ${\gamma}$-rays direction and the whole crystal bulk formed only one crystal with the same spin direction. $M\"{o}ssbauer$ spectra in single crystal have only 4 sets of 4 absorption lines in each Fe site when the ${\gamma}$-rays have the same radiation direction with the c-axis in the crystal, and there was no 2b-site spectrum. The zero absorption of 2b-site means that there was a fast diffusion motion in a double-well atomic potential at room temperature, in which bipyramidal Fe ions have the two minima at each side mirror plane.

• Journal of Internet of Things and Convergence
• /
• v.8 no.5
• /
• pp.41-46
• /
• 2022

This study analyzed the results and implications of the industry-university cooperation human resource nurturing process based on the I-O model for the Motion Graphics major and the Global Hotelier major in Baek seok University. In this study, based on the analysis of the human resources training performance through industry-university cooperation in the motion graphics and hotelier fields for 5 years, what kind of efforts were made for successful human resource training, and the level of performance was analyzed and improvement points were suggested. In this study, four strategies were set for successful industry-university-tailored human resource nurturing: student-industry matching through industry participation in education, industry-university integrated education, education quality advancement, and customized education infrastructure construction. As a result of the analysis, customized human resource training should first be developed through industry demand survey and a mirror-type practice room should be built to fit the corporate environment. Second, it was found that it is possible to be individual only if there is an active participation of industry experts throughout the curriculum such as subjects and non-subjects.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.20-20
• /
• 2003

We developed 30 ㎽-AlInGaN based violet laser diodes. The fabrication procedures of the laser diodes are described as follows. Firstly, GaN layers having very low defect density were grown on sapphire substrates by lateral epitaxial overgrowth method. The typical dislocation density was about 1-3$\times$10$^{6}$ /$\textrm{cm}^2$ at the wing region. Secondly, AlInGaN laser structures were grown on LEO-GaN/sapphire substrates by MOCVD. UV activation method, instead of conventional annealing, was conducted to achieve good p-type conduction. Thirdly, ridge stripe laser structures were fabricated. The cavity mirrors were formed by cleaving method. Three pairs of SiO$_2$ and TiO$_2$ layers were deposited on the rear facet for mirror coating. Lastly, laser diode chips were mounted on AlN submount wafers by epi-down bonding method. The lifetime of the laser diodes was over 10,000 hrs at room temperature under automatic power controlled condition. We expect the performance of the LDs to be improved by the optimization of the growth and fabrication process. The detailed characteristics and important issues of the laser diodes will be discussed at the conference.

• Korean Journal of Materials Research
• /
• v.10 no.10
• /
• pp.665-670
• /
• 2000

Linear annealing method was developed to increase the bond strength of Si wafer pair mated at room tem­perature instead of conventional furnace annealing method. It has been known that the interval of the two mating wafer surfaces decreases and the density of gaseous phases generated at the interface increases with increase in an-nealing temperature. The new annealing method consisting of one heat source and light reflecting mirror used these two phenomena and was applied to Si$\mid$$\mid$Si and Si$\mid$$\mid$$SiO_2/Si$ bonding. The bonding interface observed directly by using IR camera and HRTEM showed clear bonding interface without any unbonded areas except the area generated by the dusts inserted into the mating interface at the room temperature. Crack opening method and direct tensile test was ap­pplied to measure the bond strength. The two methods showed similar results. The bond strength increased continuous­tly with the increase of annealing temperature.

• Journal of the Korea Computer Graphics Society
• /
• v.26 no.3
• /
• pp.133-142
• /
• 2020

In this research, we describe the method of implementing a 360-degree panorama using one projector, in terms of hardware and in the production of projected pre-distortion images. We propose a method of installing a projector and a reflector on the central ceiling of the space to minimize the shadows generated based on the position of the spectators. We used a virtual camera and virtual space where the projector and hemisphere positions were set to the same as in the exhibition space in Unity. After the image projected on the screen was mapped on the wall of the virtual space, the pre-distortion image was created by the method of capturing from the virtual camera using the ray tracing technique. When the produced pre-distortion image is hemispherical reflected and projected by the projector installed at the same position as the virtual camera, the image is reflected and projected 360 degrees on the panoramic screen.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.4
• /
• pp.301-307
• /
• 2002

Direct bonded SOI wafer pairs with $Si ll SiO_2/Si_3N_4 ll Si$ the heterogeneous insulating layers of SiO$_2$-Si$_3$N$_4$are able to apply to the micropumps and MEMS applications. Direct bonding should be executed at low temperature to avoid the warpage of the wafer pairs and inter-diffusion of materials at the interface. 10 cm diameter 2000 ${\AA}-SiO_2/Si(100}$ and 560 $\AA$- ${\AA}-Si_3N_4/Si(100}$ wafers were prepared, and wet cleaned to activate the surface as hydrophilic and hydrophobic states, respectively. Cleaned wafers were pre- mated with facing the mirror planes by a specially designed aligner in class-100 clean room immediately. We employed a heat treatment equipment so called fast linear annealing(FLA) with a halogen lamp to enhance the bonding of pre mated wafers We kept the scan velocity of 0.08 mm/sec, which implied bonding process time of 125 sec/wafer pairs, by varying the heat input at the range of 320~550 W. We measured the bonding area by using the infrared camera and the bonding strength by the razor blade clack opening method, respective1y. It was confirmed that the bonding area was between 80% and to 95% as FLA heat input increased. The bonding strength became the equal of $1000^{\circ}C$ heat treated $Si ll SiO_2/Si_3N_4 ll Si$ pair by an electric furnace. Bonding strength increased to 2500 mJ/$\textrm{m}^2$as heat input increased, which is identical value of annealing at $1000^{\circ}C$-2 hr with an electric furnace. Our results implies that we obtained the enough bonding strength using the FLA, in less process time of 125 seconds and at lowed annealing temperature of $400^{\circ}C$, comparing with the conventional electric furnace annealing.

• Journal of English Language & Literature
• /
• v.58 no.2
• /
• pp.249-277
• /
• 2012

Eugene O'Neill's one-act play Before Breakfast (1916) depicts a morning scene of a married couple who live in a slovenly flat at Greenwich Village. There is no apparent dramatic action occurring in the play. Instead, the play is full of Mrs. Rowland's incessant complaints about her husband Alfred's loafing around bars with artists friends, neglecting his role as breadwinner. An irony is that every morning she prepares breakfast for the good-for-nothing husband even in the moment of complaining. It is worth noting that Alfred is an 'unseen character' who is never directly observed by the audience but is only described by her wife. Deprived of all chances to speak and present himself on stage, he is kept in the room throughout the play. In contrast, Mrs. Rowland dominates the stage, monopolizing language and action. The audience has to listen to her, judge from her statements, and take her one-sided complaints. The accused husband, with zero chance of showing up and defending himself, has no choice but to be the sinner as the wife intends. Another irony is that the audience's feeling about the situation is quite different from what is expected. The wife's complaints are regarded to be unfair and groundless in the reason that the situation is monopolized by her. In case of the husband, in contrast, the loss of voice and presence stresses the injustice of his dead-lock situation. In other words, the 'absent' quality of Alfred works to evoke the audience's sympathy for himself and subsequently makes his presence recognized, not visually but emotionally, by the audience throughout the play. Discovered in this paradoxical moment where the spectators understand or 'see' the status of the unseen and the devoiced message is successfully conveyed to the listeners, is the theatricality of absence. Adding to the function as theatrical device, the 'unseen character' Alfred works as a device of self-reflection to mirror the author's own life. Alfred, the alter-ego of O'Neill, effectively exorcises the author's life-long feeling of guilty as the unfaithful husband and father in the unhappy first marriage, successfully evoking the audience's sympathy for himself.

• English & American cultural studies
• /
• v.18 no.4
• /
• pp.103-137
• /
• 2018

Harold Pinter's One for the Road(1984) is a play about violence. Nicholas, who appears to be the manager of a place, interrogates Victor, Nicky, and Victor's wife Gila in a room for one day from morning to night. There is no direct physical violence in this play. But hints about the atrocities that took place outside the stage make the audience guess the violence and cruelty. Violence, which is not seen as such, is the central theme of the play. One for the road is worth reading as a resistance to breaking the mirror of global ideology, not as it deals with violent events confined to Turkey. The problem which Pinter had in mind, in particular, is that the United States plays a leading role in producing world-class ideologies, and that Britain is involved in collusion with the United States in cultivating such ideological fantasies, both abroad and at home. This thesis analyzes the contrasting reactions of each character in the play based on this social context. In particular, the conflicting reactions of the characters on the system are the most important conflict in the drama. Nicolas is a manager who moves on the system without seeing the truth. Victor and his family, on the other hand, do not move within the same ideology as Nicholas. This paper will take a look at what their strategies of resistance is and how they are revealed in the work. In fact, Nicholas appears split. Nicholas seemingly reacted decisively to the interpellation of the system. He expresses his belief and respect for the legitimacy of his actions. However, he has repeatedly sought the respect and love of Victor. Nicholas is now swaying. The theme that Nicholas presents consciously by grabbing at his own sway is 'Patriotism.' But this fantasy splits through Victor's silence and death demands. Therefore, the questions to be answered are: So why does Nicolas appear to be torn apart in a system that directs violence? But why is he forced to assimilate into the system? What other figures imply? To answer these questions, this thesis will take Slavoj Zizek's view of ideology. On the other hand, there are previous studies that read the system of violence in One for the road from the Althusser's perspective. Surely, this play explores the role of Ideological State Apparatus. However, from the point of view of Althusser, it is not possible to read Nicholas's division and the point of resistance seen by Victor's family. Pinter does not limit the scope of the ideological system as a closed one that regenerates ideologies, but secures the domain of main body resistance and struggle. On the other hand, there are already several domestic theses that read Pinter's work in Zizek's perspective. But these theses are mainly focused on analysis of Mountain Language. What this thesis would suggest is that there is a potential for an ethical figure of Zizek to be considered in One for the Road.